Single coat definition

Single coat means one film coating applied to a metal surface.
Sample 1Sample 2Sample 3
Single coat means a single film of coating applied directly to the substrate omitting the primer application.
Sample 1Sample 2Sample 3
Single coat means only one film of coating is applied to the metal substrate.
Sample 1Sample 2Sample 3

Examples of Single coat in a sentence

  • Single coat red-oxide paint will be applied first after due surface cleaning of rust.

  • Single coat applicationThe recommended method of application is by heavy-duty airless spray equipment.

  • Single coat application The recommended method of application is by heavy-duty airless spray machines.

  • Single coat cement plastersurface finish, coated with plaster primer and two coats of external quality paint finish.

  • Single coat cement plaster as surface finish, coated with plaster primer and two coats ofinternal quality paint finish to match wall colour.

  • Single coat cold fluid-applied sheet waterproofing can be used on both vertical and horizontal structural foundation walls and decks.

  • Single coat surfacedressing (first coat)128.009.000.12 to 0.1452.Second coat surfacedressing107.008.000.06 to 0.10However, the actual quantity of binder used in surface dressing shall be designed on the basis of inspection and site conditions, and the extra quantity of binder above as specified in Table: 500-2 2 shall be paid separately as per BOQ item.

  • Single coat curing application for all cast-in-place; precast; slab on grade/above grade/below grade; vertical and horizontal concrete structures; and structural concrete.

  • Single coat uniformly spread in entire area over a coat of approved PU prime /epoxy primer in two coats at specific locations where geotextile reinforcement is placed.

  • Single coat cement plasteras surface finish, coated with plaster primer and two coats of internal quality paint finish.


More Definitions of Single coat

Single coat means a single film of coating applied directly to the material being coated omitting the prime coat application.
Sample 1Sample 2Sample 3
Single coat means a single film coating applied directly to the metal substrate omitting the prime coat.
Sample 1Sample 2Sample 3
Single coat means only one film of coating applied on the metal substrate.
Sample 1Sample 2Sample 3
Single coat means a single film of coating applied directly to the metal substrate omitting the primer application. (b) This Regulation applies to application area(s), flashoff area(s), and oven(s) of large appliance coating lines involved in prime, single, or topcoat coating operations.‌ (c) This Regulation does not apply to the use of quick-drying lacquers for repair of scratches and nicks which occur during assembly, if the volume of coating does not exceed one quart in any eight-hour period.‌ (d) Emissions of volatile organic compounds from any large appliance coating line subject to this Regulation shall not exceed 4.5 pounds of volatile organic compounds per gallon of solids‌delivered to the coating applicator from prime, single, or topcoat coating operations.
Sample 1
Single coat means a single film of coating applied directly and Physical Agents - Biological Exposure Indices (199[6]7), pages to the metal substrate omitting the primer application. [13 - 38]15 - 40."
Sample 1
Single coat means a single film of coating applied directly to the metal substrate omitting the
Sample 1

Related to Single coat

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Hair mousse means a hairstyling foam designed to facilitate styling of a coiffure and provide limited holding power.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Single Source means an individual, partnership, corporation, association, labor organization, or any other organization or group of persons which is not a political committee or political party.

  • Prime coat means the first of two or more films of coating applied to a metal surface.

  • Non-Methane Hydrocarbons (NMHC means the sum of all hydrocarbon air pollutants except methane.

  • Specialty coating means a coating that is used for unusual job performance requirements, usually in small amounts. These products include but are not limited to adhesion primers, resist coatings, soft coatings, reflective coatings, electrostatic prep coatings, headlamp lens coatings, ink pad printing coatings, stencil coatings, texture coatings (automotive), vacuum metalizing coatings, and gloss flatteners.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.