Silviculture Survey Procedures Manual definition

Silviculture Survey Procedures Manual means the manual developed and produced by the Province as a reference for methodology, data collection, and compilation for silviculture surveys, as amended from time to time.
Silviculture Survey Procedures Manual means the manual developed and produced by Silvicon Services Inc. as a reference for methodology, data collection, and compilation for silviculture surveys, as amended from time to time.

Examples of Silviculture Survey Procedures Manual in a sentence

  • If the median height is less than 2m; the countable height is 30% times the median height, if the median height is greater than 2m; the countable height is 50% times the median height (as per the most current Silviculture Survey Procedures Manual-).

  • Silviculture Survey Procedures Manual - Section 3.2: Preliminary Stratification and Section 3.8.1: Field Stratification.

  • Plots should be established “representatively” as per the representative sampling methodology outlined in the Silviculture Survey Procedures Manual.

  • Any survey procedures not specifically referenced in this FFT Survey Standard document, will default to the Silviculture Survey Procedures Manual, as referenced in the text of this document.

  • This procedure is outlined as well in the Silviculture Survey Procedures Manual.

  • In reference to Appendix 13.2 and figure 3 of the Silviculture Survey Procedures Manual, the amount of allowable countable broadleaf trees will increase from 5 to 10 broadleaf trees per 3.99m.

  • Survey methodology and tree acceptability criteria as specified in the Resource Practices Branch, Silviculture Survey Procedures Manual, dated April 1, 2011, and as amended from time to time shall apply, unless specified or varied through provisions of this FSP.2) Approved District Policy Shall Apply Approved Central Cariboo and Chilcotin Forest District policies with reference to survey procedures and the assessment of free growing stands as developed and/or amended from time to time shall apply.

  • Unless otherwise specified in this Schedule, the Contractor will stratify the Work Area(s) as set out in the Preliminary Stratification and Field Stratification sections of the Silviculture Survey Procedures Manual.

  • All contents and sections of this document pertaining to specific FFT Survey Standards, will supersede any similar content and section procedures stated in the Silviculture Survey Procedures Manual.

  • B.1.2 Partial Cutting – Even-aged Stocking Standards Where retention is greater than 5 m2/ha and less than required to be considered uneven-aged management, then even-aged stocking standards will be applied as identified in Table 7, and layered survey methodology will apply as per the Silviculture Survey Procedures Manual.

Related to Silviculture Survey Procedures Manual

  • MERS Procedures Manual The MERS Procedures Manual, as it may be amended, supplemented or otherwise modified from time to time.

  • Procedures Manual means the standards and procedures manual described in Section 11.3.

  • Policies and Procedures means the written policies and procedures of the Client in any way related to the Services, including any such policies and procedures contained in the Organic Documents and the Offering Documents.

  • Project Operational Manual means the Project Operational Manual, to be adopted in accordance with Section 6.01 (a) of this Agreement, giving details of guidelines and procedures agreed with the Association for the implementation, supervision, and monitoring and evaluation, of the Project, and the procurement procedures and guidelines for Sub-Projects, as same may be amended from time to time in agreement with the Association, and such term includes any schedules to the Project Operational Manual;

  • Operational Manual means the manual referred to in Section 3.03 of this Agreement;

  • Project Operations Manual or “POM” means the Recipient’s manual referred to in Section I.D of Schedule 2 to this Agreement, as such manual may be amended from time to time with the agreement of the Association.

  • Diagnostic clinical procedures manual means a collection of written procedures that describes each method (and other instructions and precautions) by which the licensee performs diagnostic clinical procedures; where each diagnostic clinical procedure has been approved by the authorized user and includes the radiopharmaceutical, dosage, and route of administration.

  • Project Implementation Manual or “PIM” means the manual setting out the measures required for the implementation of the Project, as the same may be amended from time to time, subject to prior approval of the Association;

  • Operating Manual means the document that contains the procedures and forms for the operation of bungee jumping equipment and activity at a site.

  • AML/KYC Procedures means the customer due diligence procedures of a Reporting Finnish Financial Institution pursuant to the anti-money laundering or similar requirements of Finland to which such Reporting Finnish Financial Institution is subject.

  • Technical Guidance Letter or “TGL” means an instruction, clarification, or interpretation of the requirements of the Contract, issued by the System Agency to the Grantee.

  • Procurement Guidelines means the “Guidelines: Procurement under IBRD Loans and XXX Credits” published by the Bank in May 2004 and revised in October, 2006.

  • Program Manual means the United States Department of Agriculture, Animal and Plant Health Inspection Service, Plant Protection and Quarantine, Gypsy Moth Program Manual, 1994 edition.

  • PJM Manuals means the instructions, rules, procedures and guidelines established by the Office of the Interconnection for the operation, planning, and accounting requirements of the PJM Region and the PJM Interchange Energy Market. PJM Region:

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Operations Manual means a manual containing procedures, instructions and guidance for use by operational personnel in the execution of their duties;

  • Regulatory Flood Protection Elevation means the “Base Flood Elevation” plus the “Freeboard”. In “Special Flood Hazard Areas” where Base Flood Elevations (BFEs) have been determined, this elevation shall be the BFE plus two (2) feet of freeboard. In “Special Flood Hazard Areas” where no BFE has been established, this elevation shall be at least two (2) feet above the highest adjacent grade.

  • Environmental Guidelines means the environmental guidelines and occupational health and safety standards of the World Bank Group as in effect on [Bid Date].

  • Construction Plans means plans, drawings, specifications and related documents, and construction schedules for the construction of the Project, together with all supplements, amendments or corrections, submitted by the Developer and approved by the City in accordance with this Agreement.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Basic health plan model plan means a health plan as required in RCW 70.47.060(2)(e).

  • Participating Certified Clinical Nurse Specialist means a Certified Clinical Nurse Specialist who has a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.