Side Guards definition

Side Guards guards that are fitted between the front and rear axles of a Lorry and that comply with EC Directive 89/297/EEC and the Road Vehicles (Construction and Use) Regulations 1986;
Sample 1Sample 2Sample 3
Side Guards means safety equipment designed to protect vulnerable road users from the hazards of open spaces on the sides of large trucks.
Sample 1Sample 2
Side Guards means guards that are fitted between the front and rear axles of a Lorry and that comply with EC Directive 89/297/EEC and the Road Vehicles (Construction and Use) Regulations 1986 as set out in Schedule 13 (Extension of Services); “Silver Accreditation” means the intermediate level of accreditation within the FORS Standard, the requirements of which are more particularly described at: www.fors- xxxxxx.xxx.xx as set out in Schedule 13 (Extension of Services); “Statement of Requirements” means the requirements for the Services set out in schedule 2 (Statement of Requirements);
Sample 1

Examples of Side Guards in a sentence

  • Car Enclosure: Side Guards of platform shall have a steel frame with a powder coat finish and panel inserts to a minimum of 42 inches high.

  • Total Number of Trucks to be Outfitted: Note: Maximum number of Side Guards per applicant cannot exceed 10 Side Guards (10 Trucks), or as approved by the Side Guard Program Administrator.

  • Truck Side Guards Resource Pagewww.volpe.dot.gov/sites/volpe.dot.gov/files/docs/Cambridge_Announces_Safer_Truck_Partnership_with_Volpe_FINAL.

  • Have Side Guards fitted, unless it can be demonstrated to the reasonable satisfaction of the Employer, that the Lorry will not perform the function, for which it was built, if Side Guards are fitted.

  • Funding will not be offered to applicants that purchase Side Guards and then either self-install or have the Side Guards installed outside the program approved vendors without program administration approval.• Any awarded incentives will cover up to 50% of the per-truck side guard purchase and installation price, up to a maximum of$2,000 per qualifying truck.• Maximum number of Side Guards per applicant cannot exceed 10 Side Guards (10 Trucks) per funding round or as approved by the Program Administrator.

  • Side Guards Figure 2.29 Section A-BDetail “X”C A For IVECO sectionDB Either the bottom part of the auxiliary frame is over 1,300 mm from the ground or the width of the auxiliary subframe is less than the external space occupied by the tyres.C Test load 1 kN Permitted sag values under test load:≤ 30 mm on the rear, included in the last 250 mm of the device≤ 150 mm on the remaining parts of the device D Supporting structure for the combinedfastening of the side guard and rear mudguard.

  • Potential for Side Guards to Reduce Injury Severity for Pedestrians and CyclistsSide guards have been required on some large commercial vehicles in the United Kingdom (U.K.) and in Europe since the 1980s, in response to cycling and pedestrian fatalities involving large commercial vehicles in urban areas.

  • Exchanger shall include a temperature switch.o Wintriss Shadow 8 Light Curtains with Fixed Side Guards – Electronic barrier mounted at the front of the press attached to side guards on both sides of the press frame allowing operator access to only the front of the work area.o Guided Platen System - Four Post Guided Platen with an Upper Tooling Plate: 26” L-R x 15” F-Bo Table and Platen Machining – Provide ¾” t-slots in the Moving Platen and Table of the press.

  • The deadline to complete installation of Side Guards is April 15, 2022.• Incentive amounts will be distributed to the program approved vendor upon vendor receipt of applicant’s matching funds; completion of a work certificate by the vendor; and applicant’s final acceptance of the Side Guard work performed on the up-fitted vehicle.• Completion of this application and submission of all supporting documentation does not guarantee that you will receive program funding.

  • If applications for Side Guard funding exceeds available funds, the Program Administrator reserves the right to reduce the maximum number of Side Guards per applicant.• All approved applicants have 30 days from the date of application approval to complete installation of Side Guards on the Qualifying Truck(s) or the grant incentive will be forfeited.


More Definitions of Side Guards

Side Guards guards that are fitted between the front and rear axles of a Lorry and that comply with EC Directive 89/297/EEC and the Road Vehicles (Construction and Use) Regulations 1986; Schedule 13 – TfL Enforcement Agent Policy “Silver Accreditation” the intermediate level of accreditation within the FORS Standard, the requirements of which are more particularly described at: xxx.xxxx-xxxxxx.xxx.xx
Sample 1
Side Guards means safety equipment designed to protect vulnerable road users from the hazards of open spaces on the sides of large trucks.Commented [CWP7]: BPS Recommendation: Clearly define solid waste to align with DEQ and include landfill- bound materials, recyclables and compostables.
Sample 1
Side Guards means guards that are fitted between the front and rear axles of a Large Vehicle and that comply with EC Directive 89/297/EEC and the Road Vehicles (Construction and Use) Regulations 1986.
Sample 1

Related to Side Guards

  • Curbside “Curb” means that portion of the right-of-way adjacent to paved or traveled roadways, including the end of a driveway, curb line or alley line. Containers will be placed as close to the roadway as practicable without interfering with or endangering the movement of vehicles or pedestrians.

  • Floodproofing means any combination of structural and nonstructural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitation facilities, structures, and their contents.

  • School building means any building in which any of the instruction, extracurricular activities, or training provided by a school is conducted, whether or not any instruction, extracurricular activities, or training provided by the school is being conducted in the school building at the time a criminal offense is committed.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Incinerator means any enclosed device that: