Sheet metal definition

Sheet metal means heating, ventilation, air conditioning, pollution control, fume hood systems and related ducted systems or installation of equipment associated with any component of a sheet metal system. “Sheet metal” excludes refrigeration and electrical lines and all natural gas, propane, liquid propane, or other gas lines associated with any component of a sheet metal system.
Sheet metal means the erection, installation and repairing of all ferrous or nonferrous duct work and all other materials used in all air conditioning; and
Sheet metal means heating, ventilation, air conditioning, pollution control, fume hood systems and related ducted systems or installation of equipment associated with any component of a sheet metal system. “Sheet metal” excludes refrigeration and electrical lines

Examples of Sheet metal in a sentence

  • General: Sheet metal flashing and trim assemblies shall withstand wind loads, structural movement, thermally induced movement, and exposure to weather without failure due to defective manufacture, fabrication, installation, or other defects in construction.

  • Sheet metal materials shall be free of pitting, seam marks, roller marks, stains, discolorations, and other imperfections.

  • Duct Attachments: Sheet metal screws, blind rivets, or self-tapping metal screws; compatible with duct materials.

  • General: Sheet metal flashing and trim assemblies as indicated shall withstand wind loads, structural movement, thermally induced movement, and exposure to weather without failure due to defective manufacture, fabrication, installation, or other defects in construction.

  • EX-3 Introduction & demonstration of tools used in Sheet metal working shop.

  • Sheet metal ducts shall be fabricated as per ISI Standards/SMACNA out of galvanized steel sheets.

  • Sheet metal boxes: Galvanized steel, except where otherwise shown.

  • SHEET METAL WORK Sheet metal ducting required for air distribution system is shown in drawings forming part of these specifications.

  • Sheet metal, plastic, or moisture resistant fiber sleeves shall be provided for pipe passing through floors, interior walls, and partitions, unless brass or steel pipe sleeves are specifically called for below.

  • Description: Sheet metal, complying with UL 870 and NEMA 250, Type 1 unless otherwise indicated, and sized according to NFPA 70.


More Definitions of Sheet metal

Sheet metal means fenders, hoods, doors, deck lids, tailgates, head lamps, tail lamps, marker lamps, mirrors, quarters, trim pieces specified on the customer’s invoice.
Sheet metal. BRAINERD: • Thanksgiving, Thursday, November 25, 2021. Any work performed shall be paid at two (2) times the base taxable wage rate. • Christmas Day and New Year’s Day will be a paid holiday for all sheet metal workers provided the employee is an employee of the Employer on the working day prior to and immediately following the Holiday (including those who are on vacation, sick or disabled, but not including those on Workers Compensation). Each qualifying employee shall receive eight (8) hours of pay at the employee’s base rate as defined by the Brainerd Area Labor Agreement.

Related to Sheet metal

  • Scrap metal means ferrous or nonferrous metal, or items that contain ferrous or nonferrous metal, that are sold or offered for sale for the value of the ferrous or nonferrous metal they contain rather than their original intended use; ferrous or nonferrous metal removed from or obtained by cutting, demolishing, or disassembling a building, structure, or manufactured item; or other metal that cannot be used for its original intended purpose but can be processed for reuse in a mill, foundry, die caster, or other manufacturing facility.

  • Metal means precious metal, including, without limitation, gold, silver, platinum, palladium, rhodium, iridium, and ruthenium.

  • NCC means the National Capital Commission;

  • Precious Metal means the following, in coin, bullion, or other form:

  • Precious metals means silver, gold, platinum, palladium, iridium, osmium, rhodium, and ruthenium.

  • FCL means Containers said to contain Full Container Load.

  • HEPA filter means a high efficiency particulate absolute air filter capable of trapping and retaining 99.97 percent of fibers greater than 0.3 micrometers in mass median aerodynamic diameter equivalent.

  • Flashpoint means the minimum temperature at which a liquid gives off a vapor in sufficient concentration to ignite when tested as follows:

  • IFB means invitation for bids

  • OPWC means the Ohio Public Works Commission created pursuant to Revised Code Section 164.02.

  • Mercury means elemental mercury (Hg(0), CAS No. 7439-97-6);

  • Salmonid means of, belonging to, or characteristic of the family Salmonidae, which includes the salmon, trout, and whitefish.

  • ABI means Anheuser-Busch InBev SA/NV, its domestic and foreign parents, predecessors, divisions, subsidiaries, affiliates, partnerships and joint ventures (excluding Crown, and, prior to the completion of the Transaction, Modelo); and all directors, officers, employees, agents, and representatives of the foregoing. The terms “parent,” “subsidiary,” “affiliate,” and “joint venture” refer to any person in which there is majority (greater than 50 percent) or total ownership or control between the company and any other person.

  • PPB is the lump sum present value of the pension benefits (whether or not vested) that would be payable under the Pension Plans in the form of a straight life annuity beginning at the earliest date permitted under the Pension Plans, computed on the basis that the Executive’s actual age at termination of employment is his attained age as of his last birthday that would occur during the Remaining Unexpired Employment Period, that his service for benefit accrual purposes under the Pension Plans is equal to the aggregate of his actual service plus the Remaining Unexpired Employment Period, that his average compensation figure used in determining his accrued benefit is equal to the highest annual rate of salary achieved by the Executive during the period of three (3) years ending immediately prior to the date of termination, that the Executive’s life expectancy at the earliest date on which payments under the Pension Plans could begin is the Assumed Life Expectancy and that the interest rate assumption used is equal to the 30-Year Treasury Rate. The Pension Severance Payment shall be made within five (5) business days after the Executive’s termination of employment and shall be in lieu of any claim to any actual increase in his accrued benefit in the Pension Plans in respect of the Remaining Unexpired Employment Period;

  • Slow sand filtration means a process involving passage of raw water through a bed of sand at low velocity (generally less than 0.4 meters per hour) resulting in substantial particulate removal by physical and biological mechanisms.

  • LSD means lysergic acid diethylamide.

  • Cat means the consolidated audit trail contemplated by SEC Rule 613.

  • PCB means Polychlorinated Biphenyl. Dioxin-like PCBs are the non-ortho and mono-ortho PCBs listed in the table below.

  • GLJ means GLJ Petroleum Consultants Ltd.;

  • SFTR means Regulation (EU) 2015/2365 of the European Parliament and of the Council of 25 November 2015 on transparency of securities financing transactions and of reuse and amending Regulation (EU) No 648/2012;

  • Net meter means an appropriate energy meter capable of recording both import & export of electricity or a pair of meters one each for recording the import and export of electricity as the case may be;

  • Direct filtration means a series of processes including coagulation and filtration but excluding sedimentation resulting in substantial particulate removal.

  • Obsolete Inventory means items that have expired, are redundant or

  • Consumer product means a chemically formulated product used by household and institutional consumers including, but not limited to, detergents; cleaning compounds; polishes; floor finishes; cosmetics; personal care products; home, lawn, and garden products; disinfectants; sanitizers; aerosol paints; and automotive specialty products; but does not include other paint products, furniture coatings, or architectural coatings. As used in this article, the term “consumer product” shall also refer to aerosol adhesives, including aerosol adhesives used for consumer, industrial, and commercial uses.

  • EG means the Enforcement Guide;