Sanding sealers definition

Sanding sealers means any coatings formulated for and applied to bare wood for sanding and to seal the wood for subsequent application of varnish. To be considered a sanding sealer a coating must be clearly labelled as such.
Sample 1Sample 2Sample 3
Sanding sealers means clear or semi-transparent wood coatings labeled and formulated for application to bare wood to seal the wood and to provide a coat that can be abraded to create a smooth surface for subsequent application of coatings. A sanding sealer that also meets the definition of a lacquer is not included in this category, but is included in the lacquer category.
Sample 1Sample 2Sample 3
Sanding sealers. (摻砂封固底劑) means clear wood architectural coatings that are formulated for or applied to bare wood for sanding and to seal the wood for subsequent application of coatings;
Sample 1

Examples of Sanding sealers in a sentence

  • Sealers: Waterproofing sealers - not more than 250 g/L; Sanding sealers - not more than 275 g/L; All other sealers - not more than 200 g/L.

  • Product Category Description: Sanding sealers are clear coatings applied to bare wood to seal the wood and provide a coat that can be sanded smoothly.

  • These documents were all published before the filing date of the patent.

  • Sanding sealers shall be applied where necessary to achieve smooth surface before spraying using approved Ghana Standard for lacquer or varnish.


More Definitions of Sanding sealers

Sanding sealers means clear wood coatings formulated and recommended for application to bare wood to seal the wood and to provide a coating that can be sanded to create a smooth surface.
Sample 1

Related to Sanding sealers

  • Playing Season means the period between the date on which the first competitive fixture in the Competition is played each year until the date on which the last competitive fixture in the Competition is played.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Ozone season means the period of time beginning May 1 of a year and ending on September 30 of the same year, inclusive.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Freeboard means a factor of safety usually expressed in feet above a flood level for purposes of floodplain management. "Freeboard" tends to compensate for the many unknown factors that could contribute to flood heights greater than the height calculated for a selected size flood and floodway conditions, such as wave action, blockage of bridge or culvert openings, and the hydrological effect of urbanization of the watershed.

  • Point of common coupling means the point which the distributed generation facility is connected to the EDU's system.