Sampling rate definition

Sampling rate means the frequency with which the automation system samples the various parameters. It represents the number of events that are measured within 1 second for each parameter.

Sampling rate means the volume rate at which stack gases are drawn through a sampling train.

Sampling rate means the volume rate at which stack gases are drawn through a sampling train. "Sampling train" means a combination of entrapment devices, instruments, and auxiliary

Examples of Sampling rate in a sentence

• Sampling rate for measurement of piglet thermoregulatory behavior.

• Sampling rate minimum for this data shall be one sample per cycle.

• Indicator 2: Sampling rate by mark type for each fishery estimated.

• The Sampling rate for the Factory acceptance tests shall be minimum 10% of the batch size (minimum 1) for all items.

• Libraries offer numerous methods for locating an item – online catalogs, databases, A-Z e- journal lists, and OpenURL link resolvers – that retrieve different formats and results.

• Sampling rate was chosen to be very high (usually 10MSa/S) to allow a better data analysis.

• Measurement process: Radar sensor Measuring range (drop size): 0.3 mm 5.0 mmLiquid precipitation resolution: 0.01 mm Precipitation types: Rain, snowRepeatability: Typically > 90%Response threshold: 0.002 mmSampling rate: Event-dependent on reaching response threshold Precipitation intensity: 0 … 200 mm/h; Sampling rate 1 min, resol.

• All projects should have some money budgeted for Preliminary Engineering to cover VDOT environmental and plan review charges.

• Sampling rate should be either 44.1 kHz or 48 kHz. Bit rate should be either 16 or 24 bit.

• Sampling rate 1 sec / 10 sec (internal sampling frequency 15Hz) Generation of average value 1 – 10 minutesGeneration of max/min value 1 – 10 minutes based on the internal 1 secmeasurementsUnit °Response threshold 0.3 m/s Request channels:Note: The second measurements are averaged over 10 seconds for the output of the current (act) measurement.

More Definitions of Sampling rate

Sampling rate means how many times the logger samples per second.

Sampling rate. Select the sampling rate you will use. The choices for “Sampling rate” will depend on the device you select for “Driver.” “Out Channel” Select the output channels. This setting will always be a pair such as 1-2 or 3-4. The choices will depend on the device you select for “Driver.”

Sampling rate. A sampling rate constraint is a discrete constraint. It constrains the step size such that repetitive, prede xxx time instants are exactly hit. This can be useful in co-simulation, for instance, when a modelled control unit reads a sensor value every x milliseconds. FMU Max Step Size: This constraint implements the getMaxStepSize method from [BBG+13, CLB+16] providing a prediction of the maxi- mal step size that a given FMU instance can perform at a given point in time. It limits the need to roll back a simulation, because each FMU participates in deciding the step size, and therefore all of them are ca- pable of performing the determined step size. It is enabled by default and it constrains the step size as follows: size = min({getMaxStepSize(i) | ∀i ∈ instances}) As previously described in Deliverable 4.2b [PBLG16], stability is an impor- tant aspect of any simulation both for the detection and ability to handle otherwise unstable co-simulations. The XXX has the ability to detect some cases that may lead to an unstable model. In Year 3 it has also been up- graded to handle some models that it previously could not simulate because the model became unstable. Further detail on the stabilization techniques are described in Section 2.5 and in the Mass Spring Damper example i De- liverable D3.6 [MGP+17].