Sample Characteristics definition

Sample Characteristics. Means and standard deviations for the variables are given in Table 2 for the samples combined and individually. Statistical comparisons of the offender and community samples revealed that the only significant differences obtained from independent samples t-tests were that the offender sample reported higher levels of TriPM Disinhibition (t(104.10) = 3.56, p <.001), whereas the community sample reported higher levels of UPPS-P Sensation Seeking (t(121.76) = 3.79, p < .001).
Sample 1
Sample Characteristics. Means, standard deviations, and results of t-test comparisons between men and women for demographic and psychometric measures are presented in Table 1. There were no significant differences between men and women for age, education, ethnicity/ race, PTSD symptom level, whether they met full criteria or subsyndromal PTSD or use of psychiatric medications (as indicated in Table 1).
Sample 1
Sample Characteristics. To protect the most valuable and irreplaceable specimens in the RePORT India Common Protocol, many consortia have Central Biorepository requests for specimens from certain groups of Common Protocol participants (e.g., Cohort B TB activation cases, Cohort B TB activation cases who enrolls in Cohort A, pediatric active TB cases, TB treatment failure or early relapse, etc.) may trigger additional review by the RePORT International Specimen Allocation Committee. Mark the types of participants whose specimens are targeted by this request as well as the number of participants in each category. Cohort A general (number of requested participants  ) Cohort B general (number of requested participants  _) Cohort A diabetic (number of requested participants  _) Cohort A non-diabetic (number of requested participants  ) Cohort B diabetic (number of requested participants  ) Cohort B non-diabetic (number of requested participants  ) Cohort A TB treatment failure (number of requested participants  ) Cohort A TB early relapse (number of requested participants  ) Cohort B TB activation cases (number of requested participants  ) Cohort B TB activation cases who enroll in Cohort A (number of requested participants  ) Pediatric Cohort A (active TB) aged 5 years or younger (number of requested participants  ) Pediatric Cohort A (active TB) aged 6 - 14 years (number of requested participants  ) Pediatric Cohort B (HHCs) aged 5 years or younger (number of requested participants  ) Pediatric Cohort B (HHCs) aged 6 - 14 years (number of requested participants  ) HIV co-infected Cohort A (number of requested participants  ) HIV co-infected Cohort B (number of requested participants  ) Other (specify  (number of requested participants  ) Expected number of Person-Visits to be studied:   Expected number of unique participants to be studied   Will this project require serial specimens with explicitly stated comparisons? Yes No If “Yes,” please explain:   Sample Type * NOTE: Specimens previously thawed for other initiatives may be shipped. If unacceptable, give a reason below for requiring specimens not previously thawed. Leftover material cannot be returned to the Central Biorepository without prior approval from the Repository Program Officer and the RePORT EC. PBMC Plasma PAXgene RNA Other:   mtb isolate Sputum Urine Saliva Whole blood (DNA) QuantiFERON Sample Quantity: Minimum:   Optimum:   PROJECT ABSTRACT Sho...
Sample 1

Examples of Sample Characteristics in a sentence

  • Data Sample Characteristics The 46 primary studies in our meta-sample are based on 20 different databases, which differ in terms of geographic coverage and types of firm represented.

  • Table 3.1.2. Sample Characteristics by Age and Sex Age months (Mean)Sex (Proportion Female)Temporal The following table (Table 3.1.3) presents the study sample characteristics by status as Native Hawaiian or Other Pacific Islander (NHPI) race and indigenous ethnicity.

  • Table 3.1.3. Sample Characteristics by NHPI Race and Indigenous Status*Location(Athabascan, Cupik, Inupiaq,Siberian, or Yupik) InterventionOptimized78.8581.00 The following table (Table 3.1.4) presents the top three ethnic groups for each location by jurisdiction and intervention group.

  • We performed no procedures to reconcile any differences that may exist between various Sources for any of the Sample Characteristics listed on Exhibit 1 to Attachment A.

  • For the purpose of comparing the land FT and building FT Sample Characteristics, the Property Manager, on behalf of the Issuers, instructed us to round the land FT and building FT, both as shown on the 2021-1 Data File, to the nearest square foot.

  • Compared the Sample Characteristics listed on Exhibit 1 to Attachment A, as shown on the Data File, to the corresponding information located in, or to the corresponding information we recalculated using information located in, the Source Documents, subject to the instructions, assumptions and methodologies provided by the Sponsor, on behalf of the Depositor, described in the notes to Exhibit 1 to Attachment A.

  • For the purpose of comparing the land FT and building FT Sample Characteristics, the Property Manager, on behalf of the Issuers, instructed us to round the land FT and building FT, both as shown on the 2019-1 Data File, to the nearest square foot.

  • The Depositor is responsible for the Subject Matter, Provided Data Files, Application Status Decode Schedule, Security Interest Mapping File, Source Documents, Sample Characteristics and the determination of the instructions, assumptions and methodologies that are described herein.

  • For the purpose of comparing the indicated Sample Characteristics for each Sample Automobile Loan Contract, the Sponsor, on behalf of the Depositor, instructed us to ignore differences of +/- $1.00 or less.

  • For the purpose of comparing the indicated Sample Characteristics for each Sample Automobile Loan Contract, the Sponsor, on behalf of the Depositor, instructed us to only consider account activity shown in the Servicing System Screen Shots that occurred on or prior to the Cutoff Date.


More Definitions of Sample Characteristics

Sample Characteristics. Means were generated to present the results for the sample characteristics. The means were used to indicate variations of respondents based on level of education, period taken to receive essential medicines, number of employees working in organization, customers/Patients attended to daily and period of existence of organisation. Table 4.1: Means for Sample Characteristics Sample CharacteristicsManufacturers &National Medical Stores Sample characteristics averages were generated for the sample characteristics that affected the supply chain of essential medicines. According to the level of education, the responses from Manufacturers & National Medical Stores revealed that the average level of education in these organisations was a bachelors degree (Mean=5.38). Results form the health centres/hospitals and patients revealed that the average level of education for staff and patients was at diploma level (Mean=4.02) and (Mean=3.93) respectively. For the period taken to receive essential medicines, the results revealed that it took 1-2 months for the health centres/hospitals to receive essential medicines (Mean=3.00). Findings about the number of employees working in the organization, the Manufacturers & National Medical Stores revealed that there were over 50 employees in their organizations (Mean=3.17) whereas for the health centres/hospitals, 31-50 staff were employed at the health centres/hospitals (Mean=3.56). For the patients attended to daily, the health centres/hospitals revealed that 31-50patients were attended to daily (Mean=3.41) and this was the same for the Manufacturers & National Medical Stores they (Mean=2.73). For the findings about period of existence of organization, the all the respondents in their different categories revealed that their organizations had been in existence for a period of 10-25 years. Table 4.2: Means for Health Centres/Hospitals’ Responses on Study Variables VariableMinMaxMeanStd. DeviationGovernance Structures153.710.32Ethical Behaviour153.300.31Transaction Costs153.110.66Supply Chain Performance153.690.62 Global means for health centres/hospitals responses on the different variables were generated and for governance structures, the health workers agreed to the existence of governance structures at the health centres/hospitals (Mean=3.71). For ethical behaviour, the health centres/hospitals were uncertain as to whether or not there was ethical conduct at the centres/hospitals (Mean=3.30) and this was the same for transacti...
Sample 1

Related to Sample Characteristics

  • Case characteristics means demographic or other objective characteristics of a small

  • Obligation Characteristics means any one or more of Not Subordinated, Specified Currency, Not Sovereign Lender, Not Domestic Currency, Not Domestic Law, Listed and Not Domestic Issuance, and:

  • Sample means urine, blood, breath, saliva, or hair.

  • Components means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

  • Target Population means persons with low incomes who have one or more disabilities, including mental illness, HIV or AIDS, substance abuse, or other chronic health condition, or individuals eligible for services provided pursuant to the Lanterman Developmental Disabilities Services Act (Division 4.5 (commencing with Section 4500) of the Welfare and Institutions Code) and may include, among other populations, adults, emancipated minors, families with children, elderly persons, young adults aging out of the foster care system, individuals exiting from institutional settings, veterans, and homeless people.

  • Bearing components means the bearing element, retainer, inner race, or outer race.

  • Indicator means a quantitative or qualitative factor or variable that contributes to better understanding progress in implementing;

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

  • Disinfection profile means a summary of Giardia lamblia inactivation through the treatment plant.

  • Category 4 Data is data that is confidential and requires special handling due to statutes or regulations that require especially strict protection of the data and from which especially serious consequences may arise in the event of any compromise of such data. Data classified as Category 4 includes but is not limited to data protected by: the Health Insurance Portability and Accountability Act (HIPAA), Pub. L. 104-191 as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), 45 CFR Parts 160 and 164; the Family Educational Rights and Privacy Act (FERPA), 20 U.S.C. §1232g; 34 CFR Part 99; Internal Revenue Service Publication 1075 (xxxxx://xxx.xxx.xxx/pub/irs-pdf/p1075.pdf); Substance Abuse and Mental Health Services Administration regulations on Confidentiality of Alcohol and Drug Abuse Patient Records, 42 CFR Part 2; and/or Criminal Justice Information Services, 28 CFR Part 20.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Filter profile means a graphical representation of individual filter performance, based on continuous turbidity measurements or total particle counts versus time for an entire filter run, from startup to backwash inclusively, that includes an assessment of filter performance while another filter is being backwashed.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Matrix (1 2 8 9) means a substantially continuous phase that fills the space between particles, whiskers or fibres.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • functionality means the ability of a tenderer to provide goods or services in accordance with specifications as set out in the tender documents.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Batch means a specific quantity of Product that is intended to have uniform character and quality, within specified limits, and is produced according to a single manufacturing order during the same cycle of manufacture.

  • Component System means, as of its relevant License Effective Date, each Listed System and each Support Function that is part of the Licensed System and, subsequent to a relevant License Effective Date, such Listed Systems and Support Functions as they may be changed as provided in subsection (b) of the definition of Licensed System.

  • Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:

  • Samples mean representative physical examples of materials, equipment or workmanship, used to confirm compliance with requirements and/or to establish standards for use in execution of the Work.

  • Outputs means the goods or services that are produced by an entity or other person;