Reliability Principles and Standards definition

Reliability Principles and Standards means the principles and standards established by NERC or an Applicable Regional Entity to define, among other things, an acceptable probability of loss of load due to inadequate generation or transmission capability, as amended from time to time.
Sample 1Sample 2Sample 3
Reliability Principles and Standards means the principles and standards established by the Office of the Interconnection that define, among other things, an acceptable probabilistic of loss of load criteria due to inadequate generation or transmission capability, as amended from time to time.
Sample 1

Examples of Reliability Principles and Standards in a sentence

  • Peak load carrying capability is defined to be the peak load that the PJM Region is able to serve at the loss of load expectation defined in the Reliability Principles and Standards.

  • The Office of the Interconnection shall determine Variable Resource Requirement Curves for the PJM Region and for such Locational Deliverability Areas as determined appropriate in accordance with subsection (a)(iii) for such Delivery Year to establish the level of Capacity Resources that will provide an acceptable level of reliability consistent with the Reliability Principles and Standards.

  • PJM Compliance with MAAC Reliability Principles and Standards • Single ContingencyThe system must be able to withstand the loss of any single transmission line, generating unit, transformer, bus, circuit breaker, or single pole of a bipolar DC line in addition to normal scheduled outages of bulk electric supply system facilities without exceeding the applicable emergency rating of any facility or appli- cable voltage criteria.

  • This Agreement is intended to ensure that adequate Capacity Resources, including planned and Existing Generation Capacity Resources, planned and existing Demand Resources, and Energy Efficiency Resources will be planned and made available to provide reliable service to loads within the PJM Region, to assist other Parties during Emergencies and to coordinate planning of such resources consistent with the Reliability Principles and Standards.

  • An LDA not otherwise qualifying under the above three tests may also be modeled if PJM finds that such LDA is determined to be likely to have a Locational Price Adder based on historic offer price levels or if such LDA is required to achieve an acceptable level of reliability consistent with the Reliability Principles and Standards.

  • Duty leave may be combined with earned leave, half pay leave or extraordinary leave.

  • Each Party shall cooperate with the other Parties in the coordinated planning and operation of their owned or contracted for Capacity Resources to obtain a degree of reliability consistent with the Reliability Principles and Standards.

  • Toward that end, it has adopted the NERC Reliability Standards and has established detailed Reliability Principles and Standards for Planning the Bulk Electric Supply System for SERC.

  • Toward that end, it has adopted the NERC Reliability Standards and has established detailed Reliability Principles and Standards for Planning the Bulk Electric Supply System of the ReliabilityFirst Corporation.

  • PJM-RTOThe annual PJM Reserve Requirement Study (RRS) calculates the reserve margin that is required to comply with the Reliability Principles and Standards as defined in the PJM Reliability Assurance Agreement (RAA) and ReliabilityFirst Corporation (RFC) in compliance with Standard BAL-502-RFC-02.

Related to Reliability Principles and Standards

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Reliability means the degree of performance of the bulk electric system that results in electricity being delivered within Reliability Standards and in the amount desired. Electric system Reliability can be addressed by considering two basic and functional aspects of electric systems, which are Adequacy and Security.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Information Privacy Principles means the information privacy principles set out in the PDP Act.

  • the data protection principles means the principles set out in Part I of Schedule 1 to that Act, as read subject to Part II of that Schedule and to section 27(1) of that Act;

  • Reliability Coordinator Area means that portion of the Bulk Electric System under the purview of the Reliability Coordinator.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Good Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the North American electric utility industry during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result consistent with good business practices, reliability, safety and expedition. Good Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather to be acceptable practices, methods, or acts generally accepted by NERC.

  • Reliability pricing model or "RPM" means PJM's capacity-

  • Operational Manual means the manual referred to in Section 3.03 of this Agreement;

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Privacy Shield Principles means the Privacy Shield Principles (as supplemented by the Supplemental Principles) contained in Annex II to the European Commission Decision C(2016)4176 of 12 July 2016 (as may be amended, superseded or replaced).

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.