Reagent Injection definition

Reagent Injection or "RI" means an H2SO4 control system consisting of the injection of a reagent in the flue gas stream to react with the acid gases and reduce the outlet H2SO4 Emissions Rate.
Sample 1Sample 2Sample 3
Reagent Injection or "RI" means an H2 SO4 control system consisting of the injection of a reagent in the flue gas stream to react with the acid gases and reduce the outlet H2 SO4 Emissions Rate.
Sample 1

Examples of Reagent Injection in a sentence

  • The Source plans to install a Reagent Injection System on Unit 15 by 2016.

  • This document is not intended to override or replace procedures for specific actions, but rather acts as a general guideline to the larger understanding of interoperable communications and to encourage the migration to standardized processes.

  • Where Dynegy Zimmer has selected Option 2 (Sulfuric Acid Stack Test and reagent injection) as set forth in Paragraph17.b above, during malfunction of the Sulfuric Acid Mitigation System that prevents reagent injection at rates and, if liquid reagent is used, concentration, consistent with the applicable Reagent Injection Compliance Curve, Dynegy Zimmer shall use either Option 1 or Option 3 as set forth in Paragraphs 17.a and c above as its compliance demonstration option.

  • Such compensation shall be equally shared come from the by the medical staff and administration, which could be used for clinical FTE back fill by contractual approval.

  • As of April 1, 2019, Appendix B sets forth the Reagent Injection Compliance Curve for the Final Sulfuric Acid Emission Rate in Paragraph 14 above based on reagent injection rates for solid reagents.

  • Dynegy Zimmer may not use liquid reagent unless it has submitted for EPA comment, a Reagent Injection Compliance Curve that sets forth the reagent injection rate and concentration for the liquid reagent.

  • The Appellant must make at least a plausible case that the facts relied on by him and the rights which he seeks to enforce exist and that the material conditions for a legal action are fulfilled (CAS 2000/274, published in the Digest of CAS Awards II, p.

  • Calyon 88,500.75 GBP Consorzio o/seas Bechtel/Technip It Khursaniyah Gas Plant Project, Rom General Signal UK Ltd.

  • Any revised Appendix B shall reflect the Reagent Injection Compliance Curve for the Final Sulfuric Acid Emission Rate in Paragraph 14 above based on the Sulfuric Acid Stack Test, and prior stack tests as appropriate.

  • Dynegy Zimmer may exceed the Final Sulfuric Acid Emissions Rate set forth in Paragraph 14 above during the following events: (1) limited and infrequent testing of an alternative sulfuric acid mitigation system reagent approved by EPA; and (2) limited and infrequent periods of a Sulfuric Acid Stack Test when determining Reagent Injection Compliance Curves in accordance with Paragraph 30 below.

Related to Reagent Injection

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • Semisolid means a product that, at room temperature, will not pour, but will spread or deform easily, including but not limited to gels, pastes, and greases.

  • Underground injection means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • Reagent means any product other than fuel that is stored on-board the vehicle and is provided to the exhaust after-treatment system upon request of the emission control system.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Polystyrene foam means blown polystyrene and expanded and

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Epinephrine auto-injector means a device for immediate self-administration or administration by another trained person of a measured dose of epinephrine to a person at risk of anaphylaxis.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Injection Point means the Electric Interconnection Point.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Feedstock means a solid waste that will readily decompose during the composting process including but not limited to yard waste, agricultural waste, animal waste, food scraps, animal carcasses, raw rendering material, and mixed solid waste.

  • Chemical substance means a substance intended to be used as a precursor in the manufacture of a controlled substance or any other chemical intended to be used in the manufacture of a controlled substance. Intent under this subsection may be demonstrated by the substance's use, quantity, manner of storage, or proximity to other precursors or to manufacturing equipment.

  • Bulk drug substance means any substance that is represented for use, and that, when used in the

  • Transportation district and "district" shall mean the

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Gasoline dispensing facility means any site where gasoline is dispensed to motor vehicle gasoline tanks from stationary storage tanks.

  • Transportation project means any project that the department is authorized by law to undertake including but not limited to a highway, tollway, bridge, mass transit, intelligent transportation system, traffic management, traveler information services, or any other project for transportation purposes.

  • Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.

  • Inert ingredient means an ingredient which is not an active ingredient.