Railway Industry Standards definition

Railway Industry Standards means as the context requires the applicable published rules and regulations including safety protocols and codes of practice and conduct in force from time to time relating to any equipment or activity or service to be provided under or used in connection with the Agreement.
Sample 1Sample 2Sample 3
Railway Industry Standards has the meaning given to it in paragraph 10.1 of Schedule 16 (Information and Industry Initiatives);
Sample 1Sample 2
Railway Industry Standards means Railway Industry Standards produced pursuant to the Railway Group Standards Code (or equivalent predecessor documents, including previous versions of the Railway Group Standards Code) defining mandatory requirements in respect of the mainline railway in each case as published by the Rail Safety and Standards Board Limited or imposed by the Office of Rail and Road. Such standards can be accessed on the website xxx.xxxxxxxxx.xx.xx; Railway means the Network and the provision of railway services as defined in section 82 of the Act in connection with the Network; Railway Interoperability Regulations means The Railways (Interoperability) Regulations 2011 (as amended); Regulated Change means Network Change and / or Station Change and / or Depot Change to the extent that each is required in connection with the Works; Safety Critical Event means risk to the health and safety of any individual or risk of damage or destruction to any property, or any incident which may reduce the safety integrity levels of any item of infrastructure; Specific Change in Law means any Change in Law which applies expressly to:
Sample 1

Examples of Railway Industry Standards in a sentence

  • The plaintiff’s were seeking unspecified damages for alleged violations of several state specific statutes, including the Motor Vehicle Time Sales Act; the Merchandising Practices Act; the Legal Tender and Interest Act; Article Nine of the Uniform Commercial Code; and Holder Liability.

  • Provide the Services with reasonable skill and care in accordance with the applicable Railway Industry Standards.

  • The stations at Ashley Down, North Filton and Henbury West would be on the sites of closed stations and as such, might have some so-called ‘grandfather’ rights, which could help secure derogations from the Railway Industry Standards.

  • Rail Delivery Group (RDG) Approved Code of Practice RDGACOP011 'Joint Industry Provision of Humanitarian Response Following a Major Passenger Rail Incident'• NR National Emergency Plan• RSSB - RIS-3119-TOM Railway Industry Standards for Accident and Incident Investigation• JESIP Joint Emergency Services Interoperability PrinciplesA full list of relevant standards and guidance are provided at Appendix F.

  • Stakeholders have told us they would like more clarity about the status of Railway Industry Standards, in particular some clear requirements to consult and adopt equally effective measures when deviating from them.

  • The supplier shall provide evidence that demonstrates arrangements are in place that ensures workers under its control meet and maintain the health requirements as specified in customer / client standards (e.g. NWR or TfL) and Railway Industry Standards.

  • Revise the requirements and guidance for design, testing and use The output of the brake performance testing, design risk analysis andconsideration of end user requirements has informed the revisions to the RSSB Railway Industry Standards for Trolleys (RIS-1530-PLT and RIS-1701-PLT) as an asset and the specifications for new Trolleys and Ironmen.

  • Therefore, the (total) initial on-hand inventory for product P was continuouslyupdated and estimated at xP weeks in the selling season.

  • The Loram UK Head of Engineering or Head of Operations will provide information to Loram UK Operations Control for onward transmission and liaison directly with the Network Rail National Control Centre for the urgent communication of significant defects to rolling stock or significant operational irregularities in line with Railway Industry Standards RIS-8250-RST Reporting High Risk Defects and RIS-3350-TOM Communication of Urgent Operating Advices.


More Definitions of Railway Industry Standards

Railway Industry Standards. Means, as the context requires the applicable published rules and regulations including codes of practice and conduct in force from time to time relating to any equipment or activity or service to be provided under or used in connection with the Contract.
Sample 1

Related to Railway Industry Standards

  • Petroleum Industry Standards means the Definitions for Oil and Gas Reserves promulgated by the Society of Petroleum Engineers (or any generally recognized successor) as in effect at the time in question.

  • Industry Standards means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Availability Standards has the meaning set forth in the CAISO Tariff.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Renewable Energy Standard means the minimum renewable energy capacity portfolio, if applicable, and the renewable energy credit portfolio required to be achieved under section 28 or former section 27.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Prudent Industry Practice means such practices, methods, acts, techniques, and standards as are in effect at the time in question that are consistent with (a) the standards generally followed by the United States pipeline and terminalling industries or (b) such higher standards as may be applied or followed by the Xxxxx Entities in the performance of similar tasks or projects, or by the Partnership Entities in the performance of similar tasks or projects.

  • Prudent Industry Practices means, at a particular time, any of the practices, methods and acts which, in the exercise of reasonable judgment, will result in the proper operation and maintenance of the assets owned by a Party or its Affiliates and shall include, without limitation, the practices, methods and acts engaged in or approved by a significant portion of the industry at such time with respect to the assets of the same or similar types as the assets owned by such Party or its Affiliates. Prudent Industry Practices are not intended to be limited to optimum practices, methods or acts, to the exclusion of all others, but rather represent a spectrum of possible practices, methods and acts which could have been expected to accomplish the desired result at a commercially reasonable cost in a reliable, safe and timely fashion, in compliance with the applicable limited partnership agreement and limited liability company agreement and in accordance with all applicable laws. Prudent Industry Practices are intended to entail the same standards as the Parties would, in the prudent management of their own properties, use from time to time.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Industry Code means a code approved or determined by ICRC under Part 4 of the Act;

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Best Industry Practice means that degree of skill, care and foresight and operating practice that would reasonably and ordinarily be expected of a skilled and competent supplier of services engaged in the same type of undertaking as that of the Recipient or any contractors (as applicable) under the same or similar circumstances as those contemplated by this Agreement.

  • Buffer Zone means an area designated to be left along roads or other features in which there will be no cutting.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • NERC means the North American Electric Reliability Corporation.

  • Safety Management System has the meaning given to it in the ISM Code.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.