PV Module definition

PV Module means each solar photovoltaic module incorporated into the Project.
Sample 1Sample 2Sample 3
PV Module means a photovoltaic electricity-generating panel using any variety of silicon and deposited metals with peak electricity production of less than five hundred seventy-five (575) watts and dimensions with a maximum limit of two hundred fifty centxxxxxrs (250 cm) by one hundred fifty centimeters (150 cm).
Sample 1
PV Module means a solar photovoltaic panel or module designed to convert solar irradiance to electrical energy;
Sample 1

Examples of PV Module in a sentence

  • PV Module QualificationThe PV modules used in the grid connected solar power Projects must qualify to the latest edition of any of the following IEC PV module qualification test or equivalent BIS standards.Crystalline Silicon Solar Cell Modules IEC 61215 Thin Film Modules IEC 61646Concentrator PV modules IEC 62108In addition, PV modules must qualify to IEC 61730 for safety qualification testing @1000 V DC or higher.

  • Minimum distance between the lower level of PV Module and the ground shall be 0.6m from the ground level.

  • The cost of such rectification, repair or replacement shall be encashed from the Bank Guarantee against PV Module Warranty.

  • Sizes and specification of cables for PV Module interconnections, PV Array to Array Junction Boxes, Array Junction Boxes to Inverter, Inverter to ACDB/ Grid Connection point etc.

  • In the event SunPower elects to replace any PV Module, SunPower will replace such PV Module with an electrically and mechanically compatible PV Module (including a refurbished or remanufactured PV Module) with a substantially equal or greater power rating.

  • The Financial bid is not to be mentioned anywhere other than the Electronic Form and only the financial bid mentioned in the Electronic form will be considered for further evaluationAuthorized Signatory Name: DesignationName of the Firm/Consortium Address Annexure – A: Technical Parameter of PV Module and various other components for use in Grid Connected Solar Power Plants All components of the PV plant shall be in accordance with technical specifications given in relevant IS/IEC Standards.

  • The Back sheets for PV Module with 2 layered or 3 layered Polyester types or the back sheets with Polyester (PET type) at Air side material are not permitted for the empanelment; The minimum thickness of the core layers (without adhesive and inner EVA coated) must be 300 microns.

  • If any PV Module fails to conform to this Limited Warranty and provided that any loss in power is determined by SunPower (in its sole discretion) not to have resulted from one of the excluded events set forth in Section 4 below, then for the Warranty Period, SunPower will repair, replace or refund the defective PV Modules as set forth herein.

  • The cost of such rectificaiton, repair or replacement shall be encashed from the Bank Guarantee against PV Module Warranty.

  • The opposite approach seems motivated by an overrated concern that arbitration provides a means for the elusion of anti-trust law and by the belief that ordinary mechanisms for the control of arbitral awards are unable to tackle the possible risks.

Related to PV Module

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • licensed water supplier means a company which is the holder for the time being of a water supply licence under Section 17A(1) of the 1991 Act(f);

  • Non-Microsoft Product means any third-party-branded software, data, service, website or product, unless incorporated by Microsoft in a Product.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Manufacturing Site means a location where a manufacturing

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Tobacco product manufacturer means an entity that after the date of enactment of this Act directly (and not exclusively through any affiliate):

  • Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.

  • Manufacturer means the person or body who is responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stage of the construction of the vehicle, system, component or separate technical unit which is the subject of the approval process.

  • Manufacturing Process means any process for—

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • Contract Manufacturer means a company that produces goods under contract for another company under the label or brand name of that company.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Modules means the Base Modules and Extended Modules.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • API means American Petroleum Institute.

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Software Upgrade means a release of Software, in object code form, or firmware, which adds new functionality and feature enhancements to the Software or Equipment.

  • Service Drop means the overhead service conductors from the service point to the connection to the service-entrance conductors at the building or other structure.

  • Supplier Software means software which is proprietary to the Supplier or its Affiliates which is used or supplied by the Supplier in the provision of the Services; Supplier Staff means all persons employed or engaged by the Supplier together with the Supplier's servants, agents, suppliers, consultants and Sub-Contractors (and all persons employed by any Sub-Contractor together with the Sub-Contractor’s servants, consultants, agents, suppliers and Sub-Contractors) used in the performance of its obligations under this Contract; Time and Materials means the pricing mechanism for the Services as may be agreed by the Parties and set out at paragraph Error: Reference source not found in the SOW; TUPE means the Transfer of Undertakings (Protection of Employment) Regulations 2006 (SI 2006/246) as amended or replaced or any other regulations or UK legislation implementing the Acquired Rights Directive; Velocity means the Metric which measures the total number of Story Points for Stories that have been accepted in a Sprint, indicating the rate of progress towards Acceptance of all Stories from the Product Backlog;

  • Product Manufacturer means the entity that assembles the component parts to manufacture the final Product;

  • Aerosol product means a pressurized spray system that dispenses product ingredients by means of a propellant contained in a product or a product's container, or by means of a mechanically induced force. “Aerosol Product” does not include “Pump Spray.”

  • Purchase Order means the form or format a Customer uses to make a purchase under the Contract (e.g., a formal written purchase order, electronic purchase order, procurement card, contract or other authorized means).