Project Safety Program definition

Project Safety Program means the Contractor’s site safety program that will govern project safety for its Work. The Project Safety Program must be submitted to CM by each successful Bidder before commencing Work and be no less stringent than Section 00810 - On Site Safety and Loss Control Program.
Sample 1Sample 2Sample 3
Project Safety Program means the Contractor’s site safety program that will govern project safety for its work. The Project Safety Program must be submitted to Barton Malow Builders by each successful Bidder before commencing work and be no less stringent than the Barton Malow Builders Safety Manual.
Sample 1Sample 2Sample 3
Project Safety Program shall be developed by Trade Contractor pursuant to this Agreement and Terms of Design and Construction.
Sample 1Sample 2Sample 3

Examples of Project Safety Program in a sentence

  • Shall comply with the Project Safety Program and all Federal, State and Local Codes and Regulations.

  • All Contractors, shall submit their Company’s Project Safety Program in writing to the Project Safety Representative prior to the start of their work.

  • As a minimum, the Contractor’s Safety Program shall incorporate all of the principles of Owner’s Project Safety Program.

  • Our Program complies with all Federal, State, and local Codes and Regulations and incorporates Owner’s Project Safety Program as minimum requirements.

  • Each Contractor is responsible for all his Contractors’ and Suppliers’ safety compliance, regardless of tier, with their Company’s Project Safety Program, and all Federal, State and Local Codes and Regulations.

  • Compliance Agreement After you have read Owner’s Project Safety Program, detach the bottom of this form and return to the Owner Project Representative.

  • Participation of subcontractors, suppliers and others in Project Safety Program.

  • The option to purchase two vehicle labels per single storey chalet unit, and four vehicle labels per double storey chalet unit in the chalet holders’ car park.

  • In addition to the requirements for safety defined in the Conditions of Contract and the Safety Plan, the Trade Contractor shall submit within two weeks of Notice to Proceed a detailed safety plan defining its intentions and procedures to be used on the project to comply with all requirements of OSHA and Project Safety Program, including work rules, fall protection, hoisting procedures, protection of other trades and finished materials, etc.

  • Each Subcontractor shall be solely responsible for any and all losses, damages, claims, liabilities, and suits arising out of such Subcontractor’s failure to enroll, or delay in enrolling, any of its Subcontractors.Unless otherwise directed by the Owner, Ineligible Contractors and Subcontractors will be required to maintain their own insurance for both on-site and off-site activities and will be required to participate in the Project Safety Program (See Section 1.16).


More Definitions of Project Safety Program

Project Safety Program. Means A safety program established at the Project Site initiated and supervised by the Owner’s Representative. “Project Safety Representative” Means As described in Part V.A, Section 2.9 “Project Schedule” Means The Owner’s schedule and milestones for the entire Project. “Project Site” Means As identified in Part I, Section 3.2. “Protest Work” Means As described in Part II, Section 5.5. “RAP” Means Remedial Action Plans. “RE” Means Resident Engineer. “RE’s Principal” Means The individual for whom the Owner has contracted to act as the principal representative of the Resident Engineer for the Project, as identified in Part I, Section 4.2.3. “Reporting Period” Means The one (1) month period commencing on the Commencement Date and each month thereafter during the term of the Contract, for which period the Construction Manager or Resident Engineer shall report to the Owner on the status of the Project. “Representatives” “Request for Information (RFI)” Means Means The employees, agents, servants, officers, directors, members, independent contractors and subcontractors of a person or entity. A request for additional information or clarification to be provided by the Contractor. Such request should be made within appropriate time to allow an answer to be provided by the Consultant before the work takes place. “Requisition” Means A request for payment, to be submitted to the Owner’s Accounts Payable Department by the Contractor not more than once per month, setting forth in detail, for the billing period for which partial payment is requested, the amount requested and Work performed during the billing period. “Resident Engineer” Means The entity or person contracted by the Owner to perform construction supervision services for the Project as identified in Part I, Section 4.2. “Retainage” Means Any sum withheld from any payment to the Contractor including, without limitation, any set percentage identified in Part I, Section 1.9, subject to the provisions of Part II, Article 4 and Part II, Article 11. “Retainage Payment Date” Means The date identified in Part I, Section 1.10, by which any Retainage identified in Part I, Section 1.9 will be paid to the Contractor, subject to the provisions of Part II, Article 4 and Part II, Article 11. “Samples” Means Physical examples which illustrate Materials and Equipment or workmanship and establish standards by which the Work will be judged, all as more specifically set forth in the Drawings and Design Specifications. “Schedule...
Sample 1Sample 2Sample 3
Project Safety Program shall be developed by Construction Manager pursuant to the Construction Services Agreement.
Sample 1
Project Safety Program. Means A safety program established at the Project Site initiated and supervised by the Owner’s Representative. “Project Safety Representative” Means As described in Part V.A, Section 2.9 “Project Schedule” Means The Owner’s schedule and milestones for the entire Project. “Project Site” Means As identified in Part I, Section 3.2. “Protest Work” Means As described in Part II, Section 5.5. “RAP” Means Remedial Action Plans. “RE” Means Resident Engineer. “RE’s Principal” Means The individual for whom the Owner has contracted to act as the principal representative of the Resident Engineer for the Project, as identified in Part I, Section 4.2.3. “Reporting Period” Means The one (1) month period commencing on the Commencement Date and each month thereafter during the term of the Contract, for which period the Construction Manager or Resident Engineer shall report to the Owner on the status of the Project. “Representatives” “Request for Information (RFI)” Means Means The employees, agents, servants, officers, directors, members, independent contractors and subcontractors of a person or entity. A request for additional information or clarification to be provided by the Contractor. Such request should be made within appropriate time to allow an answer to be provided by the Consultant before the work takes place.
Sample 1
Project Safety Program. Means A safety program established at the Project Site initiated
Sample 1

Related to Project Safety Program

  • Safety Plan means a written document that has procedures, requirements, or standards related to safety which the pool staff shall follow. The safety plan shall include training and emergency response procedures.

  • Development Plans has the meaning set forth in Section 3.2.

  • Procurement Plan means the Recipient’s procurement plan for the Project, dated April 2, 2010, and referred to in paragraph 1.16 of the Procurement Guidelines and paragraph 1.24 of the Consultant Guidelines, as the same shall be updated from time to time in accordance with the provisions of said paragraphs.

  • Project Management Plan means the management plan that (i) sets out a high level workplan to describe the manner in which the Design-Builder will manage the Project, including to address related matters such as traffic management and communications, and (ii) is prepared by or for the Design-Builder and submitted to the Owner;

  • Training program means a standardized medication

  • Project Implementation Manual or “PIM” means the manual setting out the measures required for the implementation of the Project, as the same may be amended from time to time, subject to prior approval of the Association;

  • Safety Management System has the meaning given to it in the ISM Code.

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Quality Assurance Program means the overall quality program and associated activities including the Department’s Quality Assurance, Design-Builder Quality Control, the Contract’s quality requirements for design and construction to assure compliance with Department Specifications and procedures.

  • Development Plan has the meaning set forth in Section 3.2.

  • Redevelopment Plan means the “Lincoln Center Redevelopment Plan” passed, adopted and approved by the City pursuant to the Resolution, and shall include any amendment of said Redevelopment Plan heretofore or hereafter made by the City pursuant to law.

  • Maintenance Program means a maintenance program for the Aircraft approved by the Aviation Authority, in conformity with the Maintenance Planning Document.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Maintenance Programme shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Stormwater management plan means the set of drawings and other documents that comprise all the information and specifications for the programs, drainage systems, structures, BMPs, concepts and techniques intended to maintain or restore quality and quantity of stormwater runoff to pre-development levels.

  • Database Management System (DBMS) A system of manual procedures and computer programs used to create, store and update the data required to provide Selective Routing and/or Automatic Location Identification for 911 systems. Day: A calendar day unless otherwise specified. Dedicated Transport: UNE transmission path between one of CenturyLink’s Wire Centers or switches and another of CenturyLink’s Wire Centers or switches within the same LATA and State that are dedicated to a particular customer or carrier. Default: A Party’s violation of any material term or condition of the Agreement, or refusal or failure in any material respect to properly perform its obligations under this Agreement, including the failure to make any undisputed payment when due. A Party shall also be deemed in Default upon such Party’s insolvency or the initiation of bankruptcy or receivership proceedings by or against the Party or the failure to obtain or maintain any certification(s) or authorization(s) from the Commission which are necessary or appropriate for a Party to exchange traffic or order any service, facility or arrangement under this Agreement, or notice from the Party that it has ceased doing business in this State or receipt of publicly available information that signifies the Party is no longer doing business in this State.

  • Stormwater management planning agency means a public body authorized by legislation to prepare stormwater management plans.

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Maintenance Supervisor (Tradesperson) means an employee who has trade qualifications and has overall responsibility for maintenance at the place of employment and may be required to supervise other maintenance staff.

  • Management Plan means a plan to manage the activities and protect the special value or values in an Antarctic Specially Protected Area or an Antarctic Specially Managed Area.

  • Waste Framework Directive or “WFD” means Waste Framework Directive 2008/98/EC of the European Parliament and of the Council on waste

  • Mobile crisis outreach team means a crisis intervention service for minors or families of minors experiencing behavioral health or psychiatric emergencies.

  • Commercial Development Plan means the written commercialization plan attached as Appendix E.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Marketing program means a program established by order of the director pursuant to this act prescribing rules and regulations governing the marketing for processing, distributing, selling, or handling an agricultural commodity produced in this state or agricultural commodity input during a specified period and