Process Residue definition

Process Residue means grit, screenings, water treatment residuals, and wastewater sludge and biosolids generated by or through the operation of the Facilities.
Sample 1
Process Residue means the residue produced at the Facility as a result of the Processing of Acceptable Waste and not beneficially re-used.
Sample 1
Process Residue is defined as grit, screenings, sludge, biosolids and other residue generated by or through the operation of the Facilities.
Sample 1

Examples of Process Residue in a sentence

  • Most work in this area explicitly targets the regression test selection [21], [22] and prioritization [15], [20] problems for traditional release-based software development.

  • Any material, which would result in Process Residue being Hazardous Waste under (1) or (2) above.

  • Inspect and certify composition of the Process Rejects/ Process Residue/ Inerts.

  • Residue Management‌ (a) Process Residue Handling and Storage Ash residues generated by facility operations shall be discharged into and stored in containers, as described in the documents listed in the "Approved Designs, Plans and Reports" condition of this section of the permit.

  • Summit participants emphasized that “information is as important as medicine,” and that “without good treatment education, we cannot effectively manage side effects or expect good adherence to therapy” (FCAA 2003:5).

  • Title and ownership of Process Residue shall remain with the Municipality notwithstanding such services by the Operator.

  • Item Description Code 241, Americium Process Residue: This waste consists of metal, glass, plastic, combustible, and other miscellaneous wastes.

  • To control this emissions wet scrubber is installed to existing boiler. Hazardous Waste - The quantity of hazardous waste generated in the form of Process Residue (cat.

  • The Company shall be responsible for removing from the Facility and transporting to the Landfill all Process Residue and, except as otherwise expressly provided herein, all County By-Pass Waste.

  • This provision shall apply as to non-ferrous recoverable materials even if the recovery of materials from the Process Residue is done at a location other than the Facility.


More Definitions of Process Residue

Process Residue means (i) recyclables and any and all sorted materials from the MSW, including, but not limited to glass, metals, plastics, etc., and (ii) any and all fertilizer based water byproduct and bottom ash resulting from the waste-to-energy process produced by the DTE Facility.
Sample 1
Process Residue means bottom ash, fly ash, grate siftings and other material derived from Acceptable Waste which remains after the combustion of Acceptable Waste.
Sample 1

Related to Process Residue

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • cannabis resin means the separated resin, whether crude or purified, obtained from any plant of the genus Cannabis;

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Production Period is the period that for winter cereal advances commences October 1, 2021 and terminates September 30, 2023; for advances on all other field crops, honey, hogs, goats, sheep and lambs commences April 1, 2022 and terminates September 30, 2023; and for advances on cattle, continuous flow cattle, and bison commences on April 1, 2022 and terminates on March 31, 2024.

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Added filtration means any filtration which is in addition to the inherent filtration.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • Feedstock means a solid waste that will readily decompose during the composting process including but not limited to yard waste, agricultural waste, animal waste, food scraps, animal carcasses, raw rendering material, and mixed solid waste.

  • Batch means a specific quantity of Product that is intended to have uniform character and quality, within specified limits, and is produced according to a single manufacturing order during the same cycle of manufacture.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Injection Point means the Electric Interconnection Point.

  • Cell Line means the cell line, particulars of which are set out in Schedule 1.

  • Improvement warranty period means a period:

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Extraction means a process by which cannabinoids are separated from cannabis plant material through chemical or physical means.

  • Biochemical Oxygen Demand (BOD) shall mean the quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five (5) days at 20 degrees Centigrade, expressed in milligrams per liter.

  • Bulk Product means Licensed Product supplied in a form other than Finished Product which can be converted into Finished Product.

  • Milk product or "dairy product" means cottage cheese, dry curd cottage cheese, reduced fat cottage cheese, lowfat cottage cheese, cream, light cream, light whipping cream, heavy cream, heavy whipping cream, whipped cream, whipped light cream, sour cream, acidified sour cream, cultured sour cream, half-and-half, sour half-and-half, acidified sour half-and-half, cultured sour half-and-half, reconstituted or recombined milk and milk products, concentrated milk, concentrated milk products, skim milk, lowfat milk, frozen milk concentrate, flavored milk, eggnog, buttermilk, cultured milk, cultured lowfat milk, cultured skim milk, yogurt, lowfat yogurt, nonfat yogurt, acidified milk, acidified lowfat milk, acidified skim milk, low-sodium milk, low-sodium lowfat milk, low-sodium skim milk, lactose-reduced milk, lactose-reduced lowfat milk, lactose-reduced skim milk, aseptically processed and packaged milk, milk products with added safe and suitable microbial organisms, and any other milk product made by the addition or subtraction of milkfat or addition of safe and suitable optional ingredients for protein, vitamin, or mineral fortification. Unless a product is considered a milk product under this subdivision, milk product does not include dietary products, infant formula, ice cream or other desserts, cheese, or butter. Milk products include the following:

  • Original component manufacturer means an organization that designs and/or engineers a part and is entitled to any intellectual property rights to that part.