Power transfer capability definition

Power transfer capability means the amount of power that can be transferred from one point or part of the bulk electric system to another without exceeding any reliability criteria pertinent to the utility.
Sample 1Sample 2Sample 3
Power transfer capability means the maximum permitted instantaneous rate at which active energy can be transferred through the network.
Sample 1
Power transfer capability means the amount of power that can be transferred from one power system to another without impairing the reliability criteria of the interconnected systems;32
Sample 1

Examples of Power transfer capability in a sentence

  • Once the Active Power output or, in the case of OTSDUW, Active Power transfer capability has been restored to the required level, Active Power oscillations shall be acceptable provided that: - the total Active Energy delivered during the period of the oscillations is at least that which would have been delivered if the Active Power was constant- the oscillations are adequately damped.

  • Expected results • Improved access to reliability of affordable electricity; • Power transfer capability of 3 550 MW; • Temporary jobs created:3 591 FTE; • Permanent jobs created: 100 FTE.

  • Power transfer capability of line compensation TS is primarily limited by stability, and the basic function of the reactive power equipment is to secure this.

  • ECC.6.3.15.9.1.1 The requirements applicable to HVDC Equipment including OTSDUW DC Converters subject to faults and voltage disturbances at the Grid Entry Point or User System Entry Point or Interface Point or HVDC Interface Point, including Active Power transfer capability shall be specified in the Bilateral Agreement.

  • Power transfer capability evaluation- This function is required to calculate the maximum transfer capability of power between areas.

  • The Respondent’s product does not currently satisfy the requirement, but the bidder commits that the delivered base product will satisfy the requirement at no additional cost and shall be supported in future releases of the Respondent’s base products.

  • Power transfer capability comparison of the conventional and proposed rotary transformer with and without compensation.TABLE II.

  • Comparison of Power Transfer Distance230V 3-ph (L-N) ACUni-Polar DC 700V Bi-polar DC 700V Bi-polar DC 375V500450400Power (kW)350300250200150100500Distribution Distance (m) Fig- 4: Power transfer capability of different distribution systems, while adhering to a 6% voltage drop on a 3-core, Aluminium XLPE 185mm2 cable.

  • In those instances where disciplinary action is initiated or recommended, (counseling, reprimand, etc.), do not include recommendations in the original Form 654.

  • Recall that 24 subjects choose to be honest by reporting B when the state is B, while they believed that it would be more profitable to lie and report A.

Related to Power transfer capability

  • Available Transfer Capability or “ATC” shall mean a measure of the transfer capability remaining in the physical transmission network for further commercial activity over and above already committed uses.

  • Total Transfer Capability or “TTC” shall mean the amount of electric power that can be moved or transferred reliably from one area to another area of the interconnected Transmission Systems by way of all transmission lines (or paths) between those areas under specified system conditions.

  • Signaling Transfer Point (“STP”) means a signaling point that performs message routing functions and provides information for the routing of messages between signaling points within or between CCIS networks. An STP transmits, receives and processes CCIS messages.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Interconnection Service Agreement means an agreement among the Transmission Provider, an Interconnection Customer and an Interconnected Transmission Owner regarding interconnection under Tariff, Part IV and Tariff, Part VI. List of Approved Contractors:

  • Capacity Interconnection Rights means the rights to input generation as a Generation Capacity Resource into the Transmission System at the Point of Interconnection where the generating facilities connect to the Transmission System.

  • Power System means all aspects of generation, transmission, distribution and supply of electricity and includes one or more of the following, namely:-

  • Interconnection Service means the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to the terms of Tariff, Part IV and Tariff, Part VI and the Interconnection Service Agreement entered into pursuant thereto by Interconnection Customer, the Interconnected Transmission Owner and Transmission Provider. Interconnection Service Agreement:

  • Surplus Interconnection Service means any unneeded portion of Interconnection Service established in an Interconnection Service Agreement, such that if Surplus Interconnection Service is utilized, the total amount of Interconnection Service at the Point of Interconnection would remain the same. Switching and Tagging Rules:

  • Interconnection Agreement means the interconnection agreement entered into by Seller pursuant to which the Facility will be interconnected with the Transmission System, and pursuant to which Seller’s Interconnection Facilities and any other Interconnection Facilities will be constructed, operated and maintained during the Contract Term.

  • Interconnection is As Defined in the Act.

  • Generation Interconnection Agreement means the generation interconnection agreement to be entered into separately between Seller and PGE, providing for the construction, operation, and maintenance of interconnection facilities required to accommodate deliveries of Seller's Net Output.

  • Interconnection Customer means a Generation Interconnection Customer and/or a Transmission Interconnection Customer.

  • Available Flowgate Capability or “AFC” shall mean the rating of the applicable Flowgate less the projected loading across the applicable Flowgate less TRM and CBM. The firm AFC is calculated with only the appropriate Firm Transmission Service reservations (or interchange schedules) in the model, including recognition of all roll-over Transmission Service rights. Non- firm AFC is determined with appropriate firm and non-firm reservations (or interchange schedules) modeled.

  • Surplus Interconnection Customer means either an Interconnection Customer whose Generating Facility is already interconnected to the PJM Transmission System or one of its affiliates, or an unaffiliated entity that submits a Surplus Interconnection Request to utilize Surplus Interconnection Service within the Transmission System in the PJM Region. A Surplus Interconnection Customer is not a New Service Customer.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Interconnector means equipment used to link the electricity system of the State to electricity systems outside of the State;