Pollution control devices definition

Pollution control devices means those components of a vehicle that control and/or limit exhaust and evaporative emissions.
Pollution control devices means those components of a vehicle that control and/or limit exhaust and evaporative emissions. 2.13 "On-Board Diagnostic (OBD)" means an on-board diagnostic system for emission control, which has the capability of identifying the likely area of malfunction by means of fault codes stored in computer memory. 2.14 “In-service test” means the test and evaluation of conformity conducted in accordance with Chapter 18 of this Part. 2.15 "Properly maintained and used" means, for the purpose of a test vehicle, that such a vehicle satisfies the criteria for acceptance of a selected vehicle laid down in clause 2 of Appendix 1 of Chapter 18 of this Part. 2.16 "Defeat device" means any element of design which senses temperature, vehicle speed, engine rotational speed, transmission gear, manifold vacuum or any other parameter for the purpose of activating, modulating, delaying or deactivating the operation of any part of the emission control system, that reduces the effectiveness of the emission control system under conditions which may reasonably be expected to be encountered in normal vehicle operation and use. Such an element of design may not be considered a defeat device if: 2.16.1 The need for the device is justified in terms of protecting the engine against damage or accident and for safe operation of the vehicle; or 2.16.2 The device does not function beyond the requirements of engine starting; or 2.16.3 Conditions are substantially included in the test procedures for verifying evaporative emissions and tailpipe emissions. 2.17 "Family of vehicles" means a group of vehicle types identified by a parent vehicle for the purpose of Chapter 13 of this Part. 2.18 "Bio-fuel" means liquid or gaseous fuel for transport, produced from biomass. 2.19 "Approval of a vehicle" means the approval of a vehicle type with regard to the limitation of the following conditions: 2.19.1 Limitation of tailpipe emissions by the vehicle, evaporative emissions, crankcase emissions, durability of pollution control devices, Real Driving Emission (RDE), measurement of fuel consumption, engine power and on-board diagnostics of vehicles fueled with unleaded gasoline, or which can be fuelled with either unleaded gasoline and LPG or NG/biomethane or Hydrogen or biofuels and Ethanol E85 or E100. 2.19.2 Limitation of tailpipe emissions, durability of pollution control devices, Real Driving Emission (RDE), measurement of fuel consumption, engine power and on-board diagnostics of vehiclesfueled wit...

Examples of Pollution control devices in a sentence

  • Pollution control devices associated with each piece of dry cleaning equipment shall be operated whenever the equipment served by that control device is in operation.

  • Pollution control devices such as cyclone separators /scrubbers will be installed to control emissions from hot mix plants, crushing units and concrete batching plants.

  • On-line stake monitoring facilities for all the stacks and sufficient air Pollution control devices shall be provided.

  • Pollution control devices acquired, constructed or installed by contractors shall not be considered as improvements on the land or building where they are placed, and shall not be subject to real property and other taxes or assessments: Provided, however, That payment of mine wastes and tailings fees is not exempted.

  • Pollution control devices shall be in operation at all times when the associated emission unit(s) is in operation and emitting air contaminants.

  • Pollution control devices have been installed to control effluents generated.4.4.5 BOROSIL The company is striving to ensure:• Pollution control in the manufacturing and other units;• Safe working conditions to all employees.

  • Pollution control devices have been installed to control effluents generated.

  • Pollution control devices in modern power plants usually capture about 99 percent of fly ash, and devices in some older plants capture about 90 percent.

  • Pollution control devices (if not covered by another heading) 3.2.12.2.1. Catalytic converter M1 3.2.12.2.1.1. Number of catalytic converters and elements (provide the information below for each separate unit): … .

  • The above mentioned Indian regulatory text for assessing the durability of Pollution control devices for 2-Wheelers and 3-Wheeler vehicles are detailed in the following linked documents.

Related to Pollution control devices

  • Pollution control facilities means water and air pollution control equipment and solid waste disposal facilities or any of them.

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Pollution control project means any activity or project at an existing electric utility steam generating unit for purposes of reducing emissions from such unit. Such activities or projects are limited to:

  • Pollution prevention means any activity that through process changes, product reformulation or redesign, or substitution of less polluting raw materials, eliminates or reduces the release of air pollutants (including fugitive emissions) and other pollutants to the environment prior to recycling, treatment, or disposal; it does not mean recycling (other than certain “in-process recycling” practices), energy recovery, treatment, or disposal.

  • Stormwater Pollution Prevention Plan or "SWPPP" means a document that is prepared in accordance with good engineering practices and that identifies potential sources of pollutants that may reasonably be expected to affect the quality of stormwater discharges from the construction site, and otherwise meets the requirements of this Ordinance. In addition the document shall identify and require the implementation of control measures, and shall include, but not be limited to the inclusion of, or the incorporation by reference of, an approved erosion and sediment control plan, an approved stormwater management plan, and a pollution prevention plan.

  • Solid waste management facility means the same as that term is defined in Section 19-6-502.

  • Solid Waste Disposal Site means, as defined in NCGS 130A-290(a)(36), any place at which solid wastes are disposed of by incineration, sanitary landfill, or any other method.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Waste prevention means source reduction and reuse, but not recycling.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Solid waste facility means a site, location, tract of land, installation, or building used for incineration, composting, sanitary landfilling, or other methods of disposal of solid wastes or, if the solid wastes consist of scrap tires, for collection, storage, or processing of the solid wastes; or for the transfer of solid wastes.

  • Air transportation means the public carriage by aircraft of passengers, baggage, cargo, and mail, separately or in combination, for remuneration or hire;

  • Solid waste management means the purposeful and systematic collection, transportation, storage, processing, recovery, or disposal of solid waste.

  • Waste Disposal Site means a Waste Disposal Site which is not a Hauled Sewage Disposal Site, a Sewage Works or a Waste Stabilization Pond; and

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Safety Management System has the meaning given to it in the ISM Code.

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Environmental, Health and Safety Laws means the Comprehensive Environmental Response, Compensation and Liability Act of 1980, the Resource Conservation and Recovery Act of 1976, and the Occupational Safety and Health Act of 1970, each as amended, together with all other laws (including rules, regulations, codes, plans, injunctions, judgments, orders, decrees, rulings, and charges thereunder) of federal, state, local, and foreign governments (and all agencies thereof) concerning pollution or protection of the environment, public health and safety, or employee health and safety, including laws relating to emissions, discharges, releases, or threatened releases of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes into ambient air, surface water, ground water, or lands or otherwise relating to the manufacture, processing, distribution, use, treatment, storage, disposal, transport, or handling of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes.

  • Emergency Medical Transportation means the transportation, by ambulance, of sick, injured or otherwise incapacitated persons who require emergency medical care.

  • Traffic control device means a flagger, sign, signal, marking, or other device used to regulate, warn or guide traffic, placed on, over, or adjacent to a street, highway, private road open to public travel, pedestrian facility, or shared-use path by authority of a public agency or official having jurisdiction, or, in the case of a private road open to public travel, by authority of the private owner or private official having jurisdiction.

  • Natural environment means the air, land and water, or any combination or part thereof, of the Province of Ontario; (“environnement naturel”)

  • Solid Waste Disposal Facility means any facility involved in the disposal of solid waste, as defined in NCGS 130A-290(a)(35).

  • Remediation waste management site means a facility where an owner or operator is or will be treating, storing or disposing of hazardous remediation wastes. A remediation waste management site is not a facility that is subject to corrective action under § 264.101 of this regulation, but is subject to corrective action requirements if the site is located in such a facility.

  • Nuclear pharmacy means a pharmacy providing radio-pharmaceutical service.

  • Ocean transportation means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.

  • Environmental Management System means an environmental management system or plan of management to address all environmental risks and to ensure compliance with all Environmental Laws and licences;