Peak power definition

Peak power. (6) means the highest power attained in the "pulse duration".

Peak power means the power supplied from the Project during Peak Hours;

Peak power. (6), means the highest level of power attained in the “laser duration”.

Examples of Peak power in a sentence

• This “Limited Product Warranty” does not warrant a specific power output, which shall be exclusively covered under clause 2 hereinafter (“Limited Peak Power Warranty”).

• For any refund, SunPower may either refund the original purchase price, or refund the amount equal to the original purchase price multiplied by the difference between the Guaranteed Peak Power percentage and the actual power output percentage; provided, however, the original purchase price shall be prorated at 4.75% per year starting five years after the Warranty Start Date.

• In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)–as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed  For Polycrystalline Products (as defined in Sec.

• All claims under the Limited Product Warranty must be submitted in writing to JA Solar within the Limited Product Warranty Period, while all claims under the Limited Peak Power Warranty must be submitted in writing to JA Solar within the Limited Peak Power Warranty Period.

• The Remedy under the Limited Product Warranty and the Remedy under the Limited Peak Power Warranty as set forth above are the sole and exclusive responsibility and obligation of JA Solar to Customer under this Limited Warranty, and are also the sole and exclusive remedy of Customer for the Claim Modules under this Limited Warranty.

More Definitions of Peak power

Peak power is the power in peak xxxxx that a PV module generates at STC (Standard Test conditions: Irradiance of 1000 W/m2, light spectrum AM 1.5g and a cell temperature of 25 degrees C)

Peak power means the power supplied from the Project during Peak

Peak power is the power in watt peak that a PV module generates in its maximum power point. 'STC’ are as follows:

Peak power is the power in watt peak that a PV-module generates in its maximum power point. SUNMAN measurements are as follows (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W per m2 and (c) a cell temperature of 25 degree Centigrade. The measurements are carried out in accordance with IEC61215 as tested at the junction box terminals per the calibration and testing standards of SUNMAN valid at the date of manufacture of the PV-Modules. SUNMAN’s calibration standards shall be in compliance with the standards applied by international institutions accredited for this purpose. Sunman (Hong Kong) Limited Add: Room 1401, 14/F., World Commerce Centre, Harbour City, 0-00 Xxxxxx Xxxx, Xxxxxxxxxxx, Xxxxxxx, Xxxx Xxxx. Tel.: +00 000 000 0000 Fax: +00-00-00000000

Peak power means the power contained within a 50 MHz bandwidth at the frequency at which the highest mean radiated power occurs, radiated in the direction of the maximum level under the specified conditions of measurement and which is specified as e.i.r.p.;

Peak power is the power in Watt peak that a PV-module generates in its maximum power point under STC condition. ‘STC’ are as follows: (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W/m2 and (c) a cell temperature of 25 degree Centigrade at right angle irradiation. The measurements are carried out in accordance with IEC61215 as tested at the junction box terminals per the calibration and testing standards of Perlight valid at the date of manufacture of the PV-Modules. Perlight’s calibration standards shall be in compliance with the standards applied by international institutions accredited for this purpose. Perlight Solar Co., Ltd. (Stamp) Add: Oufeng Road, Muyu Administration District, Wenling, Zhejiang, 317521,China Tel: 0000-000-00000000 Fax:0000-000-00000000

Peak power is the power in watt peak that a PV-module generates in its maximum power point. Jinko Solar measurements are as follows (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W perm2 and (c) a cell temperature of 25 degree Centigrade. The measurements are carried out in accordance with IEC61215 as tested at the junction box terminals per the calibration and testing standards of Jinko valid at the date of manufacture of the PV-Modules. Jinko’s calibration standards shall be in compliance with the standards applied by international institutions accredited for this purpose. Jinko Solar