Outside Diameter definition

Outside Diameter also referred to as “OD” means the points of measurement, using the outer edges of a pole, pipe or cylinder.
Outside Diameter or “OD” means the points of measurement, using the outer edges of a pole, pipe or cylinder.

Examples of Outside Diameter in a sentence

  • Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter.

  • STANDARDS AND CODE COMPLIANCE BIS 157778 : 2007 ASTM D 2846/F493TECHNICAL DETAILS Outside Diameter and Wall Thickness for CPVC 4120, SDR II & SDR 13.5 Plastic Pipe.

  • Over 10 inch Outside Diameter of Insulation or Pipe: 32 inch long color field, 3-1/2 inch high letters.

  • Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter.

  • Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter.

  • Table 3 – Dent CriteriaDent typeCritical Dents that Require ActionECA an Option Plain DentDent of depth > 6% Outside Diameter (OD) or dent strain level exceeding:i.

  • One particular area of interest is the integration of the management (antenna pointing) communication protocol of these terminals with the SKYWAN 5G NetConf world.The specification for the extension was done with own funding before; the implementation of the specified functionality along with the integration testing is part of this ESA project.

  • Dimension Ratio (DR) and Outside Diameter (IPS/DIPS) shall be as specified on plans.

  • Up to 2 inches Outside Diameter of Insulation or Pipe: 1/2 inch high letters.

  • See the table below to view the list of possible values: Outside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FTOutside Diameter InchesNominal Weight LB/FT 2.3 CATEGORY This refers to the categories of information.

Related to Outside Diameter

  • Outside Directors means members of the Board who are not officers of the Company or any of its Subsidiaries and who are not Acquiring Persons or representatives, nominees, Affiliates or Associates of Acquiring Persons.

  • Outside Director means a Director who is not an Employee.

  • Section 162(m means Section 162(m) of the Code.

  • Section 162(m) of the Code means the exception for performance-based compensation under Section 162(m) of the Code and any applicable treasury regulations thereunder.

  • Section 162(m) Award means a Performance Award granted under Section 6(k)(i) to a Covered Employee that is intended to satisfy the requirements for “performance-based compensation” within the meaning of Section 162(m).

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Short-barreled shotgun means a shotgun having one or more barrels less than eighteen inches in length and any weapon made from a shotgun by any means of modification if such modified weapon has an overall length of less than twenty-six inches.

  • Short-Term Resource Procurement Target means, for Delivery Years through May 31, 2018, as to the PJM Region, for purposes of the Base Residual Auction, 2.5% of the PJM Region Reliability Requirement determined for such Base Residual Auction, for purposes of the First Incremental Auction, 2% of the of the PJM Region Reliability Requirement as calculated at the time of the Base Residual Auction; and, for purposes of the Second Incremental Auction, 1.5% of the of the PJM Region Reliability Requirement as calculated at the time of the Base Residual Auction; and, as to any Zone, an allocation of the PJM Region Short-Term Resource Procurement Target based on the Preliminary Zonal Forecast Peak Load, reduced by the amount of load served under the FRR Alternative. For any LDA, the LDA Short-Term Resource Procurement Target shall be the sum of the Short-Term Resource Procurement Targets of all Zones in the LDA.

  • Minimum Generation Emergency means an Emergency declared by the Office of the Interconnection in which the Office of the Interconnection anticipates requesting one or more generating resources to operate at or below Normal Minimum Generation, in order to manage, alleviate, or end the Emergency.

  • Dual status military technician means a federal civilian employee who is:

  • Short-Term Deferral Period means the period ending on the later of the 15th day of the third month following the end of the Executive’s tax year in which the separation from service occurs and the 15th day of the third month following the end of the Company’s tax year in which the separation from service occurs; and

  • Line-voltage regulation means the difference between the no-load and the load line potentials expressed as a percent of the load line potential. It is calculated using the following equation:

  • Hydraulic conductivity means the quantity of water that will flow through a unit cross-sectional area of a porous material per unit of time under a hydraulic gradient of 1.0;

  • Maximum Generation Emergency means an Emergency declared by the Office of the Interconnection to address either a generation or transmission emergency in which the Office of the Interconnection anticipates requesting one or more Generation Capacity Resources, or Non- Retail Behind The Meter Generation resources to operate at its maximum net or gross electrical power output, subject to the equipment stress limits for such Generation Capacity Resource or Non-Retail Behind The Meter resource in order to manage, alleviate, or end the Emergency.

  • ISO-NE means ISO New England Inc., the independent system operator established in accordance with the RTO arrangements for New England, or its successor.

  • Maximum Generation Emergency Alert means an alert issued by the Office of the Interconnection to notify PJM Members, Transmission Owners, resource owners and operators, customers, and regulators that a Maximum Generation Emergency may be declared, for any Operating Day in either, as applicable, the Day-ahead Energy Market or the Real-time Energy Market, for all or any part of such Operating Day. Maximum Run Time:

  • Section 409A means Section 409A of the Code and the regulations and other guidance promulgated thereunder.

  • Section 162(m) Participant means any key Employee designated by the Administrator as a key Employee whose compensation for the fiscal year in which the key Employee is so designated or a future fiscal year may be subject to the limit on deductible compensation imposed by Section 162(m) of the Code.

  • Inside Director means a Director who is an Employee.

  • Short-barreled rifle means a rifle having one or more barrels less than sixteen inches in length and any weapon made from a rifle by any means of modification if such modified weapon has an overall length of less than twenty-six inches.

  • B-BBEE status level of contributor means the B-BBEE status of an entity in terms of a code of good practice on black economic empowerment, issued in terms of section 9(1) of the Broad-Based Black Economic Empowerment Act;

  • Short-term acute care facility means a facility or Hospital that provides care to people with medical needs requiring short-term Hospital stay in an acute or critical setting such as for recovery following a surgery, care following sudden Sickness, Injury, or flare-up of a chronic Sickness.

  • Section 162(m) Exemption means the exemption from the limitation on deductibility imposed by Section 162(m) of the Code that is set forth in Section 162(m)(4)(C) of the Code.

  • ISO means an employee incentive stock option described in Section 422(b) of the Code.

  • Evaporative emissions means the hydrocarbon vapours lost from the fuel system of a motor vehicle other than those from exhaust emissions;

  • Section 409A of the Code means the nonqualified deferred compensation rules under Section 409A of the Code and any applicable treasury regulations and other official guidance thereunder.