Operations and Maintenance Work definition

Operations and Maintenance Work means all work related to the operation, testing, management, administration and maintenance of (i) the Premises; provided, that, the Lessee shall not be responsible for the operation, testing, management, administration and maintenance of(x) the access roadway identified as “Elevated Roadway Excluded from Delta O&M Responsibility” and shown in red vertical hatching on Exhibit 6 (Delta Leasehold) (page 2 of 2) or any paving, lighting, signage, storm drains, culverts, cables, supporting structures, cleaning and snow and ice removal in connection therewith, or (y) other than as specified in the following clause (iii), any Utilities upon the Premises that either (1) are not specifically identified as the Lessee’s responsibility on Exhibit 12 (Utility O&M Responsibilities) or (2) are specifically identified on such Exhibit 12 (Utility O&M Responsibilities) as the responsibility of the Port Authority or other non-Lessee party, (ii) the New Substation and related systems to the extent described as the Lessee’s responsibility on Exhibit 2 (O&M Responsibilities with respect to Certain Off-Premises Facilities) and (iii) (x) subject to clause (y) above, all Utilities located upon the Premises that exclusively serve the Premises and (y) certain Utilities upon the Premises and off the Premises as required by Section 16(c) and identified as the Lessee’s responsibility on Exhibit 12 (Utility O&M Responsibilities); including, in each of clauses (i), (ii) and (iii), any repair, modification, reconstruction, rehabilitation, restoration, renewal and replacement of each of the foregoing, all as required under this Agreement, but excluding the D&C Work. For the avoidance of doubt, except as expressly included in this definition of “Operations and Maintenance Work,” the Lessee shall not be responsible for performing Operations and Maintenance Work with respect to any Off- Premises Facilities whether or not any portion of such Off-Premises Facilities are located within the lease lines of the Premises. For further clarity, the Port Authority shall be responsible for performing, or causing to be performed, the operation, testing, management, administration and maintenance of the portions of the pedestrian bridge connecting the New Terminal Facilities to the East Garage described in Section 5(b)(2)(ii)(a), the unifying architectural connecting structure described in Section 5(b)(2)(ii)(c) and the New Substation and related systems, except to the extent described as the Lessee’s re...
Sample 1Sample 2
Operations and Maintenance Work means all work related to the operation, testing, management, administration and maintenance of (i) the Premises; provided , that, the Lessee shall not be responsible for the operation, testing, management, administration and maintenance of (x) the access roadway identified as “Elevated Roadway Excluded from Delta O&M Responsibility” and shown in red vertical hatching on Exhibit 6 ( Delta Leasehold ) (page 2 of 2) or any paving, lighting, signage, storm drains, culverts, cables, supporting structures, cleaning and snow and ice removal in connection therewith, or (y) other than as specified in the following clause (iii) , any Utilities upon the Premises that either
Sample 1
Operations and Maintenance Work means all work related to the operation, testing, management, administration and maintenance of (i) the Premises; provided, that, the Lessee shall not be responsible for the operation, testing, management, administration and maintenance of (x) the access roadway identified as “Elevated Roadway Excluded from Delta O&M Responsibility” and shown in red vertical hatching on Exhibit 6 (Delta Leasehold) (page 2 of 2) or any paving, lighting, signage, storm drains, culverts, cables, supporting structures, cleaning and snow and ice removal in connection therewith, or (y) other than as specified in the following clause (iii), any Utilities upon the Premises that either (1) are not specifically identified as the Lessee’s responsibility on Exhibit 12 (Utility O&M Responsibilities) or (2) are specifically identified on such Exhibit 12 (Utility O&M Responsibilities) as the responsibility of the Port Authority or other non-Lessee party, (ii) the New Substation and related systems to the extent described as the Lessee’s responsibility on Exhibit 2 (O&M Responsibilities with respect to Certain Off-Premises Facilities) and (iii) (x) subject to clause (y) above, all Utilities located upon the Premises that exclusively serve the Premises and (y) certain Utilities upon the Premises and off the Premises as required by Section 16(c) and identified as the Lessee’s responsibility on Exhibit 12 (Utility O&M Responsibilities); including, in each of clauses (i), (ii) and (iii), any repair, modification, reconstruction, rehabilitation, restoration, renewal and replacement of each of the foregoing, all as required under this Agreement, but excluding the D&C Work. For the avoidance of doubt, except as expressly included in this definition of “Operations and Maintenance Work,” the Lessee shall not be responsible for performing Operations and Maintenance Work with respect to any Off-Premises Facilities whether or not any portion of such Off-Premises Facilities are located within the lease lines of the Premises. For further clarity, the Port Authority shall be responsible for performing, or causing to be performed, the operation, testing, management, administration and maintenance of the portions of the pedestrian bridge connecting the New Terminal Facilities to the East Garage described in Section 5(b)(2)(ii)(a), the unifying architectural connecting structure described in Section 5(b)(2)(ii)(c) and the New Substation and related systems, except to the extent described as the Lessee’s re...
Sample 1

Examples of Operations and Maintenance Work in a sentence

  • Roadside Operations and Maintenance Price means the total fixed price compensation (excluding actual, direct Pass Through Cost Items) that the Joint Board is required to pay TSP for the Roadside Operations and Maintenance Work.

  • Customer Service Center (CSC) Operations and Maintenance Work (years 1 through 7) means the Work that TSP is required to perform pursuant to TR Section OM and CS.

  • TSP from time to time may recommend modifications to the Operations and Maintenance Work or level of service.

  • The Operations and Maintenance Work also includes provision of all insurance, bonds, warranties, guaranties and other forms of protections required under this Contract.

  • The scope of the Operations and Maintenance Work shall remain in effect for the balance of the TCS Operations and Maintenance Term, subject to such revision, amendment and updating as may be required by the Joint Board (except if incapable of being supported by the final system configuration as indicated in the Final System Documentation) or as may be proposed by TSP and approved in writing by the Joint Board.

  • TSP shall, at all times, deposit all Gross Revenues that it collects in performing the Operations and Maintenance Work into the distinct accounts established and maintained by the Custodian, in accordance with the time frames provided in the Custody and Revenue Control Agreement.

  • TSP shall obtain and maintain and shall require all Subcontractors of all tiers with access to sensitive information to obtain and maintain Crime (Blanket Fidelity) with limits of not less than $5,000,000 covering employee dishonesty, forgery and alteration, and “all risks” of loss or destruction of moneys and securities held by TSP or its Subcontractors in the performance of the Operations and Maintenance Work hereunder.

  • The Operations and Maintenance Work includes all day-to-day services required for the operation of the TCS and toll processing, collection, violations processing and back-office violations enforcement in accordance with the TR, and all relevant Plans approved by the Joint Board pursuant to TR Section TP, at standards generally accepted in the toll processing and service center industry and meeting or exceeding the Performance Requirements.

  • TSP shall timely make all submittals required by the Contract Documents in accordance with performance of the Operations and Maintenance Work, and all such submittals shall be accurate and complete.

  • If such further changes to the Operations and Maintenance Work cause or will cause an increase or decrease in the cost of performing the Operations and Maintenance Work, any adjustment to the TCS Total Toll Collection System Operations and Maintenance Price and/or the Performance Requirements shall be subject to the provisions of Section 13.


More Definitions of Operations and Maintenance Work

Operations and Maintenance Work means the work occurring after the In- Service Date associated with operations and maintenance of the NWRRDS and administering the terms of this Agreement.
Sample 1

Related to Operations and Maintenance Work

  • Operations and maintenance means a project delivery method in which the District enters into a single contract for the routine operation, routine repair, and routine maintenance of an infrastructure facility.

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Operation and Maintenance Costs means the costs of:

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Operation and Maintenance Expenses or ‘O&M expenses' means the expenditure incurred on operation and maintenance of the project, or part thereof, and includes the expenditure on manpower, repairs, spares, consumables, insurance and overheads;

  • Support and Maintenance Services means the support and maintenance services described in Section 1 of these Support Terms.

  • Routine maintenance means activities to keep an impervious surface as near as possible to its constructed condition. This includes ordinary maintenance activities, resurfacing paved areas, and exterior building changes or improvements which do not materially increase or concentrate stormwater runoff, or cause additional nonpoint source pollution.

  • Deferred Maintenance means improvements necessary for continued operations which do not improve productivity or alter the process technology.

  • Scheduled Maintenance means routine maintenance scheduled by Orange to implement generic changes to, or updates of, the Orange Services or the Orange Network.

  • Prosecution and Maintenance means, with regard to a particular Patent, the preparation, filing, prosecution and maintenance of such Patent, as well as re-examinations, reissues and the like with respect to that Patent, together with the conduct of interferences, the defense of oppositions and other similar proceedings with respect to that Patent.

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Retail Service and Maintenance Sector Means the service and maintenance of retail facilities which includes financial institutions, retail businesses, schools and hospitals but does not include commercial premises as defined.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Maintenance Costs means parts and materials, sublet and labour costs of a qualified licensed mechanic for the maintenance of the Revenue Service Vehicles, but shall not include costs associated with interior and exterior transit advertising signs and non-mechanical servicing of Revenue Service Vehicles such as fuelling, clearing fareboxes, cleaning and painting wheel rims, vehicle washing and other work performed by a serviceman; and,

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Maintenance Term means the period of time for which Customer has purchased Maintenance Services, as evidenced by the Purchase Order delivered by Customer in connection therewith, together with all renewals effected in accordance with Section 4 of this Agreement.

  • Software Maintenance means the process of modifying software after delivery to correct faults, improve performance or other attributes, or adapt to a changed environment. (Reference ISO/IEC 14764:2006, as amended or superseded.) Software maintenance does not include any customization or configuration.

  • Maintenance Schedule means a document which describes the specific scheduled maintenance tasks and their frequency of completion necessary for the safe operation of those aircraft to which it applies;

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Period of Maintenance means the specified period of maintenance from the date of completion of the works, as certified by the Engineer.

  • Maintenance and Operations Revenue or “M&O Revenue” means (i) those revenues which the District receives from the levy of its annual ad valorem maintenance and operations tax pursuant to Section 45.002 of the TEXAS EDUCATION CODE, or other lawful authority, and Article VII § 3 of the TEXAS CONSTITUTION, plus (ii) all State revenues to which the District is or may be entitled under the applicable provisions of the TEXAS EDUCATION CODE or any other statutory provision as well as any amendment or successor statute to these provisions, as applicable, less

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production. Manual Load Dump Action:

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”