Operational Installed Capacity definition

Operational Installed Capacity. The gross generating capacity, in MW, of the Selected Project that has achieved Commercial Operation and for which an Independent Engineer’s report has been submitted to NYSERDA pursuant to Section 2.01(c) of this Agreement.
Sample 1Sample 2Sample 3

Examples of Operational Installed Capacity in a sentence

  • The Contract Tenor under this Agreement shall be [20/25] years; provided that, once the Contract Delivery Term has begun, if a Force Majeure causes the cessation of production or delivery of at least fifty percent (50%) of the Operational Installed Capacity, the Contract Tenor for such portion of the Selected Project affected by such Force Majeure shall be extended on a day-for-day basis for the duration of such cessation of production or delivery.

  • Every twelve (12) months thereafter, Seller shall provide incremental additional Contract Security in an amount equal to the product of the Uncompleted Offer Capacity (in MW) (less any Offer Capacity Reduction as defined in Section 15.07(b)) and ten-thousand dollars ($10,000), until such time as the Operational Installed Capacity equals or exceeds the product of 0.95 and the Offer Capacity (less any Offer Capacity Reduction as defined in Section 15.07(b)).

  • On a prorated basis, expressed as a fraction of the Contract Security equal to the Operational Installed Capacity divided by the product of 0.95 and the Offer Capacity, within thirty (30) Business Days of NYSERDA’s receipt of an attestation from the appropriate representative of Seller that the Operational Installed Capacity is greater than zero and less than the product of 0.95 and the Offer Capacity.

  • Amounts required by Seller as Contract Security will be reduced and refunded by NYSERDA to Seller as follows: Within thirty (30) Business Days of XXXXXXX’s receipt of an Independent Engineer’s report (which may be the same report submitted for purposes of Section 2.01(c) of this Agreement) demonstrating that the Operational Installed Capacity equals or exceeds the product of 0.95 and the Offer Capacity.

  • A licensed professional engineer with expertise in the development of offshore wind energy projects, reasonably selected by and retained by Seller in order to determine the Operational Installed Capacity of the Selected Project as provided in Section 2.01(c) of this Agreement.

  • As a condition precedent to NYSERDA’s purchase obligation in Section 2.01(a), Seller shall deliver to NYSERDA the report of an Independent Engineer demonstrating that the Operational Installed Capacity of the Selected Project is no greater than the Maximum Project Capacity.

  • For clarity, the cumulative total amount of Contract Security returned to Seller under this Section 15.06(b) at any point in time shall not exceed the amount equal to the Contract Security multiplied by the Operational Installed Capacity at that point in time divided by the product of 0.95 and the Offer Capacity.

Related to Operational Installed Capacity

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]