Minor Field Changes definition

Minor Field Changes means changes or deviations from the Judicial Council approved System plans, System drawings or Construction Documents that do not materially deviate from or affect the design, construction, installation, operation, or aesthetics of the System as originally approved by the Judicial Council.
Sample 1Sample 2Sample 3
Minor Field Changes shall have the meaning set forth in Section 2.15.
Sample 1Sample 2Sample 3
Minor Field Changes means any changes to the Plans and Specifications which satisfy all of the following conditions and requirements:
Sample 1Sample 2Sample 3

Examples of Minor Field Changes in a sentence

  • Except for Minor Field Changes and Code Compliance Changes (each as defined below), if Developer desires to amend or modify the Plans and Specifications or utilize a change order, Developer shall provide three (3) business days’ prior written notice to Owner (each, a “Change Notice”).

  • All notices and other communications to the Company provided for herein shall be in writing and shall be deemed to have been duly given if delivered personally or sent by registered or certified mail, return receipt requested, postage prepaid to the following addresses, or in the case of the undersigned, the address provided on the signature page below (or such other address as either party shall have specified by notice in writing to the other): If to the Company: Carriage Services, Inc.

  • Notwithstanding anything herein to the contrary, Developer may make Minor Field Changes and Code Compliance Changes in the Approved Plans without the consent of Tenant.

  • The Approved Development Budget may not be amended without Prudential’s prior consent, except as provided in this Section and as a result of Minor Field Changes as provided in, and in accordance with, Section 4.6. Prudential’s approval shall not be required for any change in the Approved Development Budget which merely reallocates demonstrated line item savings to line item overruns, as long as Extra Space shall notify Prudential in writing promptly prior to making any such change.

  • Developer shall not amend the Approved Plans or utilize a change order except upon the terms and conditions set forth in this Section 2.7.4. Except for Minor Field Changes and Code Compliance Changes (each as defined below), if Developer desires to amend or modify the Approved Plans or utilize a change order, Developer shall provide ten (10) Business Days’ prior written notice to Tenant (each, a “Change Notice”).

  • As defined in Section 10.1. Table of Contents Minor Field Changes.

  • Except for Minor Field Changes, if Extra Space desires to amend or modify the Construction Plans or the Construction Contract or utilize a Change Order, Extra Space shall provide five (5) days’ prior notice to Prudential and the Construction Consultant (a “Change Notice”).


More Definitions of Minor Field Changes

Minor Field Changes means changes or deviations from the DGS approved System plans, System drawings or Construction Documents that do not materially deviate from or affect the design, construction, installation, operation or aesthetics of the System as originally approved by the DGS.
Sample 1Sample 2
Minor Field Changes means, collectively, changes to the Construction Plans, identified in Section 4.6 which satisfy all of the conditions and requirements set forth in Section 4.6.
Sample 1
Minor Field Changes means any minor changes to Landlord’s Work, provided that the same satisfy all of the following conditions and requirements: (i) the same comply with all applicable laws; (ii) with respect to any substitution, elimination or 2892369_8 replacement of materials, such substituted materials are of equal or superior quality, durability and (if applicable) warranty, to the materials which are being replaced, and the substitution shall not change or materially diminish the appearance, accessibility, or use of the Premises, (collectively, the “Landlord Change Conditions”). Landlord shall from time to time, respond to any inquiries from Tenant’s representative regarding Minor Field Changes, and upon written request from Tenant furnish to Tenant’s representative a log or other written description of all Minor Field Changes performed by or on behalf of Landlord. Landlord shall pay all costs and expenses resulting from the implementation of any Landlord Changes.
Sample 1
Minor Field Changes means any change to the Plans and Specifications which (a) individually does not cause any line item in the Project Budget to be increased or decreased by more than Fifty Thousand Dollars ($50,000.00) and, when added to all previous such change orders resulting from Minor Field Changes, does not cause an aggregate net increase or decrease to the total Project Budget of more than Two Hundred Fifty Thousand Dollars ($250,000.00); and (b) does not diminish the value or utility of the Improvements or the mechanical, structural, or architectural integrity thereof; and (c) shall not involve any substitution or elimination of materials; or if it does involve material substitution, the substituted materials are of equal or superior quality, durability and appearance to the materials originally specified in the Plans and Specifications, and the substitution shall not materially change the appearance or use of the Improvements.
Sample 1
Minor Field Changes means any changes to the Approved Plans which satisfy all of the following conditions and requirements: (i) the change shall not involve any substitution or elimination of materials; or if it does involve material substitution, the substituted materials are of equal or superior quality, durability and appearance to the materials which are being replaced, and the substitution shall not materially change the appearance or use of the Project; (ii) the change shall not diminish the value or utility of the Project or the mechanical, structural or architectural integrity thereof; and (iii) the change shall not require any change or modification to or amendment of the building permits issued by the applicable governmental authority for construction of the Project.
Sample 1

Related to Minor Field Changes

  • Effective Technological Measures means those measures that, in the absence of proper authority, may not be circumvented under laws fulfilling obligations under Article 11 of the WIPO Copyright Treaty adopted on December 20, 1996, and/or similar international agreements.

  • X-ray field means that area of the intersection of the useful beam and any one of the set of planes parallel to and including the plane of the image receptor, whose perimeter is the locus of points at which the exposure rate is one-fourth of the maximum in the intersection.

  • Minor Works has the meaning given to it in paragraph 2.7(a) of Schedule 4 (Persons with Disabilities and Disability Discrimination);

  • Proposed Change Order (PCO means a document that informs Contractor of a proposed change in the Work and appropriately describes or otherwise documents such change including Contractor’s response of pricing for the proposed change.

  • Alternative nicotine product means any vaping product, whether or not it includes nicotine, including electronic smoking devices, that can be ingested into the body by chewing, smoking, absorbing, dissolving, inhaling, or by any other means. ‘Alternative nicotine product’ does not include:

  • Roll-on product means any antiperspirant or deodorant that dispenses active ingredients by rolling a wetted ball or wetted cylinder on the affected area.

  • Assistive technology means the devices, aids, controls, supplies, or appliances described in OAR 411-300-0150 that are purchased to provide support for a child and replace the need for direct interventions to enable self-direction of care and maximize independence of the child.

  • Manufacturing Process means any process for—

  • Licensed Field of Use means all fields.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Licensee Improvements means Improvements created, conceived, or reduced to practice by or for Licensee.

  • Existing Product means any formulation of the same product category and form sold, supplied, manufactured, or offered for sale in California prior to the following dates, or any subsequently introduced identical formulation:

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Licensed Field means all fields of use.

  • Auricular acupuncture means the subcutaneous insertion of sterile, disposable acupuncture needles

  • Field of Use means all fields of use.

  • Combination Products means any product containing both a pharmaceutically active agent or ingredient which constitutes a Licensed Product and one or more other pharmaceutically active agents or ingredients which do not constitute Licensed Products.

  • Biologically-based mental illness means schizophrenia, schizoaffective disorder, major depressive disorder, bipolar disorder, paranoia and other psychotic disorders, obsessive-compulsive disorder, and panic disorder, as these terms are defined in the most recent edition of the diagnostic and statistical manual of mental disorders published by the American Psychiatric Association.

  • complex product means a product which is composed of multiple components which can be replaced permitting disassembly and re-assembly of the product.

  • Edible cannabis product means cannabis product that is intended to be used, in whole or in part, for human consumption, including, but not limited to, chewing gum, but excluding products set forth in Division 15 (commencing with Section 32501) of the Food and Agricultural Code. An edible cannabis product is not considered food, as defined by Section 109935 of the Health and Safety Code, or a drug, as defined by Section 109925 of the Health and Safety Code.

  • Customizations means those features, functions, interfaces or other aspects of the Contractor Customized Software that have been specifically developed or customized for District. Contractor Customized Software will include any and all bug fixes and other nonmaterial revisions to Contractor Customized Software, regardless of whether District has funded such bug fixes or other revisions.

  • Developed Technology means any Technology including, without limitation, any enhancements, substitutions or improvements to the Core Technology that is (a) discovered, developed or otherwise acquired by DURA pursuant to the terms of the Development Agreement or (b) otherwise acquired by or on behalf of Xxxxxx Corp. II during the term of the Development Agreement.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Collaboration Product means a pharmaceutical product containing or comprising Compound in any dosage form alone, or in combination with, one or more other pharmaceutically active ingredients, and any and all Improvements thereto.

  • Licensed Compounds means any EZH2 Compound(s) that is:

  • Biosimilar Product means, with respect to a Licensed Product in any country, any biosimilar product sold by a Third Party not authorized by or on behalf of Celgene, its Affiliates or Sublicensees, (a) that is a biosimilar biological product, as defined in 21 USC 379j-51 (or any successor or replacement thereof), a similar biological medicinal product, as defined in Annex I to Directive 2001/83/EC (or any successor or replacement thereof), or any similar biosimilar or generic product under the Laws of any country or jurisdiction, or (b) regarding which Regulatory Approval is obtained by referencing Regulatory Data of such Licensed Product.