Mid-Span Fiber Meet definition

Mid-Span Fiber Meet. An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of 47 U.S.C §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network and is limited to the Interconnection of facilities between the CenturyLink Serving Wire Center and the location of the CLEC switch or other equipment located within the area served by the CenturyLink Serving Wire Center. Minutes of Use: Shall be abbreviated as MOU. Multiple Exchange Carrier Access Billing (MECAB): The document prepared by the Billing Committee of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECAB document, published by ATIS (0401004-00XX), contains the recommended guidelines for the billing of an Access Service provided by two or more LECs, or by one LEC in two or more states within a single LATA. Multiple Exchange Carriers Ordering and Design Guidelines for Access Services - Industry Support Interface (MECOD): A document developed by the Ordering/Provisioning Committee under the auspices of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECOD document, published by ATIS (0404120-00XX), establishes methods for processing orders for Access Service that is to be provided by two or more LECs. National Emergency Number Association (NENA): A not-for-profit corporation established in 1982 to further the goal of “One Nation-One Number” for emergency calls. NENA is a networking source and promotes research, planning, and training. NENA strives to educate, set standards and provide certification programs, legislative representation and technical assistance for implementing and managing 911 systems.
Sample 1Sample 2Sample 3
Mid-Span Fiber Meet means an Interconnection architecture whereby two carriers’ transmission facilities meet at a mutually agreed-upon Point of Interconnection (“POI”), limited by technical feasibility and the availability of facilities, utilizing a fiber hand-off and, at the delivering carrier’s option, may interface with such carrier’s collocated equipment to gain access to unbundled Network Elements.
Sample 1Sample 2Sample 3
Mid-Span Fiber Meet or “Fiber Meet” An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic. The “point” of Interconnection for purposes of Sections 251(c)(2) and 251(c)(3) remains on the Local Exchange Carrier’s network.
Sample 1Sample 2Sample 3

Examples of Mid-Span Fiber Meet in a sentence

  • When the POI is connected to the CenturyLink End Office Switch or in a Mid-Span Fiber Meet arrangement connected to the CenturyLink End Office Switch, and calls from CLEC End Users are terminating to CenturyLink End Users through the End Office Switch, CLEC shall pay CenturyLink End Office termination.

  • CLEC shall establish a CLLI code for the facility ACTL at the Mid-Span Fiber Meet in addition to any other CLLI code required for the trunks in this Agreement.

  • In the event the Parties agree to adopt a Mid-Span Fiber Meet arrangement, each Party agrees to (a) bear all expenses associated with the purchase of equipment, materials, or services necessary to facilitate and maintain such arrangement on its side of the fiber hand-off to the other Party and (b) compensate the terminating Party for transport of traffic from the POI to the terminating Party’s IP at rates set forth in Exhibit A.

  • When the POI is connected to the CenturyLink Tandem Switch or in a Mid-Span Fiber Meet arrangement connected to the CenturyLink Tandem Switch, when calls from CLEC End Users are terminating to CenturyLink End Users through the CenturyLink Tandem Switch, CLEC will pay CenturyLink Tandem Switching, Common Transport, and End -Office termination.

  • CLEC shall establish a CLLI code for the facility ACTL at the Mid-Span Fiber Meet in addition to any message/switch ACTL at the CenturyLink Serving Wire Center.

  • CLEC shall establish a CLLI code for the facility ACTL at the Mid-Span Fiber Meet in addition to any other Trunk ACTL required for the trunks in this Agreement.

  • A Mid-Span Fiber Meet within an existing GTE exchange area whereby the Parties mutually agree to jointly plan and engineer their facility POI at a designated manhole or junction location.

  • II-4 1.57 Mid-Span Fiber Meet ..............................................

  • When the POI is connected to the CenturyLink Tandem Switch or in a Mid-Span Fiber Meet arrangement connected to the CenturyLink Tandem Switch, when calls from CLEC End Users are terminating to CenturyLink End Users through the CenturyLink Tandem Switch, CLEC will pay CenturyLink Tandem Switching, Common Transport, and End-Office termination.

  • A Mid-Span Fiber Meet within an existing CenturyTel exchange area whereby the Parties mutually agree to jointly plan and engineer their facility IP at a designated manhole or junction location with each Party being individually responsible for its incurred costs in establishing this arrangement.


More Definitions of Mid-Span Fiber Meet

Mid-Span Fiber Meet. An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network and is limited to the Interconnection of facilities between the CenturyLink Serving Wire Center and the location of the CLEC switch or other equipment located within the area served by the CenturyLink Serving Wire Center. Minutes of Use: Shall be abbreviated as MOU. Multiple Exchange Carrier Access Billing (MECAB): The document prepared by the Billing Committee of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECAB document, published by ATIS (0401004-00XX), contains the recommended guidelines for the billing of an access service provided by two or more LECs, or by one LEC in two or more states within a single LATA. Multiple Exchange Carriers Ordering and Design Guidelines for Access Services - Industry Support Interface (MECOD): A document developed by the Ordering Solutions Committee under the auspices of the Ordering and Billing Forum (OBF), which functions under the auspices of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECOD document, published by ATIS (0404120- 00XX), establishes methods for processing orders for access service that is to be provided by two or more LECs. National Emergency Number Association (NENA): A not-for-profit corporation established in 1982 to further the goal of “One Nation-One Number” for emergency calls. NENA is a networking source and promotes research, planning, and training. NENA strives to educate, set standards and provide certification programs, legislative representation and technical assistance for implementing and managing 911 systems.
Sample 1Sample 2Sample 3
Mid-Span Fiber Meet is an Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network and is limited to the Interconnection of facilities between the CenturyLink Serving Wire Center and the location of the CMRS switch or other equipment located within the area served by the CenturyLink Serving Wire Center
Sample 1Sample 2Sample 3
Mid-Span Fiber Meet. GTE will charge special access (flat rated) transport from the applicable intrastate access tariff and will rate charges between the "IP" and GTE's interconnection switch. Charges will be reduced to reflect the proportionate share of the facility that is used for transport of traffic originated by GTE. DTI will charge flat rated transport to GTE for DTI facilities used by GTE at their tariffed rates or as mutually agreed, not to exceed GTE rates. DTI will apply charges based on the lesser of; (i) the airline mileage from the "IP" to the DTI switch; or (ii) the airline mileage from the GTE switch to the serving area boundary.
Sample 1Sample 2Sample 3
Mid-Span Fiber Meet means an Interconnection architecture whereby two carriers' fiber transmission facilities meet at a mutually agreed-upon IP.
Sample 1Sample 2
Mid-Span Fiber Meet. An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network. Minutes of Use: Shall be abbreviated as MOU. Multiple Exchange Carrier Access Billing (MECAB): The document prepared by the Billing Committee of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECAB document, published by ATIS (0401004-00XX), contains the recommended guidelines for the billing of an access service provided by two or more LECs, or by one LEC in two or more states within a single LATA. Multiple Exchange Carriers Ordering and Design Guidelines for Access Services - Industry Support Interface (MECOD): A document developed by the Ordering Solutions Committee under the auspices of the Ordering and Billing Forum (OBF), which functions under the auspices of of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECOD document, published by ATIS (0404120- 00XX), establishes methods for processing orders for access service that is to be provided by two or more LECs. National Emergency Number Association (NENA): A not-for-profit corporation established in 1982 to further the goal of “One Nation-One Number” for emergency calls. NENA is a networking source and promotes research, planning, and training. NENA strives to educate, set standards and provide certification programs, legislative representation and technical assistance for implementing and managing 911 systems.
Sample 1Sample 2
Mid-Span Fiber Meet is an interconnection architecture whereby two carriers mutually agree to jointly plan and engineer their facility meet-point at a designated manhole or junction location by means of a fiber splice transmission facility.
Sample 1

Related to Mid-Span Fiber Meet

  • Fiber Meet means an Interconnection architecture method whereby the Parties physically Interconnect their networks via an optical fiber interface (as opposed to an electrical interface), using a single point-to-point linear chain SONET system.

  • Mid-Span Meet means an Interconnection between two (2) networks, designated by two (2) Telecommunications Carriers, whereby each provides its own cable and equipment up to the Meet Point of the cable facilities. “Mid-Span Meet POI” A Mid-Span Meet POI is a negotiated Point of Interface, limited to the Interconnection of facilities between the CenturyLink Serving Wire Center location and the location of the CLEC switch or other equipment located within the area served by the CenturyLink Serving Wire Center.

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a preselected number of dose monitor units have been delivered.

  • Master Meter means the meter controlled by the licensed distributor and used for settlement of the master bill with the master consumer;

  • Large municipal separate storm sewer system means all municipal separate storm sewers that are either:

  • Secondary dose monitoring system means a system which will terminate irradiation in the event of failure of the primary dose monitoring system.

  • Local public procurement unit means any political subdivision or unit thereof which expends public funds for the procurement of supplies, services, or construction.

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Small municipal separate storm sewer system or "small MS4" means all separate storm sewers that are (i) owned or operated by the United States, a state, city, town, borough, county, parish, district, association, or other public body (created by or pursuant to state law) having jurisdiction over disposal of sewage, industrial wastes, stormwater, or other wastes, including special districts under state law such as a sewer district, flood control district or drainage district, or similar entity, or an Indian tribe or an authorized Indian tribal organization, or a designated and approved management agency under § 208 of the CWA that discharges to surface waters and (ii) not defined as "large" or "medium" municipal separate storm sewer systems or designated under 4VAC50-60-380 A 1. This term includes systems similar to separate storm sewer systems in municipalities, such as systems at military bases, large hospital or prison complexes, and highway and other thoroughfares. The term does not include separate storm sewers in very discrete areas, such as individual buildings.

  • Micro wireless facility means a small cell facility that is not larger in dimension than 24 inches in length, 15 inches in width, and 12 inches in height and that has an exterior antenna, if any, not longer than 11 inches.

  • External beam radiation therapy means therapeutic irradiation in which the source of radiation is at a distance from the body.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Public water supply system means a system for the provision to the public of piped water for human consumption, if the system has at least fifteen service connections or regularly serves at least twenty-five individuals. The term includes any source of water and any collection, treatment, storage, and distribution facilities under control of the operator of the system and used primarily in connection with the system, and any collection or pretreatment storage facilities not under such control which are used primarily in connection with the system.

  • Critical Energy Infrastructure Information means all information, whether furnished before or after the mutual execution of this Agreement, whether oral, written or recorded/electronic, and regardless of the manner in which it is furnished, that is marked “CEII” or “Critical Energy Infrastructure Information” or which under all of the circumstances should be treated as such in accordance with the definition of CEII in 18 C.F.R. § 388.13(c)(1). The Receiving Party shall maintain all CEII in a secure place. The Receiving Party shall treat CEII received under this agreement in accordance with its own procedures for protecting CEII and shall not disclose CEII to anyone except its Authorized Representatives.

  • CAISO-Approved Meter means any revenue quality, electric energy measurement meter furnished by Seller, that (a) is designed, manufactured and installed in accordance with the CAISO’s metering requirements, or, to the extent that the CAISO’s metering requirements do not apply, Prudent Electrical Practices, and (b) includes all of the associated metering transformers and related appurtenances that are required in order to measure the net electric energy output from the Generating Facility.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Minimum Transaction Size means the minimum value of subsequent subscriptions,