Method of Measurement definition

Method of Measurement. The manner in which a pay item is measured to conform with the pay unit. “Minor Design Services” – Small in scope and up to a dollar figure of $5000.00 “Notice of Claim” - A written notification submitted to the Engineer that a demand or request for additional compensation potentially may be made. The notification shall
Method of Measurement. All surfaces shall be measured by the square metre, complete in place. Quality Assurance: Terraseeding shall meet the performance measures as per OPSS.MUNI 804 If the completed work does not meet the Performance Measure after the sixty or ninety day inspection, the Contract Administrator shall notify the Contractor in writing and the Contractor shall re-apply the specified materials in accordance with this specification within 14 calendar days of receiving the notification. The Contractor shall maintain the re-applied surface in a functional condition for a period of one year. Contractor shall make periodic inspections of the composted surface for effectiveness and shall immediately correct all deficiencies. Where deficiencies exist, additional material shall be installed immediately to required depth. The Contractor shall maintain the site until conditions permit application or re- application of compost and seed.‌ All replaced compost and seed shall be subject to the original Contract specifications. The unit prices for seeding shall constitute full compensation for supplying and placing; watering and fertilizer application as specified; and for all labour, equipment and materials necessary to complete the work. Payment shall be released by 50% upon placement of the Terraseed, and the remaining 50% will be released 30 days after satisfactory germination of the permanent seed species. Satisfactory germination shall be as specified for the 90 day inspection in OPSS.MUNI 804
Method of Measurement means the manner in which a "Pay Item" is measured by the "Pay Unit." 101.3.29 Non-Conformance - shall have the meaning assigned to such term in Section 110.1 of these General Provisions. 101.3.30 Non Pre-Priced Work - shall have that meaning ascribed to such term in Section 104.2.2 of these General Provisions. 101.3.31 Notices - shall have that meaning ascribed to such term in the Contract.

Examples of Method of Measurement in a sentence

  • Walls, facades, storage/refuse areas designated as inaccessible to the public but are visible to the public as described in paragraph ### may be exempted from said material requirements if screened from view provided all screenings are designed and constructed of vegetative or building material approved by the Planning Department.

  • Produce a mix that consists of 60 percent fine aggregate and 40 percent coarse aggregate 752.05 Method of Measurement Remove the last paragraph from 752.05:PAGE 39910/01/17 752.06 Basis of Payment PAGE 400 10/01/17 Replace “Fence Terminal – Wood Posts” in the Pay Item List with “Fence Terminal”.

  • Method of Measurement: Method of Measurement will be in accordance with Subsections 401.14 and 401.15 of the Standard Specifications.

  • Method of Measurement: Method of Measurement will be in accordance with Subsections 401.14 and 401.15 of the Standard Specifications.Basis of Payment: All work completed under this item shall be considered for full payment and subsequently modified in accordance with the procedures enumerated under 401699.

  • Method of Measurement The works shall be measured net, notwithstanding any general or local custom, except where otherwise provided in the Contract.

  • The Bills of Quantities, unless otherwise expressly stated therein, shall be deemed to have been prepared in accordance with the principles of the latest edition of the Civil Engineering Standard Method of Measurement (CESMM).

  • Many national standard reference guides have been prepared on the subject, and one such guide is the Standard Method of Measurement of theU.K. Institution of Civil Engineers.

  • References in Erosion Control Special Provisions from the aforementioned website to Method of Measurement, Basis of Payment, or any other statement regarding direct payment for Erosion & Sediment Control measures shall be disregarded.

  • Method of Measurement: The quantity shall be the actual coverage area in Square Foot of surfaces treated and shall include all surface preparation, material, and application costs.

  • In the imperative mood, the subject “the bidder” or “the Contractor” is understood.All other requirements to be performed by others, with the exception of the Method of Measurement and the Basis of Payment Articles, have been written in the active voice, but not in the imperative mood.


More Definitions of Method of Measurement

Method of Measurement means the Property Council of Australia's Method of Measurement for Lettable Area published March 1997.
Method of Measurement. Per UDHS questionnaire for women. Supplementary data generated using CHC evaluative surveys. In CHC survey, a caregiver of a child 0-<6 months will be asked to list all possible things the child was fed in the last 24 hours, besides breast milk. Data Source(s): UDHS/UAIS reports when available. CHC evaluative surveys: Observation 1 early 2015; Observation 2 late 2016; Observation 3 early 2018. Timing / Frequency of Data Collection: By UDHS calendar. CHC Observation 1 early 2015; Observation 2 late 2016; Observation 3 early 2018, Estimated Cost of Data Collection: Periodic CHC evaluations estimated at US$ 150,000 each covering 16 districts Responsible Individual(s): Research and M&E Officers
Method of Measurement. Individuals are asked if anyone in the family had a cough lasting more than two weeks in the past 6 months. For the affirmative response, individuals are asked whether they sought TB screening and testing services for that cough episode. Data Source(s): CHC evaluative survey reports: Observations 1, 2, 3. Frequency of Data Collection: CHC Observation 1 early 2015; Observation 2 late 2016; Observation 3 early 2018 Estimated Cost of Data Collection: Periodic CHC evaluations estimated at US$ 150,000 each covering 16 districts Responsible Individual(s): Research and M&E Officers

Related to Method of Measurement

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Preventive measures means any reasonable measures taken by any person after an incident has occurred to prevent or minimize pollution damage.

  • COVID-19 Measures means any quarantine, “shelter in place”, “stay at home”, workforce reduction, social distancing, shut down, closure or sequester order, guideline, recommendation or Law, or any other applicable Laws, guidelines or recommendations by any Governmental Entity in connection with or in response to COVID-19.

  • Performance Measure means one or more of the following selected by the Committee to measure Company, Affiliate, and/or business unit performance for a Performance Period, whether in absolute or relative terms (including, without limitation, terms relative to a peer group or index): basic, diluted, or adjusted earnings per share; sales or revenue; earnings before interest, taxes, and other adjustments (in total or on a per share basis); basic or adjusted net income; returns on equity, assets, capital, revenue or similar measure; economic value added; working capital; total shareholder return; and product development, product market share, research, licensing, litigation, human resources, information services, mergers, acquisitions, sales of assets of Affiliates or business units. Each such measure shall be, to the extent applicable, determined in accordance with generally accepted accounting principles as consistently applied by the Company (or such other standard applied by the Committee) and, if so determined by the Committee, and in the case of a Performance Compensation Award, to the extent permitted under Code Section 162(m), adjusted to omit the effects of extraordinary items, gain or loss on the disposal of a business segment, unusual or infrequently occurring events and transactions and cumulative effects of changes in accounting principles. Performance Measures may vary from Performance Period to Performance Period and from Participant to Participant, and may be established on a stand-alone basis, in tandem or in the alternative.

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Daily Measurement Value means the Specified Dollar Amount (if any), divided by 40.

  • Performance Measures means measures as described in Article 12 on which the performance goals are based and which are approved by the Company’s shareholders pursuant to this Plan in order to qualify Awards as Performance-Based Compensation.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Supportive measures means individualized services that are offered to the complainant or the respondent designed to restore or preserve equal access to the District’s education program or activity without unreasonably burdening the other party. The supportive measures must be non-disciplinary and non-punitive in nature; offered before or after the filing of a formal complaint or where no formal complaint has been filed; and offered to either party as appropriate, as reasonably available, and without fee or charge. Examples of supportive measures include, but are not limited to: measures designed to protect the safety of all parties or the District’s educational environment, or deter sexual harassment; counseling; extensions of deadlines or other course-related adjustments; modifications of work or class schedules; campus escort services; mutual restrictions on contact between the parties; changes in work or class locations; leaves of absence; and increased security and monitoring of certain areas of the campus.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • the Measure means the Diocesan Boards of Education Measure 1991;

  • Process unit means equipment assembled for the extraction of natural gas liquids from field gas, the fractionation of the liquids into natural gas products, or other operations associated with processing natural gas products. A process unit can operate independently if supplied with sufficient feed or raw materials and sufficient storage facilities for the products.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Method Detection Level or “MDL” means the minimum concentration of an analyte (substance) that can be measured and reported with a ninety- nine percent (99%) confidence that the analyte concentration is greater than zero (0) as determined by procedure set forth in 40 CFR 136, Appendix B. The method detection level or MDL is equivalent to the LOD.

  • Parameter means a physical, biological, or chemical property of state water when a value of that