Meter error definition

Meter error means a failure to accurately measure and record all of the electrical quantities used that are required by the applicable rate or rates.
Sample 1Sample 2Sample 3
Meter error means a failure to accurately measure and record all of the natural gas or electrical quantities used that are required by the applicable rate or rates.
Sample 1Sample 2Sample 3
Meter error means the failure of a PWC meter on the Customer’s Premises to register or measure accurately within the Tolerance Limits the amount of utilities used or consumed by the Customer.
Sample 1Sample 2Sample 3

Examples of Meter error in a sentence

  • The average Meter error shall be the algebraic average of the errors of the three tests.

  • If the result of tests on a Customer’s Meter shows an average error greater than two percent (2%) slow, then the Customer’s bill for the period during which the Meter error is known to have existed, may be recomputed and the account adjusted on the basis of the test.

  • Total amount of bill.20.4(14) Adjustment of bills.a. Meter error.

  • The level of DE depends to large extent on the spatial distribution and regional availability of resources (EUROSTAT, 2002).

  • In cases of Meter error where the Customer has been overcharged, the amount of the refund or credit to the Customer's account shall be the amount in excess of the average charge since the previous test, or one (1) year, whichever period is shorter.

  • Meter error can result from a fast meter, a slow meter, or a non-registering meter.

  • Meter error will be defined as the arithmetic mean of the absolute value of the error at the check flow test and the absolute value of the error at the full-rated flow test.

  • If the request to test a Meter is made within one year of a previous test, a charge will be added to the Customer’s bill if the metering equipment tests accurate (Meter error is plus or minus less than two percent).

  • Within 7 days after Defendants fund the Gross Settlement Amount, the Administrator will mail checks for all Individual Class Payments, the Administration Expenses, the LWDA’s portion of the PAGA Payment, Class Counsel Attorneys’ Fees, Class Counsel Litigation Costs, and Class Representative Service Payment(s).

  • Meter error corrections can only be applied for one billing period, while other errors can be corrected for a period of up to 12 months.


More Definitions of Meter error

Meter error means a failure to accurately measure and record all of the natural gas used that is required by the applicable rate or rates.
Sample 1Sample 2
Meter error means a failure to accurately measure and record all of the natural gas or electrical quantities used that are required by the applicable rate or rates. “Meter creep” means a continuous apparent accumulation of energy in a meter with voltage applied and the load terminals open circuited.
Sample 1Sample 2
Meter error. The incorrect registration of electric consumption resulting from a malfunctioning or defective meter.
Sample 1

Related to Meter error

  • Meter means, unless otherwise qualified, a device that measures and registers the integral of an electrical quantity with respect to time.

  • Manifest Error means any error that we reasonably believe to be obvious or palpable, including without limitation, offers to execute Transactions for exaggerated volumes of Underlying Assets or at manifestly incorrect market price quotes or prices at a clear loss.

  • Software Error means a reproducible defect or combination thereof in the Software that results in a failure of the Software when used in accordance with the Documentation. Software Errors do not include those errors caused by (a) Licensee’s negligence, (b) any unauthorized modification or alteration Licensee makes to the Software, (c) data that does not conform to Licensor’s specified data format, (d) operator error, or (e) use not conforming to the Licensor’s supported technical environment specified in the Documentation.

  • Error means any failure of the Software to operate in conformance with the Documentation in any material respect.

  • Meter Operator means a party appointed for the purposes of the BSC, to:

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Encounter Data Any Contractor accessing payments for services through the Global Commitment to Health Waiver and Vermont Medicaid programs must provide encounter data to the Agency of Human Services and/or its departments and ensure that it can be linked to enrollee eligibility files maintained by the State.

  • Area Control Error or “ACE” shall mean the instantaneous difference between a Balancing Authority’s net actual and scheduled interchange, taking into account the effects of Frequency Bias and correction for meter error.

  • Imbalance means the difference between Deliveries to KUB for a Customer and Redeliveries by KUB to the Customer.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • distance contract means a contract concluded between a trader and a consumer under an organised distance sales or service-provision scheme without the simultaneous physical presence of the trader and the consumer, with the exclusive use of one or more means of distance communication up to and including the time at which the contract is concluded;

  • Total Service Charges means all charges, after application of all discounts and credits, for Services excluding Taxes, Governmental Charges, equipment, Company ILEC, Company Wireless, Document Delivery Fax, non-recurring, goods and services acquired by Company as Customer’s agent, international pass-through access (Type 3/PTT) and charges for international access or provided by Company (Type 1), charges for security services provided by Cybertrust, Inc. or its affiliates set forth in the Guide as providers of Cybertrust security services and other charges expressly excluded by this Agreement.

  • Medication error means any preventable event that may cause or lead to inappropriate medication use or patient harm, while the medication is in the control of the health care professional, patient, or consumer. Such events may be related to professional practice, health care products, procedures, and systems including, but not limited to: prescribing; order communication; product labeling, packaging and nomenclature; compounding; dispensing; distribution; administration; education; monitoring; and use.

  • Consumption Data means customer specific electric usage data, or weather adjusted data, including but not limited to kW, kWh, voltage, var, power factor, and other information that is recorded by the electric meter for the Company and stored in its systems. Consumption Data also includes payment and service history, account number, and amount billed.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Standard Rate means, for any day, a rate per annum equal to the Bank's announced Prime Rate minus 0% per annum, and each change in the Standard Rate shall be effective on the date any change in the Prime Rate is publicly announced as being effective.

  • HICP Daily Inflation Reference Index means (A) in relation to the first calendar day of any given month, the HICP Monthly Reference Index of the third month preceding such month, and (B) in relation to a calendar day (D) (other than the first calendar day) in any given month (M), the linear interpolation of the HICP Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • CPI Daily Inflation Reference Index means (A) in relation to the first day of any given month, the CPI Monthly Reference Index of the third month preceding such month, and (B) in relation to a day (D) (other than the first day) in any given month (M), the linear interpolation of the CPI Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Catalog Pricing shall be defined as: "The then available list of goods or services, in the most current listing regardless of date, that takes the form of a catalog, price list, price schedule, shelf-price or other viewable format that: