Membrane module definition

Membrane module means the smallest component of a membrane unit in which a specific membrane surface area is housed in a device with a filtrate outlet structure.
Sample 1Sample 2Sample 3
Membrane module means the smallest component of a membrane unit in which a specific
Sample 1

Examples of Membrane module in a sentence

  • Membrane module systems have simple operation with no chemical reactions, no moving parts, and no temperature or pres-cost compared to other technologies.

  • Membrane module cost, membrane replacement cost and membrane life, depend on the material and the manufacture process of the membrane.

  • METHODOLOGYTable 4 - Membrane module design parameters Properties units Fiber internal diameter 220.98 μmThe biogas upgrading plant that was studied and presented in this paper is privately owned and operated at Sebenza in collaboration with the Ekurhuleni Municipality, South Africa where the landfill is located.

  • Membrane module characteristics Stream properties CCMCRMMembranePolarisPolarisSurface, m2 × 10373.41237Channel length [m]Table 8 Properties of the significant streams for the use of a Polaris membrane as the CCM and CRM.

  • Membrane module characteristics Stream properties In Table 10, the energy balance and the main overall performance indexes of these four cases are shown in the 3rd to 6th columns.

  • List of EquipmentPH meter, Colorimeter, TDS meter, Aerobic /Anaerobic reactor 25L capacity, BOD incubator, High accuracy analytical balance (5 digit), Desiccators, RO system with domestic 2‘‘x12‘‘ Membrane module, H2S vial kit, Water analysis kit, UV-Vis spectrophotometer, High volume air sampler, Bomb calorimeter, Fuel cell test kit, Microscope.

  • Epoxy glue; Membrane module diagram; Membrane fibres UF 64Figure 21.

  • Membrane module means the hollow fiber ultrafiltration membranes and the potted plastic headers.

  • Scars on the penis or destruction of the parts of the cavernous body or urethra interfering with erection or markedly affecting coitus..........Gr.9 5.

  • Specifications of pressure driven membrane processes (Van Der Bruggen et al., 2003) 7Table 3-1 Characteristics of Activated Sludge and MBR Sludge 47Table 3-2 Membrane module specification 48Table 3-3 Pressure stepping with time 53Table 4-1 FO water flux (Jv) and solute flux (Js) under baseline conditions where no foulant was added to the feed water.

Related to Membrane module

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Modules means the Base Modules and Extended Modules.

  • Reagent means any product other than fuel that is stored on-board the vehicle and is provided to the exhaust after-treatment system upon request of the emission control system.

  • Fabrication means making up data or results and recording or reporting them.

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Manufacturing Process means any process for—

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • single-use device means a device that is intended to be used on an individual patient during a single procedure.

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • piece-work means any work the pay for which is estimated by the amount of work performed irrespective of the time occupied in its performance;

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Licensed Software includes error corrections, upgrades, enhancements or new releases, and any deliverables due under a maintenance or service contract (e.g., patches, fixes, PTFs, programs, code or data conversion, or custom programming).

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Manufacturing Technology means any and all patents, patent applications, Know-How, and all intellectual property rights associated therewith, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno- associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.