Mechanical repair definition

Mechanical repair means the restoration or replacement of the working parts of a Motor Vehicle, such as the engine and operational software, including diagnosing and detecting faults in Motor Vehicles, and the replacement and programming of a Motor Vehicle’s electric and electronic components.
Sample 1Sample 2Sample 3
Mechanical repair means a method of repair which restores a pressure retaining boundary whereby pressure retaining capability is established through a mechanical, chemical, or physical interface.
Sample 1Sample 2Sample 3
Mechanical repair means a method of repair which restores a pressure retaining boundary to a safe and satisfactory operating condition, where the pressure retaining boundary is established by a method other than welding or brazing.
Sample 1Sample 2Sample 3

Examples of Mechanical repair in a sentence

  • Mechanical repair skills gained by completion of an automotive mechanical apprenticeship program or through experience in a repair garage.

  • Mechanical repair of vehicles on airport property is not allowed.

  • Mechanical repair of vehicles, changing of oil or other fluids is not permitted on Royal Park property.

  • Need is determined to exist when the calculated bed need forecast exceeds the current inventory, the average annual occupancy for all existing and authorized Medicaid certified nursing facility beds was at least 93% and there are no authorized but unconstructed nursing facility beds in the planning district.

  • Mechanical repair methods use steel fasteners and additional wood or steel components to strengthen or reinforce members.

  • Mechanical repair methods for output shafts, bearing journals, bearing housings, sleeve bearings, and labyrinths are to be submitted by the contractor to the Using Agency prior to beginning repair work.Welded parts must be stressed relieved.

  • RINL reserves the right to reject the offers of tenderers whose performance is poor in awarded / ongoing works if any.Work Desc : Mechanical repair works in CSP at CO&CCPCond No Cond DescITEM NO.

  • Mechanical repair and servicing of motor vehicles (including motor cycles, caravans, boat motors, trailers) and domestic gardening equipment.

  • P.D.I./ $16.24 Cleanup* Utility person: $16.02 Car Washer*, under coater*, Laborers, New vehicle check-in, shipper/receiver Lot person $16.30 Car xxxxxx / $11.96 Parts delivery * Flat rate Truck Rate Premium One (1) ton, (Mechanical repair only, excludes Goodwrench, PDI, and Body Repair).

  • Mechanical repair of vehicles, oil changes and washing of vehicles are not permitted in the parking lot.

Related to Mechanical repair

  • Mechanical Completion means that (a) all components and systems of the Project have been properly constructed, installed and functionally tested according to EPC Contract requirements in a safe and prudent manner that does not void any equipment or system warranties or violate any permits, approvals or Laws; (b) the Project is ready for testing and commissioning, as applicable; (c) Seller has provided written acceptance to the EPC Contractor of mechanical completion as that term is specifically defined in the EPC Contract.

  • Repair means to restore to proper operating condition a tank, pipe, spill prevention equipment, overfill prevention equipment, corrosion protection equipment, release detection equipment or other UST system component that has caused a release of product from the UST system or has failed to function properly.

  • Major repair means either: (1) for a dispersal system, repairs required for an OWTS dispersal system due to surfacing wastewater effluent from the dispersal field and/or wastewater backed up into plumbing fixtures because the dispersal system is not able to percolate the design flow of wastewater associated with the structure served, or (2) for a septic tank, repairs required to the tank for a compartment baffle failure or tank structural integrity failure such that either wastewater is exfiltrating or groundwater is infiltrating.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Electrical work Concealed and fire resistant wiring of “ISI” Copper Wire, Distribution board with “MCB”. “ISI” xxxx modular electrical accessories, Landline phone conduit, Cable TV wiring conduit, Separate line for inverter connection, Air-conditioner power point. Painting : Long Lasting and weather resistant acrylic paint to all external walls, All internal walls with white cement based putty finish with OBD. Plumbing & Sanitation : Sanitary xxxx for toilets, plumbing fixtures, CPVC/UPVC pipe and fitting(ISI make), SWR drainage system. Kitchen: Granite platform, ceramic tiles dado upto 2’ height, Stainless Steel sink in Kitchen, Aquaguard point, Connection for washing machine in wash area.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Plumbing system means water supply distribution and disposal piping on the premises, including appliances and equipment attached thereto, between their connection points to a public or private system.

  • Cleaning means the act of removing septage or other wastes from a wastewater treatment system component or grease/waste from a grease interceptor.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Electrical contractor means an electrical contractor as defined in the Regulations;

  • Building Contractor means the building contractor or developer appointed or to be appointed by the Grant Recipient in respect of a Firm Scheme; Business Day means any day other than a Saturday, Sunday or a statutory Bank Holiday in England;

  • Installation Works means, as the context so requires,

  • drainage work means any construction or reconstruction of or any alteration or addition to, or any work done in connection with a drainage installation but shall not include any work undertaken solely for purposes of repair or maintenance;

  • Contractor’s Equipment means all apparatus, machinery, vehicles and other things required for the execution and completion of the Works and the remedying of any defects. However, Contractor’s Equipment excludes Temporary Works, Employer’s Equipment (if any), Plant, Materials and any other things intended to form or forming part of the Equipment.

  • Installation inspector means a person who, by reason of his knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Mechanical restraint means any device or object used to limit a student’s movement.

  • Elevator means any hoisting or lowering device to connect floors or landings, whether or not in service, and all appliances pertaining to the elevator, including any car, platform, shaft, hoistway, stairway, runway, power equipment and machinery; THIS DOES NOT INCLUDE:

  • Emergency repair means work necessary to prevent destruction or dilapidation to real property or structural appurtenances thereto immediately threatened or damaged by fire, flood, earthquake or other disaster.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Plumbing contractor means a licensed master plumber or a person who employs a licensed master plumber full-time to directly supervise the installation of plumbing as his or her representative engaged in the business of plumbing for a fixed sum, price, fee percentage, valuable consideration, or other compensation and who is licensed as a plumbing contractor.

  • HVAC means heating, ventilation and air conditioning.