Mechanical removal definition

Mechanical removal means the use of pumps, skimmers, booms, earthmoving equipment, and other me- chanical devices to contain the dis- charge of oil and to recover the dis- charge from the water or adjoining shorelines.
Sample 1Sample 2Sample 3
Mechanical removal means the use of pumps, skimmers, booms, earthmoving equipment, and other mechanical devices to contain the discharge of oil and to recover the discharge from the water or adjoining shorelines.
Sample 1
Mechanical removal means the use of pumps, skimmers, booms, earthmoving equipment, and other
Sample 1Sample 2

Examples of Mechanical removal in a sentence

  • Mechanical removal shall only be perform in conjunction with Owner approved HEPA air filtration systems.

  • Mechanical removal or large-scale chemical treatment of invasive species or noxious weeds is allowed when hand removal or spot-spraying is not practical, not feasible, or not recommended.

  • Mechanical removal of undesired vegetation and root nodes is permitted.

  • Mechanical removal or large-scale chemical treatment of invasive species.

  • Mechanical removal without initial processing at the seabed was deemed the most likely technology to be used and is the method of mineral extraction assumed herein.

  • Mechanical removal or large-scale chemical treatment of invasive species or noxious weeds included on the Washington State Noxious Weed List as a Class A, B or C weed on shorelands outside of steep or unstable slope areas is encouraged.

  • Mechanical removal of materials from forest areas is not technologically or economically feasible.

  • Mechanical removal consists of the physical removal of aquatic weeds from waterways.

  • Mechanical removal of aquatic weeds may be performed at an additional cost to the Client.

  • Mechanical removal of noxious weeds shall be timed and carried out in a manner to minimize any disruption of wildlife or habitat.

Related to Mechanical removal

  • Graffiti remover means a product labeled to remove spray paint, ink, marker, crayon, lipstick, nail polish, or shoe polish, from a variety of noncloth or nonfabric substrates. “Graffiti Remover” does not include “Paint Remover or Stripper,” “Nail Polish Remover,” or “Spot Remover.” Products labeled for dual use as both a paint stripper and graffiti remover are considered “Graffiti Removers.”

  • Paint remover or stripper means any product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate. “Paint Remover or Stripper” does not include “Multi-purpose Solvent,” paint brush cleaners, products designed and labeled exclusively as “Graffiti Remover,” and hand cleaner products that claim to remove paints and other related coatings from skin.

  • Monthly Minimum Removal Efficiency means the minimum reduction in the pollutant parameter specified when the effluent average monthly concentration for that parameter is compared to the influent average monthly concentration.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Emergency removal for purposes of this Policy shall mean removing a respondent from the District’s education program or activity on an emergency basis, provided that the District undertakes an individualized safety and risk analysis, determines that an immediate threat to the physical health or safety of any student or other individual arising from the allegations of sexual harassment justifies removal, and provides the respondent with notice and an opportunity to challenge the decision immediately following the removal. Emergency Removals as permitted by this Policy shall not be construed to modify any rights under the Individuals with Disabilities Education Act, Section 504 of the Rehabilitation Act of 1973, or the Americans with Disabilities Act.

  • Dry cleaning means any industrial or commercial activity using VOCs in an installation to clean garments, furnishings and similar consumer goods with the exception of the manual removal of stains and spots in the textile and clothing industry;

  • Excavator means any person performing excavation or blasting.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Aboveground tank means a device meeting the definition of tank that is situated in such a way that the entire surface area of the tank is completely above the plane of the adjacent surrounding surface and the entire surface area of the tank (including the tank bottom) is able to be visually inspected.

  • Incinerator means any enclosed device that:

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Nail polish remover means a product designed to remove nail polish and coatings from fingernails or toenails.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Bug and tar remover means a product labeled to remove either or both of the following from painted motor vehicle surfaces without causing damage to the finish:

  • Underground tank means a device meeting the definition of tank whose entire surface area is totally below the surface of and covered by the ground.

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Graffiti shall not include: (1) any sign or banner that is authorized by, and in compliance with, the applicable requirements of the San Francisco Public Works Code, the San Francisco Planning Code or the San Francisco Building Code; or (2) any mural or other painting or marking on the property that is protected as a work of fine art under the California Art Preservation Act (California Civil Code Sections 987 et seq.) or as a work of visual art under the Federal Visual Artists Rights Act of 1990 (17 U.S.C. §§ 101 et seq.). Any failure of Contractor to comply with this section of this Agreement shall constitute an Event of Default of this Agreement.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • CT gantry means the tube housing assemblies, beam-limiting devices, detectors, and the supporting structures and frames which hold these components.

  • Nuclear reactor means any apparatus designed or used to sustain nuclear fission in a self-supporting chain reaction or to contain a critical mass of fissionable material.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.