Mechanical extraction definition

Mechanical extraction means extraction using pressure, heat or cold to extract cannabinoids, and includes rosin presses, dry ice or other similar processes, without employing solvents or gases, approved by the Office.
Sample 1Sample 2Sample 3
Mechanical extraction means non-chemical extraction methods using heat, screens, and presses for purposes of extracting cannabinoids consistent with Type 6, Type N, and Type P manufacturing licenses issued by the state, but excluding the use of any solvents, volatile or non-volatile, in the extraction process.
Sample 1Sample 2

Examples of Mechanical extraction in a sentence

  • Mechanical extraction ventilation may be required if user operations change it to other physical or chemical forms, whether as end products, intermediates or fugitive emissions, which are inhalable.

  • Mechanical extraction techniques use no organic solvents to remove oil from an oilseed.

  • While under the com- plete contract assumption the message-contingent is never optimal, it is op- timal under the imperfect commitment assumption.

  • Exposure controls:Appropriate engineering controls: Mechanical extraction ventilation may be required if user operations change it to other physical or chemical forms, whether as end products, intermediates or fugitive emissions, which are inhalable.

  • Mechanical extraction of tree stumps and roots will not be allowed on sloping areas; only on flat terrain.

  • Mechanical extraction is required from the “hot metal area” for the brazing hearth, welding, soldering and kiln.

  • Series D Senior Unsecured Debenture OfferingOn July 14, 2021, the REIT completed an offering of $225 million 7-year Series D senior unsecured debentures at a fixed rate of 2.44% per annum, payable semi-annually in arrears, and maturing on July 14, 2028.

  • Mechanical extraction of a basilar- artery embolus with the use of flow reversal and a microbasket.

  • Another considerable factor that arose after the war was the entering of female directors and actors into the cinema.

  • Venting of heat and smoke from basements: Mechanical extraction can be used as an alternative to natural venting where sprinkler protection is provided.

Related to Mechanical extraction

  • Mechanical Completion means that (a) all components and systems of the Project have been properly constructed, installed and functionally tested according to EPC Contract requirements in a safe and prudent manner that does not void any equipment or system warranties or violate any permits, approvals or Laws; (b) the Project is ready for testing and commissioning, as applicable; (c) Seller has provided written acceptance to the EPC Contractor of mechanical completion as that term is specifically defined in the EPC Contract.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Extraction means a process by which cannabinoids are separated from cannabis plant material through chemical or physical means.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Fabrication means making up data or results and recording or reporting them.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • The Works/Project means the works to be executed or done under this contract.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Taximeter means any device for calculating the fare to be charged in respect of any journey in a hackney carriage or private hire vehicle by reference to the distance travelled or time elapsed since the start of the journey, or a combination of both; and

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.