Mechanical Availability definition

Mechanical Availability means the percentage of time that the Facility is capable of producing Energy during a Contract Year and is calculated as follows:[(H x N) - (Sum of downtime hours for N Units)] / (H x N)] x 100 expressed as a percent where H is the number of hours in the Contract Year and N is the number of Units in the Facility. Downtime hours (calculated in 15 minute increments) for each Unit includes all minutes in which the Unit is not in “run” status, or is in “run” status but faulted (including any delay in resetting a fault), with the exception of minutes that a Unit is unavailable due to (i) an event of Force Majeure; (ii) a curtailment ordered by the Transmission Provider; (iii) a NorthWestern Event of Default; and (iv) an outage scheduled at least 90 days in advance with NorthWestern’s written consent, which consent shall not be unreasonably withheld or delayed, up to 240 hours per Unit per Contract Year.
Sample 1
Mechanical Availability measured for each Contract Year, the percentage of time that the Facility is capable of producing Net Energy during a Contract Year. The actual calculation being: Mechanical Availability (%) = (((H * N) – (DH * N))/ (H * N)) * 100 Where: H = number of hours in the Contract Year N = number of generation units comprising the Facility DH = Downtime Hours
Sample 1Sample 2
Mechanical Availability means, for any Rolling Availability Period, the ratio, expressed as a percentage, of (a) the aggregate sum of the number of calendar days during which at least eighty-five percent (85%) of the Solar Panels installed at the Facility were available to generate electricity during such Rolling Availability Period over (b) the total number of calendar days in such Rolling Availability Period; provided that, the Solar Panels installed at the Facility shall be “available” during (a) all Seller Uncontrollable Minutes except for days where Planned Outages result in less than eighty-five percent (85%) of the Solar Panels installed at the Facility being available to generate electricity and (b) periods in which (i) the Facility is unavailable due to a failure of major equipment and (ii) Seller has provided Buyer, within twenty (20) Business Days after such failure, a remediation plan that is reasonably satisfactory to Buyer setting forth how the repair or replacement of such major equipment will be effected.
Sample 1Sample 2

Examples of Mechanical Availability in a sentence

  • For each month the Mechanical Availability Percentage shall be calculated and rounded to the nearest full percentage.

  • The provisions of this Section 4.01 shall be the exclusive remedies of Department for Seller's failure to meet a specific Mechanical Availability Percentage so long as such failure is not due to intentional conduct of Seller.

  • In the event the Facility has failed to meet a seventy percent (70%) Mechanical Availability Percentage, calculated on an annual average basis, in any two (2) out of three (3) years, Department shall have the right, within thirty (30) Days of such time, in its sole discretion, to terminate this Agreement without further obligation or liability to Seller.

  • Department shall not be entitled to any liquidated damages hereunder to the extent that Seller's failure to achieve a specific Mechanical Availability Percentage was caused by (i) Department or any of its agents, contractors, vendors or employees, (ii) an Uncontrollable Force, or (iii) a Delivery Event.

  • Seller guarantees that, as calculated by the thirtieth (30th) Day of each Invoice Month following the Commercial Operation Date, the Facility shall have achieved (a) a Mechanical Availability Percentage of 96% for operations during the months of June, July, August, September, October, December, January and February; and (ii) a Mechanical Availability Percentage of 94% for operations during the months of November, March, April and May.

  • Commencing on the first day of the second Commercial Operation Year and for the reminder of the Term, Seller guarantees that the Facility shall have achieved an average annual Actual Availability Percentage during each Availability Period equal to or greater than ninety percent (90%) for the Term (a “Guaranteed Mechanical Availability Percentage”).

  • Energy payments (inclusive of Integration Charge) to the Seller including any deductions for unpaid Delay Damages, Mechanical Availability Damages or any other xxxxxxxx due Idaho Power will be disbursed within thirty (30) days of the date which Idaho Power receives and accepts the documentation of the monthly Net Energy actually produced by the Seller’s Facility and delivered to Idaho Power as specified in Appendix A.

  • Beginning with the third Contract Year and for each Contract Year thereafter, the Mechanical Availability Guarantee for each Contract Year shall be 0.90, with such annual Availability to be calculated for purposes of this Section 4.3 for each Contract Year.

  • Seller shall pay PacifiCorp liquidated damages under Section 11.4.1 if the Availability in any given Contract Year falls below the Mechanical Availability Guarantee for the Contract Year.

  • Mechanical Availability Damages will be billed to the Seller annually after the end of each Contract Year and Seller shall make payment in full within ten (10) business days of date of the billing.


More Definitions of Mechanical Availability

Mechanical Availability. For each Contract Year, (i) the sum of all hours the Project is available to produce energy, plus customary “deemed available” hours based on Non-Economic Curtailment and limited amounts of planned maintenance, divided by (ii) the total number of hours in such year.
Sample 1
Mechanical Availability means the percentage of time that the Facility is capable of producing Energy during a Contract Year and is calculated as follows: [(H x N) ‐ (Sum of Downtime Hours for N Units)] / (H x N)] x 100 expressed as a percent where H is the number of hours in the Contract Year and N is the number of Units in the Facility. Downtime hours (calculated in 15 minute increments) for each Unit includes all minutes in which the Unit is not in “run” status, or is in “run” status but faulted (including any delay in resetting a fault), with the exception of minutes that a Unit is unavailable due to (i) an event of Force Majeure;
Sample 1
Mechanical Availability means the percentage of time that the Facility is capable of producing Energy during a Contract Year and is calculated as follows:
Sample 1
Mechanical Availability means the percentage of time that the Facility is capable of producing Energy during a Contract Year and is calculated as follows: [(H x N) - (Sum of downtime hours for N Units)] / (H x N)] x 100 expressed as a percent where H is the number of hours in the Contract Year and N is the number of Units in the Facility. Downtime hours (calculated in quarter hour increments) for each Unit includes all minutes in which the Unit is not in “run” status, or is in “run” status but faulted (including any delay in resetting a fault) for the hour, with the exception of any minutes a Unit is unavailable due to (i) an event of Force Majeure; (ii) an Emergency Condition or Force Majeure on the NorthWestern System, the Facility or the Transmission Provider’s System; (iii) a request of the Transmission Provider or Transmission Authority, if any, in accordance with the GIA; (iv) an order of a Governmental Agency, provided that such order is not the result of any negligence or intentional, act or omission on the part of NorthWestern; (v) any restriction imposed upon the delivery of Energy prior to final completion of Network Upgrades; and (vi) a NorthWestern Event of Default; provided that such unavailability shall be excluded from downtime hours only (I) if, with respect to clause (i) only, an event of Force Majeure applied to the Energy Storage System; (II) with respect to (i) only, with respect to the Units that are directly prevented from running by an event of Force Majeure; (III) such unavailability prevents operation of Units in excess of 2 Note to draft: All defined terms and provisions related to shared Master Meter/Project Meter structure continue to be subject to review and approval of NorthWestern Transmission function. the Charge Rate, to the extent of such excess; or (IV) such unavailability occurs or continues at a time when the Energy Storage System is Fully Charged.
Sample 1
Mechanical Availability means the percentage of time that HSM determines the Equipment is available pursuant to Exhibit E for towboats and Exhibit F for barges.
Sample 1

Related to Mechanical Availability

  • Network Availability means the capability of the equipment to resume functions after a remotely initiated trigger has been detected by a network port;

  • System Availability means, with respect to any particular calendar month, the ratio obtained by subtracting Unscheduled Downtime during such month from the Total Monthly Time, and thereafter dividing the difference so obtained by the Total Monthly Time. Represented algebraically, System Availability for any particular calendar month is determined as follows:

  • Required Availability means Excess Availability and unrestricted cash and Cash Equivalents in an amount of not less than $5,000,000.

  • Service Availability The total number of minutes in a calendar quarter that the Tyler Software is capable of receiving, processing, and responding to requests, excluding maintenance windows, Client Error Incidents and Force Majeure.

  • Non-Availability Charges has the meaning set forth in the CAISO Tariff.

  • Average Daily Availability means, as of any date of determination, the average daily Availability for the immediately preceding Fiscal Quarter.

  • Maximum Availability has the meaning set forth in Section 2.1.1.

  • Final Availability Date means the earlier of the Revolving Termination Date and one (1) Business Day prior to the date specified in clause (a) of the definition of Revolving Termination Date.

  • Average Availability means, with respect to any period, the sum of the aggregate amount of Availability for each Business Day in such period (calculated as of the end of each respective Business Day) divided by the number of Business Days in such period.

  • Borrowing Availability means, as of any date of determination, the lesser of (i) the Maximum Amount and (ii) the Borrowing Base, in each case, less the sum of the aggregate Revolving Loan and Swing Line Loan then outstanding.

  • Borrowing Base Availability means, at the time of any determination, an amount equal to the lesser of the Borrowing Base at such time and the aggregate amount of the Commitments at such time.

  • Revolving Availability means Class A Revolving Availability or Class B Revolving Availability, as applicable.

  • Available Flowgate Capability or “AFC” shall mean the rating of the applicable Flowgate less the projected loading across the applicable Flowgate less TRM and CBM. The firm AFC is calculated with only the appropriate Firm Transmission Service reservations (or interchange schedules) in the model, including recognition of all roll-over Transmission Service rights. Non- firm AFC is determined with appropriate firm and non-firm reservations (or interchange schedules) modeled.

  • Excess Availability means, as of any date of determination, the amount equal to Availability minus the aggregate amount, if any, of all trade payables of Borrower and its Subsidiaries aged in excess of historical levels with respect thereto and all book overdrafts of Borrower and its Subsidiaries in excess of historical practices with respect thereto, in each case as determined by Agent in its Permitted Discretion.

  • Availability Block means $15,000,000.

  • Canadian Availability means, at any time, an amount equal to (a) the lesser of (i) the aggregate Canadian Revolving Commitments at such time and (ii) the Canadian Borrowing Base at such time, minus (b) Commitment Reserves established with respect to the Canadian Loan Parties and/or the Canadian Collateral at such time minus (c) the Aggregate Canadian Credit Exposure at such time.

  • Undrawn Availability at a particular date shall mean an amount equal to (a) the lesser of (i) the Formula Amount, or (ii) the Maximum Revolving Advance Amount, minus the Maximum Undrawn Amount of all Letters of Credit, minus (b) the sum of (i) the outstanding amount of Revolving Advances, plus (ii) amounts due and owing to any Borrower’s trade creditors which are outstanding sixty (60) days or more past the due date thereof.

  • Anticipated total county revenue availability means the sum of the:

  • Swing Line Availability has the meaning ascribed to it in Section 1.1(c)(i).

  • Anticipated total county revenue availability per student means the anticipated total county revenue availability for the county divided by the average daily membership of the county.

  • Maximum Available Minutes is the sum of all Deployment Minutes across all Apps deployed by Customer in a given Azure subscription during a billing month.

  • Baseline concentration means that ambient concentration level that exists in the baseline area at the time of the applicable minor source baseline date. A baseline concentration is deter- mined for each pollutant for which a minor source baseline date is estab- lished and shall include:

  • Maximum contaminant level (MCL) means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • Transmission Reliability Margin or “TRM” shall mean the amount of transmission transfer capability necessary to provide reasonable assurance that the interconnected transmission network will be secure. TRM accounts for the inherent uncertainty in system conditions and the need for operating flexibility to ensure reliable system operation as system conditions change.

  • Ramping Capability means the sustained rate of change of generator output, in megawatts per minute.

  • Average Excess Availability means, with respect to any period, the sum of the aggregate amount of Excess Availability for each Business Day in such period (calculated as of the end of each respective Business Day) divided by the number of Business Days in such period.