Measurement Facilities definition

Measurement Facilities means facilities or equipment used to measure the volume and the quality of the Saltwater, which may include meters, isolation valves, recording devices, communication equipment, buildings and barriers.
Measurement Facilities means, collectively, each such Measurement Facility.
Measurement Facilities means the Gathering System or equipment used to measure the volume and quality of the Gas, which may include meter tubes, isolation valves, recording devices, communication equipment, buildings and barriers. CERTAIN INFORMATION IN THIS EXHIBIT HAS BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR SUCH INFORMATION HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN SEPARATELY FILED WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE INFORMATION HAS BEEN MARKED AT THE APPROPRIATE PLACE WITH BRACKETS AND THREE ASTERISKS [***].

Examples of Measurement Facilities in a sentence

  • MEASUREMENT 3.1 Measurement Facilities Transporter, at its sole cost and expense, shall provide for the continued operation and maintenance of gas measuring facilities to be located at the Receipt Points and Delivery Points.

  • Compressor Electricity Measurement Facilities Facilities for the measurement of Compressor Electricity consumed by IUK at Zeebrugge, are those operated by or on behalf of the Belgian electricity transmission system operator and IUK shall have no responsibility for such facilities or any errors or inaccuracies in the readings taken from them.

  • Fuel Gas Measurement Facilities Fuel Gas consumption for compressor operation at Bacton will be measured by IUK.

  • Zeebrugge Measurement Facilities The “Zeebrugge Measurement Facilities” means and includes the facilities owned and operated by Fluxys for measuring the redelivery of Natural Gas at the Zeebrugge Exit Point or the delivery of Natural Gas at the Zeebrugge Entry Point.

  • Zeebrugge Measurement Facilities The “Zeebrugge Measurement Facilities” means and includes the facilities owned and operated by Fluxys for measuring the redelivery of Natural Gas at the Zeebrugge Exit Point or the delivery of Natural Gas f at the Zeebrugge Entry Point.

  • Zeebrugge Measurement Facilities The “Zeebrugge Measurement Facilities” means and includes the facilities owned and operated by Fluxys Belgium for measuring the redelivery of Natural Gas at the Zeebrugge Exit Point or the delivery of Natural Gas at the Zeebrugge Entry Point.

  • The official electronic data from such Measurement Facilities shall remain the property of the Measurement Facilities’ owner, but copies of such records shall, upon written request, be submitted, together with calculations and flow computer configurations therefrom, to the requesting Party for inspection and verification.

  • The official electronic data from such Measurement Facilities or other facilities or equipment shall remain the property of the owner thereof, but copies of such records shall, upon request, be submitted, together with calculations and flow computer configurations therefrom, to the requesting Party for inspection and verification.

  • Such measurement facilities for determining the composition of Gas shall be referred to as the Gas Composition Measurement Facilities.

  • Measurement at the Plant Delivery Points shall be done using continuous samplers (for Measurement Facilities metering less than twenty thousand (20,000) Mcf per Day) and online gas chromatographs (for Measurement Facilities metering twenty thousand (20,000) Mcf or more per Day).


More Definitions of Measurement Facilities

Measurement Facilities means facilities or equipment used to measure the volume and quality of the Crude Oil, which may include meters, isolation valves, recording devices, communication equipment, buildings and barriers.
Measurement Facilities. Any facility or equipment used to measure the volume of Gas, which may include meter tubes, isolation valves, recording devices, communication equipment, buildings and barriers.
Measurement Facilities means facilities or equipment used to measure the volume of Crude Petroleum, which may include meters, valves, recording devices, communication equipment, buildings and barriers.
Measurement Facilities shall have the meaning set forth in Section 9.3.

Related to Measurement Facilities

  • Attachment Facilities means the facilities necessary to physically connect a Customer Facility to the Transmission System or interconnected distribution facilities.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Generating Facilities means Interconnection Customer’s device for the production and/or storage for later injection of electricity identified in the Interconnection Request, but shall not include the Interconnection Customer’s Interconnection Facilities. Generation Interconnection Customer:

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Contingent Facilities means those unbuilt Interconnection Facilities and Network Upgrades upon which the Interconnection Request’s costs, timing, and study findings are dependent and, if delayed or not built, could cause a need for restudies of the Interconnection Request or a reassessment of the Interconnection Facilities and/or Network Upgrades and/or costs and timing.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • New Facilities means facilities for which, by the cut-off date, neither of the following events has occurred:

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Production Facilities (7 9) means "production equipment" and specially designed software therefor integrated into installations for "development" or for one or more phases of "production".

  • Stormwater management facility means a control measure that controls stormwater runoff and changes the characteristics of that runoff including, but not limited to, the quantity and quality, the period of release or the velocity of flow.

  • Interconnection Facilities means the Transmission Owner Interconnection Facilities and the Customer Interconnection Facilities.

  • Replacement Facility means 1 of the following:

  • Wastewater facilities means the structures, equipment, and processes required to collect, carry away, and treat domestic and industrial wastes and dispose of the effluent.

  • Treatment facility means an institution (or distinct part thereof) for the treatment of alcoholism or drug abuse, which meets fully every one of the following tests:

  • Existing Facilities means all existing buildings and other facilities, the sites for the buildings or facilities, and furnishings or equipment for the buildings or facilities located on real property acquired by the building authority under the terms of this act.

  • Continuous monitoring system means the total equipment, required under the emission monitoring section in applicable subsections used to sample and condition (if applicable), to analyze, and to provide a permanent record of emissions or process parameters.

  • Facilities means the Plant and Equipment to be supplied and installed, as well as all the Installation Services to be carried out by the Contractor under the Contract.

  • Generating Facility means the Generating Unit(s) comprising Seller’s power plant, as more particularly described in Section 1.02 and Exhibit B, including all other materials, equipment, systems, structures, features and improvements necessary to produce electric energy and thermal energy, excluding the Site, land rights and interests in land.

  • Exit Facilities means, collectively, the Exit ABL Facility and the Exit Term Loan Facility.

  • Related facilities means any ancillary facilities owned by the Company which are —

  • Common Facilities means the facilities under D.G.sets/D.G.rooms, water storage tanks its pumping and supply system, sewerage & drainage systems, electric sub-station/ transformers/electric panels/distribution network, maintenance service rooms, lawns including lighting & services etc., roads, pathways & driveways including street lighting & services etc., guard posts, fire hydrants & fire fighting system etc. and all such facilities and areas for common use and excluded from the computation of Super Area of the Said Premises;

  • Wastewater treatment facility means a treatment works, as

  • City Facilities means City or publicly-owned structures or equipment located within the right of way or public easement used for governmental purposes.

  • Train Unloading Infrastructure means train unloading infrastructure reasonably required for the unloading of iron ore from the Railway to be processed, or blended with other iron ore, at processing or blending facilities in the vicinity of that train unloading infrastructure and with the resulting iron ore products then loaded on to the Railway for transport (directly or indirectly) to a loading port. Company to obtain prior Ministerial in-principle approval

  • Continuous emission monitoring system or "CEMS" means the equipment required under section 11 of this rule to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen (15) minutes, using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration, as applicable, in a manner consistent with 40 CFR 75*. The following systems are the principal types of continuous emission monitoring systems required under section 11 of this rule:

  • Railroad facilities means right of way and related