Making good definition

Making good means that after completing a repair the council will prepare the surfaces in the area around the repair so they are ready to be redecorated. Usually this is done after there has been a leak.
Sample 1Sample 2Sample 3
Making good means any repair, adjustment, alteration, replacement which may be required to correct a Defect.
Sample 1Sample 2
Making good means reinstatement to the complete satisfaction of the UNDP, through its named focal point.
Sample 1Sample 2

Examples of Making good in a sentence

  • Issue a Certificate of Practical Completion, a Certificate of Making Good Defect and a Final Certificate of Payment as required under the Construction Contract but only after adhering to Item 12 (Mandatory Approval) of this TOR.

  • Uncovering and Making Good - The contractor shall uncover any part of the works and/or make opening in or through the same as the Engineer-in-charge may from time to time direct for his verification and shall reinstate and made good such part to the satisfaction of the Engineer-in-charge.

  • Carry out inspections including practical completion „walk through‟ with the Employer, the Contractor, the community and all other relevant Agencies to determine the dates of Practical Completion and of Making Good Defects.

  • Removal and Making Good of Temporary Works, etc, on Completion The Contractor shall remove (except where specifically stated otherwise) all temporary works, roads, services and the like used for this contract and shall make good to the entire satisfaction of the Principal Agent any damage resulting therefrom.

  • Bartlett, Making Good on Good Intentions: The Critical Role of Motivation in Reducing Implicit Workplace Discrimination, 95 VA.

  • If the Supplier in terms of Sub-Clause 11.1 [Making Good] hereof at the discretion of the Purchaser’s Representative repairs or replaces any part of the Goods, the provisions of Sub-Clause 11.1 hereof shall apply to such repairs or replacements from the date so repaired or replaced.

  • Carry out inspections including practical completion ‘walk through’ with the Employer, the Contractor, the community and all other relevant Agencies to determine the dates of Practical Completion and of Making Good Defects.

  • B2.5.3 Making Good of Damaged Coating Where the protective coating on a steel conduit or trunking has been damaged after installation, such surface shall be effectively restored by at least two coats of anti-rust paint or other suitable coating to prevent corrosion.SECTION B3 INSTALLATION OF POWER CABLES, CABLE TRAYS AND CABLE LADDERS B3.1 GENERAL B3.1.1 Scope This Section covers the installation of power cable, which includes those listed in Clause C3.2 of Section C3.

  • I am an accredited commissioner under the Making Good Decisions programme with Ministry for the Environment.

  • I am a full member of the New Zealand Planning Institute and an accredited decision-maker under the Making Good Decisions programme.


More Definitions of Making good

Making good and derivatives thereof, means, as applicable, repairing, restoring, refurbishing, rehabilitating, removing and replacing or performing filling
Sample 1
Making good. Means carry out any local remedial works, including the following as appropriate and necessary to leave the work sound and neat to approval at the end of each day.
Sample 1
Making good and derivatives thereof, means, as applicable, repairing, restoring, refurbishing, rehabilitating, removing and replacing or performing filling operation on: (a) the Project Work as required under the Agreement; or (b) any existing components disturbed (including Existing Infrastructure) due to the Project Work, to at least the condition existing at the commencement of the Project Work, in terms of construction integrity, finishes, alignment with existing adjoining surfaces, compatibility of materials and sound attenuation.
Sample 1
Making good. Sense: Drawing and Verifying Conclusions (Chapter 10, pp. 245-262). Qualitative Data Analysis: An Expanded Sourcebook (2nd ed.,). Thousand Oaks: Sage. Xxxxx, Xxxxx X; Xxxxxxxxxxx, Xxxxxxx X. (2011) Beyond Constant Comparison Qualitative Data Analysis: Using NVivo Psychology Quarterly 26(1), 70–84. Thus, cross-case analysis (Xxxxx & Xxxxxxxx, 1994) is necessary to establish generalisations and for theoretical elaboration. Nowadays in order to look for interactions and relationships software tools are indispensable. CAQDAS is the acronym we use for Computer Assisted Qualitative Data Analysis Software. Two software are the most popular employed in social research:  Atlas.ti (xxx.xxxxxxx.xxx)  NVivo (xxxxx://xxx.xxxxxxxxxxxxxxxx.xxx/nvivo/home) Next step for qualitative analysis is Conceptualisation. It is a final step of qualitative analysis. An outcome necessary for theoretical development. Xxxxxxx (2011, 111) defines conceptualisation as “abstractions that have more meaning to life outside the study” (…) When the concepts of your study have been developed from your codes, categories, and/or themes, they become material for the potential construction of theory “. Finally, theorisation is the most complicated level of analysis. A theory “(as it is traditionally conceived): predicts and controls action through an if/then logic, explains how and/or why something happens by stating its cause(s), provides insights and guidance for improving social life” (Xxxxxxx, 2011, 114).
Sample 1
Making good means all making good, fitting, facing up, plastering, paving, repairing, and painting to match and jointing to the remaining existing work.
Sample 1
Making good means that after completing a repair the council will also prepare the surface immediately around the repair so that it is ready to be decorated, for example after there has been a leak, or where a component has been replaced.
Sample 1

Related to Making good

  • Nonconforming Goods means only the following: (i) product shipped is different than identified in Buyer's purchase order; or (ii) product's label or packaging incorrectly identifies its contents.

  • M2M Flowgate means Flowgates where constraints are jointly monitored and coordinated as defined and set forth in Schedule D to this Agreement.

  • Earnout Amount has the meaning set forth in Section 2.5.1b).

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."

  • Investment Strategy Modification means with respect to an Investment Strategy, the Portfolio Administrator makes operational adjustments to the Investment Strategy to ensure that, so far as possible, the basic principles and economic effect of the Investment Strategy are maintained or any material modification to the Investment Strategy or its implementation by the Portfolio Administrator.

  • LWDA PAGA Payment means the 75% of the PAGA Penalties paid to the LWDA under Labor Code section 2699, subd. (i).

  • Test Strategy means a strategy for the conduct of Testing as described further in paragraph 3 of schedule 4;

  • Closing Date Cash has the meaning specified in Section 3.4(a).

  • originating goods means goods that qualify as originating in accordance with the relevant provisions of Chapter 4;

  • Investment Strategy is the processes and policies implemented by the Investment Manager for pursuing a particular investment objective managed by an Investment Team.

  • Earnout Consideration has the meaning set forth in Section 2.6 below.

  • Hammer Price means the level of bidding reached (at or above any reserve) when the auctioneer brings down the hammer;

  • Supply Chain means the individuals and organisations who will be responsible for any of the design and/or construction of the Works as set out in the Schedule of Supply Chain Members;

  • Base Working Capital means $25,000,000.

  • AHYDO Catch-Up Payment means any payment, including payments made on subordinated debt obligations, in each case to the extent such payment is necessary to avoid the application of Section 163(e)(5) of the Code.

  • Final Acceptance Certificate “– shall mean ISR's issuance of a signed Final Acceptance Certificate in the form attached hereto as Appendix D.

  • Extended Summer Resource Price Adder means, for Delivery Years through May 31, 2018, an addition to the marginal value of Unforced Capacity as necessary to reflect the price of Annual Resources and Extended Summer Demand Resources required to meet the applicable Minimum Extended Summer Resource Requirement.

  • Single coat means one film coating applied to a metal surface.

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Grenfell Tower support payment means a payment made to a person because that person was affected by the fire on 14th June 2017 at Grenfell Tower, or a payment to the personal representative of such a person—

  • Earnout Payment has the meaning set forth in Section 2.3(b).

  • Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4- character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

  • Investment Start Date : means 22 July 2022 or if such day is not a Scheduled Trading Day, the following day which is a Scheduled Trading Day.

  • Closing Date Working Capital has the meaning specified in Section 2.3(b).

  • TLR means the NERC Transmission Loading Relief Procedures used in the Eastern Interconnection as specified in NERC Operating Policies.

  • Earn-Out Amount has the meaning set forth in Section 2.07(a).