Loss Factors definition

Loss Factors means the factors which need to be applied to the electricity measured or calculated as having been delivered to ICPs, in order to apportion Losses and determine the electricity for which the Retailer is responsible for purchasing at the Network Supply Points;
Sample 1Sample 2
Loss Factors means the product, expressed as a percentage, of the transmission loss factor (set by AEMO or estimated by us) and the distribution loss factor (set by Your Distributor or estimated by us), which affect any additional amounts payable in relation to electricity that is lost through the transmission and Distribution Systems on the way to the Supply Address.
Sample 1
Loss Factors means the factor by which Electricity metered at each Injection Point is adjusted to determine the quantity of Electricity that has passed through the Grid Exit Point, with the Loss Factor determined from time to time by the Distributor in accordance with Common Industry Practice.;
Sample 1

Examples of Loss Factors in a sentence

  • If, at any time, the Retailer considers that one or more Loss Factors notified by the Distributor are not appropriate, or that the methodology or information used to calculate the Loss Factor is incorrect, the Retailer may make a written complaint to the Distributor.

  • A notice provided to the Retailer in accordance with clause 7.3 will include details of the methodology and information used by the Distributor to determine the Loss Factors.

  • The Distributor will consider the complaint in good faith, and may change the Loss Factors declared in its notice to reflect the Retailer's concerns in accordance with clause 7.3. The Distributor will decide whether to make the change and, if applicable, give notice under clause 7.3, no later than 20 Working Days after receipt of the complaint.

  • If the Distributor does not change its notice after having received a complaint from the Retailer, the Retailer may raise a Dispute with the Distributor for the Loss Factors to be determined in accordance with the Dispute resolution process in clause 25.

  • If the outcome of the Dispute is that the Distributor changes the Loss Factors declared in the Distributor's notice, and the change leads to a change in the level of revenue received by the Distributor, the Distributor may determine the time from which the change is to apply, which will be no later than 60 Working Days from the date on which the Dispute is finally resolved.

  • If the Distributor wishes to change one or more Loss Category codes or Loss Factors, the Distributor will give the Retailer at least 40 Working Days' notice of the proposed change (including the reasons for the proposed change).

  • Subject to clause 7.6, the Distributor will calculate Loss Factors in accordance with the Loss Factor Guidelines.

  • The Retailer will provide the Distributor with any additional information that the Distributor may reasonably require to enable the Distributor to calculate Loss Factors within 15 Working Days of the request from the Distributor.

  • A notice provided to the Trader in accordance with clause 6.3 must include details of the methodology and information used by the Distributor to determine the Loss Factors.

  • The Distributor must calculate Loss Factors in accordance with the requirements of the Code relating to Loss Factors (if any).


More Definitions of Loss Factors

Loss Factors means the agreed loss factors for ingredients and packaging for each Product size and configuration as identified on Schedule 6.1 hereto. For new Product sizes and case configurations, Customer and Ventura will reasonably negotiate appropriate Loss Factors.
Sample 1
Loss Factors means the factor(s) expressed as 1.XXXX to be applied to the electricity measured or estimated as having been delivered to an ICP (or NSP for an embedded network) in order to allocate a share of the expected Losses within the network to that ICP, such loss factor(s) to be determined by the Distributor and published from time to time;
Sample 1
Loss Factors means a factor which is approved by the relevant jurisdictional regulator and takes into consideration electrical energy losses incurred in transmitting and distributing electricity over a network.
Sample 1Sample 2

Related to Loss Factors

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Technique factors means the following conditions of operation:

  • Leakage technique factors means the technique factors associated with the diagnostic or therapeutic source assembly which are used in measuring leakage radiation. They are defined as follows:

  • Sustainability Factors means environmental, social and employee matters, respect for human rights, anti‐corruption and anti‐bribery matters.

  • Dilution Factors means, without duplication, with respect to any period, the aggregate amount of all deductions, credit memos, returns, adjustments, allowances, bad debt write-offs and other non-cash credits which are recorded to reduce accounts receivable in a manner consistent with current and historical accounting practices of the Borrower.

  • Stress Factor means 2.25.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Average Monthly Limit means the maximum allowable "Average Monthly Concentration" as defined in Section 22a-430-3(a) of the RCSA when expressed as a concentration (e.g. mg/l); otherwise, it means "Average Monthly Discharge Limitation" as defined in Section 22a-430-3(a) of the RCSA.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.

  • Performance Factors means any of the factors selected by the Committee and specified in an Award Agreement, from among the following objective measures, either individually, alternatively or in any combination, applied to the Company as a whole or any business unit or Subsidiary, either individually, alternatively, or in any combination, on a GAAP or non-GAAP basis, and measured, to the extent applicable on an absolute basis or relative to a pre-established target, to determine whether the performance goals established by the Committee with respect to applicable Awards have been satisfied:

  • Inflation Factor means a number determined for each tax year by dividing the consumer price index for June of the tax year by the consumer price index for June 2005.

  • average consumption means the average consumption of a customer of a municipal service during a specific period, and is calculated by dividing the total measured consumption of that municipal service by that customer over the preceding three months by three;

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Required Reserve Factor Floor means, for any Calculation Period, the sum (expressed as a percentage) of (a) 12.5% plus (b) the product of the Adjusted Dilution Ratio and the Dilution Horizon Ratio, in each case, as of the most recent Cut-Off Date.

  • Average monthly discharge limitation means the highest allowable average of "daily discharges" over a calendar month, calculated as the sum of all "daily discharges" measured during a calendar month divided by the number of "daily discharges" measured during that month. Compliance with fecal coliform bacteria or E coli bacteria limitations shall be determined using the geometric mean.

  • Net weight means the weight of the goods themselves without packing materials and packing containers of any kind;

  • Disinfection profile means a summary of Giardia lamblia inactivation through the treatment plant.

  • Applicable Measurement Period means the most recently completed four consecutive fiscal quarters of the Issuer immediately preceding the Applicable Calculation Date for which internal financial statements are available.

  • Weighting with respect to an Underlying means the weighting in relation to the relevant Underlying as specified in the table in the definition of such Underlying.

  • reasonable measures means appropriate measures which are commensurate with the money laundering or terrorism financing risks;

  • Applicable Mortality Table means the 1983 Group Annuity Mortality Table; and

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Intrinsic Loss Estimate means total losses under the shared loss agreements in the amount of One hundred Sixty-eight million dollars ($168,000,000.00).

  • SF1-4 Intrinsic Loss Estimate means total losses under this Single Family Shared-Loss Agreement in the amount of eighteen million dollars ($18,000,000.00).