Local Control Center, Metering and Telemetry Sample Clauses

Local Control Center, Metering and Telemetry. The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.
Sample 1Sample 2Sample 3See All (77)
AutoNDA by SimpleDocs
Local Control Center, Metering and Telemetry. Each Transmission Owner shall operate, or arrange for a suitable third party to operate, on a twenty-four (24) hour basis, a suitable control center, and shall install and maintain all other equipment and facilities reasonably required for the ISO to exercise Operational Control over Transmission Facilities Under ISO Operational Control. Operation of the NYS Power System will be a cooperative effort coordinated by the ISO control center in conjunction with each Transmission Owner's control center and will require the exchange of all reasonably necessary information. The Transmissions Owners’ control centers must provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 as well as on certain generation resources in their Transmission Districts. Each Transmission Owner shall have the responsibility for providing metering data in its Transmission District to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. Each Transmission Owner shall be responsible for collecting and making available to the ISO billing quality metering data and any other information for the Transmission District required by the ISO for billing purposes. The Parties agree that the metering and data acquisition systems currently in place will be acceptable for initial ISO operation. The Transmission Owner shall cooperate with the ISO in implementing reasonable metering enhancements and new metering installations that the ISO may deem necessary, provided that mechanisms satisfactory to each Transmission Owner are in place for their recovery of all associated costs. Each Transmission Owner shall continue to receive telemetry from existing Generators in its Transmission District and provide for the receipt of such information from new Generators. Automatic Generation Control (“AGC”) will be implemented via each Transmission Owner’s control center. Each Transmission Owner shall operate its control center to comply with current AGC procedures, as well as any revised or new AGC procedures reasonably adopted by the ISO. In addition, each Transmission Owner shall provide backup control services to the ISO in the event the ISO’s computer systems malfunction. In such situations, Bid curves will be made available to the Transmission Owners’ control centers to facilitate the continued economic operation of the system. Each Transmission Owner will maintain a strict Code of...
Sample 1Sample 2Sample 3See All (57)
Local Control Center, Metering and Telemetry. The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. The NTO shall maintain the local control center(s), as well as suitable backup operations, consistent with the Reliability Rules and all other applicable reliability rules, standards and criteria to permit the ISO, as the Transmission Operator, to meet its obligations. All NTO system operators in real- time communication with the ISO or responsible for directing real-time actions on NTO Transmission Facilities Under ISO Operational Control shall be required to maintain a NERC Transmission Operator or Reliability Operator certificate. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO withmaintain Supervisory Control and Data Acquisition (“SCADA”) systems and provide the ISO with SCADA information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.
Sample 1
Local Control Center, Metering and Telemetry. The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO Service Agreement No. 2771 to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.
Sample 1

Related to Local Control Center, Metering and Telemetry

  • Interconnection 2.1.10 Startup Testing and Commissioning

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Access Control Supplier will maintain an appropriate access control policy that is designed to restrict access to Accenture Data and Supplier assets to authorized Personnel. Supplier will require that all accounts have complex passwords that contain letters, numbers, and special characters, be changed at least every 90 days, and have a minimum length of 8 characters.

  • Review Systems; Personnel It will maintain business process management and/or other systems necessary to ensure that it can perform each Test and, on execution of this Agreement, will load each Test into these systems. The Asset Representations Reviewer will ensure that these systems allow for each Review Receivable and the related Review Materials to be individually tracked and stored as contemplated by this Agreement. The Asset Representations Reviewer will maintain adequate staff that is properly trained to conduct Reviews as required by this Agreement.

  • Infrastructure (a) The Borrower has and will maintain a sufficient infrastructure to conduct its business as presently conducted and as contemplated to be conducted following its execution of this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.