ISO Conditions definition

ISO Conditions means 59 degrees Fahrenheit and 60% relative humidity and the associated Site standard barometric pressure at the Site elevation of ___feet above mean sea level.
Sample 1Sample 2Sample 3
ISO Conditions means ambient temperature of 15° Celsius, relative humidity 60% and ambient pressure of 1 bar;
Sample 1Sample 2Sample 3
ISO Conditions means the International Organization for Standardization conditions used by the gas turbine industry, which are 59ºF, 14.7 pounds per square inch absolute and 60% relative humidity;
Sample 1Sample 2Sample 3

Examples of ISO Conditions in a sentence

  • Part Load Efficiency at ISO Conditions, Capstone C65 5–8Figure 5-4.

  • After each test, the Seller will use performance curves certified by the original equipment manufacturer/architect engineer/vendor to adjust the test results to ISO Conditions.

  • If data required pursuant to Section 3.7(g) is not provided by Seller in a format accepted by Buyer or is not provided to Buyer in the timeline specified herein, Buyer will use the Guaranteed Heat Rate Point for ISO Conditions [for the applicable Configuration] as specified in Appendix II for the purposes of the Gas True-up Payment and Emissions Quantity calculations.

  • The Tested Capacity of the Units will be the arithmetic average of the results of the six corrected Test Periods adjusted to ISO Conditions.

  • Estimated Thermal Unit Performance at ISO Conditions Other operating characteristics for the natural gas generation resources include ramp rate, minimum run times and minimum down times, and startup times.


More Definitions of ISO Conditions

ISO Conditions means 59 degrees Fahrenheit and 60% relative humidity and the associated Site standard barometric pressure at the Site elevation of feet above mean sea level.
Sample 1Sample 2
ISO Conditions means the reference temperature, humidity and pressure conditions established by the International Standards Organization.
Sample 1Sample 2
ISO Conditions has the meaning set forth in Attachment T.
Sample 1Sample 2
ISO Conditions means International Standards Organization conditions. For combustion turbines (CT’s) this is a reference state of 288 degrees K ambient temperature, 60 percent relative humidity and 101.3 kilopascals barometric pressure. This is equal to atmospheric pressure sea level 14.7 psia, 59 degrees Fahrenheit and 60 percent RH.
Sample 1
ISO Conditions has the meaning set forth in Section 2.7(a)(1).
Sample 1
ISO Conditions means 288.15 Kelvin, or 15 degrees Celsius, 60 percent relative humidity, and 101.3 kilopascals pressure.
Sample 1
ISO Conditions are defined as 59 degrees Fahrenheit ambient temperature, sea level and 60 percent (%) relative humidity.
Sample 1