Insulation definition

Insulation means non-conducting material enclosing or surrounding a conductor or any part thereof and of such quality and thickness as to withstand the operating voltage of the equipment;

Insulation means, for purposes of this rule, any material used primarily to retard or to resist heat flow, whether mineral or organic, fibrous, cellular or reflective, or in rigid, semi-rigid, flexible or loose-fill form.

Insulation means a material primarily designed to resist heat flow and which is installed between conditioned areas of a building and the unconditioned areas of the building or the outside or is installed on heating or cooling ducts or pipes or is wrapped around the exterior casing of a domestic water heater.

Examples of Insulation in a sentence

• Batt thermal Insulation for exterior walls of the building shall be mineral or glass fiber conforming to federal specifications HH-I-S21 and ASTM C665.

• Basic Tools: Tape measure; knife; bull nips; scissors Secondary Tools - Insulation Workers employed in the trade longer than three (3) months: Pointing trowel; tin snips, aviation snips - left, right and straight; keyhole or compass saw; rubber bands or springs; chalk box with chalk; mallet or beater; paste brush; tool kit or bag pouch; dividers; punch or awl; screwdrivers; paltry lacing needle (hook); mitre chart; flat trowel; hand saw; large rubber gloves.

• Insulation Fiberglass, resin-hardened-honeycomb (FRP) material, polyurethane, or closed cell EPS foam insulation in walls and ceiling (minimum R-value of R-6).

• NOT COVERED: Insulation; asbestos covered ductwork; registers; grills; dampers; improperly sized ductwork; diagnostic testing of, or locating leaks to ductwork, including as required by any law, regulation, ordinance or code or when required due to the installation or replacement of system equipment; ductwork outside the perimeter of the home or crawl space; collapsed or crushed ductwork; ductwork damaged by moisture or rodents.

• Insulation in walls and ceiling shall be fiberglass, resin-hardened honeycomb (FRP) material, polyurethane, or closed cell EPS foam.

More Definitions of Insulation

Insulation means a material or system that is specifically and primarily designed

Insulation means non-conducting material enclosing, surrounding or supporting a conductor and suitable for the purposes of these Regulations;

Insulation means a material or system that is specifically and primarily designed to reduce the heat loss or gain of a dwelling unit when installed in or on the dwelling unit.

Insulation means non-conducting material enclosing, surrounding or supporting a conductor or any part thereof and of such quality and thickness as to be suitable for the purposes of the regulation in which the term is used, and cognate expressions shall be construed accordingly;

Insulation means non-conducting material enclosing, surrounding or supporting a conductor or any part thereof and of such quality and thickness as to be suitable for the purposes of the Regulation in which the term is used;

Insulation. (9) is applied to the components of a rocket motor, i.e. the case, nozzle, inlets, case closures, and includes cured or semi-cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps.

Insulation means a suitable non-conducting material enclosing, surrounding or supporting a conductor;