Installed Capability definition

Installed Capability of an electric generating unit or combination of units during the Winter Period is the Winter Capability of such unit or units and during the Summer Period is the Summer Capability of such unit or units.
Sample 1Sample 2Sample 3
Installed Capability or "ICAP" means the maximum claimed capability (as defined in the Restated NEPOOL Agreement) of a generating facility, expressed in kilowatts, subject to capability audits, exclusive of the capacity required by such facility for its own use.
Sample 1Sample 2
Installed Capability means the actual capability of the Providing Unit to provide Synchronous Inertia and, inherently Short-Circuit Contribution, to the Power System in accordance with this Agreement (as expressed in MVA.s);
Sample 1Sample 2

Examples of Installed Capability in a sentence

  • Installed Capability, Operable Capability and Energy are as defined in the Restated NEPOOL Agreement.

  • The Providing Unit shall consist of a [type of facility] facility, named [name of facility], with Expected Installed Capability of [amount of MVA.s] MVA.s and located at [facility location].10 10 Note to Draft: Project specific details to be inserted.

  • For the avoidance of doubt, the Contracted Maximum Available Volume shall only be so adjusted if the Installed Capability of the Providing Unit is less than the Contracted Maximum Available Volume following Provisional Acceptance / Completion of Performance Testing.

  • Seller shall be responsible for all current and future requirements of NEPOOL and the ISO and associated costs of ancillary services, Installed Capability, Energy, Operating Reserves, Automatic Generation Control, losses, uplift costs, congestion charges (to the extent such charges are not imposed on Narragansett as a transmission charge by NEPOOL or the ISO) and all other requirements, market products, expenses and charges imposed by NEPOOL or the ISO that may be in effect from time to time.

  • The Services provided by Seller pursuant to the Agreement will be initially represented within the NEPOOL Market System as: 735 NECO Last Resort Service Load As soon as possible after the execution of this Agreement and before the Commencement Date, Narragansett shall enter into the NEPOOL Market System Load Asset Contracts for Electrical Load and Installed Capability for Load Assets 735 (the "Load Asset Contracts").


More Definitions of Installed Capability

Installed Capability means the sum of the actual Dmax capability of the Energy Storage Facility, not to exceed [Dmax capability expressed in MW AC].
Sample 1
Installed Capability. The Winter Net Capability during the Winter Period and the Summer Net Capability during the Summer Period.
Sample 1
Installed Capability. ENTITLEMENT is (a) the right to all or a portion of the Installed Capability of a generating unit or units to which an Entity is entitled as an owner (either sole or in common) or as a purchaser pursuant to a Unit Contract, (b) REDUCED BY any portion thereof which such Entity is selling pursuant to a Unit Contract, and
Sample 1
Installed Capability. RESPONSIBILITY * of a Participant for any month is the number of Kilowatts determined in accordance with Section
Sample 1

Related to Installed Capability

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Nominal Rated Capability means the nominal maximum rated capability in megawatts of a Transmission Interconnection Customer’s Customer Facility or the nominal increase in transmission capability in megawatts of the Transmission System resulting from the interconnection or addition of a Transmission Interconnection Customer’s Customer Facility, as determined in accordance with pertinent Applicable Standards and specified in the Interconnection Service Agreement.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Ramping Capability means the sustained rate of change of generator output, in megawatts per minute.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Alternate Fuel Capability means a situation where an alternate fuel could have been utilized whether or not the facilities for such use have actually been installed; provided however, where the use of natural gas is for plant protection, feedstock or process uses and the only alternate fuel is propane or other gaseous fuel, then the Buyer will be treated as if he had no alternate fuel capability.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Available Flowgate Capability or “AFC” shall mean the rating of the applicable Flowgate less the projected loading across the applicable Flowgate less TRM and CBM. The firm AFC is calculated with only the appropriate Firm Transmission Service reservations (or interchange schedules) in the model, including recognition of all roll-over Transmission Service rights. Non- firm AFC is determined with appropriate firm and non-firm reservations (or interchange schedules) modeled.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Antenna means communications equipment that transmits or receives electromagnetic radio frequency signals used in the provision of wireless services.

  • Building system means plans, specifications and documentation for a system of manufactured factory-built structures or buildings or for a type or a system of building components, including but not limited to: structural, electrical, mechanical, fire protection, or plumbing systems, and including such variations thereof as are specifically permitted by regulation, and which variations are submitted as part of the building system or amendment thereof.

  • Plumbing system means water supply distribution and disposal piping on the premises, including appliances and equipment attached thereto, between their connection points to a public or private system.

  • Installed means attached or connected such that an item requires tools for removal.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Telecommunications Equipment means equipment, other than Customer Premises Equipment, used by a Carrier to provide Telecommunications Services, and include software integral to such equipment, including upgrades.