Installation Control Point definition

Installation Control Point. (ICP) means a Point of Connection on the Distributor’s Network, which the Distributor nominates as the point at which a Retailer is deemed to supply electricity to a Consumer, and has the attributes set out in the Code.
Sample 1Sample 2Sample 3
Installation Control Point. ("ICP") means a point which the Distributor nominates as the point at which a Retailer is deemed to supply electricity to a Consumer, and has the attributes set out in the Code;
Sample 1Sample 2Sample 3
Installation Control Point means a point which the Distributor nominates as the point at which a Retailer is deemed to supply electricity to a Consumer, and has the attributes set out in the Rules;
Sample 1Sample 2

Examples of Installation Control Point in a sentence

  • A statement of this policy will be part of the bidding documents for the Project.

  • If such information is later found to be inaccurate, WEL may review and revise the connection charge in accordance with clause 14.3. Where a connection has been deemed standard, WEL has assumed that an Installation Control Point (ICP) will be allocated for the connection within a year of the quoted works being completed.

  • The tariff is based upon charges applied at each premise Installation Control Point (ICP) as measured by the electricity meters installed there.

  • We have updated ENZ with the latest oil, fossil gas, coal and biomass consumption and supply statistics from the Energy Balance Table, and electricity generation and consumption (including Installation Control Point (ICP) numbers) data from the Electricity Statistics Table.

  • An Installation Control Point (ICP) methodology is used for the Eastern Region.

  • The gas retail market requires a record to be kept that identifies the retailer responsible for each Installation Control Point (“ICP”).

  • In practice: • BEL’s line charges are paid by electricity retailers operating in the Buller network region, using, inter alia, the load group aggregate metering information supplied by these retailers for each consumer Installation Control Point (ICP); and• In deriving their retail tariff, retailers may repackage BEL’s lines charges together with their own retail energy charges, or separately disclose line charges.

  • As far as attitude towards women’s rights are concerned, aspiring migrants have more gender-egalitarian views in the age group 15-30, when they are single women, or when they originate from countries with a Sunni minority.

  • The Otago Region (as highlighted below) uses a Grid Exit Point (GXP) methodology which can be considered a wholesale delivery model and the Lakeland Region uses an Installation Control Point (ICP) methodology which can be considered a retail delivery model.

  • These are: • Inefficient information exchange processes; • Incomplete access by retailers to key Installation Control Point (“ICP”) data; • Lack of rules for updating ICP data; • Discrepancies in information; • Lack of compatibility between systems; • Lack of a governance structure to support and enforce compliance and resolve complaints; and • No linkage with allocation and reconciliation processes.


More Definitions of Installation Control Point

Installation Control Point. (“ICP”) means a Point of Connection on a Distributor’s Network, which the Distributor nominates as the point at which a Retailer is deemed to supply electricity to a Consumer, and has the attributes set out in schedule 8 of MARIA;
Sample 1
Installation Control Point. (“ICP”) means a point that the Distributor nominates as the point at which a Retailer is deemed to supply electricity to a Consumer, and has the attributes set out in the Rules;
Sample 1
Installation Control Point. ” ("“ICP"”) means a pPoint of Connection which the Distributor nominates for the purposes of the Rules as the point at which a Retailer is deemed to supply electricity to a Consumer, and has the attributes set out in the Rules;
Sample 1

Related to Installation Control Point

  • Service Control Point (SCP) is the node in the common channel signaling network that accepts Queries for certain Database services. The SCP is a real time database system that receives Queries from service platforms, performs subscriber or application-specific service logic, and then sends a Response back to the Query-originating platform. Such service platforms can be Service Switching Points (SSPs) or other network nodes capable of properly formatting and launching Queries.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Installation Site means the site at which the Product is originally installed.

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region. On-Site Generators:

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • Installation Charges means those Charges set out in the Order in relation to installation of the Service and/or any Purchased Equipment, Customer Equipment and/or BT Equipment as applicable.

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Critical control point means a point, step, or procedure in a food proc- ess at which control can be applied, and a food safety hazard can as a result be prevented, eliminated, or reduced to acceptable levels.

  • Air navigation facility means any facility, other than one owned and operated by the United States, used in, available for use in, or designed for use in aid of air navigation, including any structures, mechanisms, lights, beacons, markers, communicating systems, or other instrumentalities or devices used or useful as an aid, or constituting an advantage or convenience to the safe taking off, navigation, and landing of aircraft, or the safe and efficient operation or maintenance of an airport, and any combination of any or all of such facilities.

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Generation Interconnection Facilities Study means a Facilities Study related to a Generation Interconnection Request.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Electrical Interconnection Facilities means the equipment and facilities required to safely and reliably interconnect a Facility to the transmission system of the Transmitting Utility, including the collection system between each Bloom System, transformers and all switching, metering, communications, control and safety equipment, including the facilities described in any applicable Interconnection Agreement.

  • Interconnection Facilities means the Transmission Owner Interconnection Facilities and the Customer Interconnection Facilities.

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Electrical work Concealed and fire resistant wiring of “ISI” Copper Wire, Distribution board with “MCB”. “ISI” xxxx modular electrical accessories, Landline phone conduit, Cable TV wiring conduit, Separate line for inverter connection, Air-conditioner power point. Painting : Long Lasting and weather resistant acrylic paint to all external walls, All internal walls with white cement based putty finish with OBD. Plumbing & Sanitation : Sanitary xxxx for toilets, plumbing fixtures, CPVC/UPVC pipe and fitting(ISI make), SWR drainage system. Kitchen: Granite platform, ceramic tiles dado upto 2’ height, Stainless Steel sink in Kitchen, Aquaguard point, Connection for washing machine in wash area.

  • Electrical contractor means an electrical contractor as defined in the Regulations;

  • Control Area(s) means an electric power system or combination of electric power systems to which a common automatic generation control scheme is applied.

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.

  • Terminal Equipment means all telephone instruments, including pay telephone equipment, the common equipment of large and small key and PBX systems and other devices and apparatus, and associated wirings, which are intended to be connected electrically, acoustically or inductively to the telecommunication system of the telephone utility.