Inspection Criteria definition

Inspection Criteria means the re- jection and acceptance numbers associ- ated with a particular sampling plan.
Sample 1Sample 2Sample 3
Inspection Criteria means the pass and fail numbers associated with a par- ticular sampling plan.
Sample 1Sample 2Sample 3
Inspection Criteria means the pass and fail numbers associated with a particular sampling plan.
Sample 1Sample 2Sample 3

Examples of Inspection Criteria in a sentence

  • Testing Conditions and Inspection Criteria For the final test the testing sample must be stored at room temperature for 24 hours, after the tests listed in Table 11-1, Standard specifications for Reliability have been executed in order to ensure stability.

  • Inspection Criteria of Premises visit is Mandatory, the company which will qualify this criterion will be eligible for technical evaluation.

  • Delete Sec 724.3.5.1 in its entirety: 08/13 Delete Sec 724.3.6 renumber and substitute the following renumbering subsequent sections accordingly: 08/13 724.3.7 Inspection Criteria.

  • Sampling Requirements:Sampling inspection is allowed except for Mandatory Inspection Criteria (MIC’s) and Key Characteristics (KCs) noted on the engineering definition or if otherwise specified in the GKN purchase order, engineering definition and/or Special Manufacturing Instructions (SMI).

  • Testing Conditions and Inspection Criteria For the final test the testing sample must be stored at room temperature for 24 hours, after the tests listed in Table 12.2, Standard specifications for Reliability have been executed in order to ensure stability.

  • Testing Conditions and Inspection Criteria For the final test the testing sample must be stored at room temperature for 24 hours, after the tests listed in Table 11.2, Standard specifications for Reliability have been executed in order to ensure stability.

  • FAA Structural Management and Inspection Criteria for use on Large Airtankers for USDA & DOI, 28 May 2004.

  • Refer to Section 4 of contract for list of contracted tasks.Failure of the Contractor to complete contract tasks, or to complete frequency of task or to an acceptable level of outlined on the QASP Inspection Criteria in Section 5 of contract.Periodic CleaningFrequency of cleaning.

  • For humidity test, DI water should be used.Inspection Standard: Inspect after 1-2hrs storage at room temperature, the sample shall be free from the following defects:⚫ Air bubble in the LCD⚫ Seal Leakage⚫ Non-display⚫ Missing Segment⚫ Glass Crack⚫ IDD is greater than twice initial value.⚫ Others as per QA Inspection Criteria Note 2.

  • Testing Conditions and Inspection Criteria For the final test the testing sample must be stored at room temperature for 24 hours, after the tests listed in Table 10.2, Standard specifications for Reliability have been executed in order to ensure stability.


More Definitions of Inspection Criteria

Inspection Criteria means engine hardware evaluation criteria as provided by the most current revision of the applicable FJ44 Approved Engine Manual.  ITEMS means the Engine(s), Line Replaceable Units, or Parts and Spare Parts that pertain to the Engine, as well as a specifically identified functional assembly of any of the foregoing which is readily interchangeable as a unit. The parts listed in Annex D are not considered Items.
Sample 1
Inspection Criteria means engine hardware evaluation criteria as provided by the most current revision of the applicable FJ44 Approved Engine Manual.
Sample 1
Inspection Criteria means the passand fail numbers associated with a par- ticular sampling plan.
Sample 1

Related to Inspection Criteria

  • Examination Criteria means the loan classification criteria employed by, or any applicable regulations of, the Assuming Institution’s Chartering Authority at the time such action is taken, as such criteria may be amended from time to time.

  • Evaluation Criteria means the criteria set out under the clause 27 (Evaluation Process) of this Part C, which includes the Qualifying Criteria, Functional Criteria and Price and Preferential Points Assessment.

  • Review Criteria has the meaning assigned to that term in Section 12.02(b)(i).

  • Selection Criteria means and includes all of the requirements, considerations,

  • ASAM criteria means the most current edition of the American Society of Addiction Medicine's published criteria for admission to treatment, continued services, and discharge.

  • Clinical review criteria means the written screening procedures, decision abstracts, clinical protocols, and practice guidelines used by a health carrier to determine the necessity and appropriateness of health care services.

  • Nomination Criteria means the criteria made up of the Over-Riding Nomination Criteria andthe Specific Nomination Factors, and is also referred to as “this Criteria”.

  • Fitch Criteria means the Collateral Amount shall equal the sum of (i) the product of A multiplied by the xxxx-to-market value of the outstanding Transactions determined by Party A in good faith from time to time, and (ii) the product of B multiplied by the current aggregate notional amount of the outstanding Transactions, where:

  • Over-Riding Nomination Criteria means the criteria set out in clause 4.2.

  • Design Criteria means the design criteria set out in the Ministry’s publication “Design Criteria for Sanitary Sewers, Storm Sewers and Forcemains for Alterations Authorized under Environmental Compliance Approval”, (as amended from time to time).

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Functional Criteria means the criteria set out in clause 27 of this Part C.

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Criteria means one of the eight (8) state defined categories to be scored.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Study means the investigation to be conducted in accordance with the Protocol.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Inspection Report means the report delivered by the Master Servicer or the Special Servicer, as the case may be, substantially in the form of Exhibit L hereto.

  • Feasibility Study means the evaluation and analysis of the potential of a project, which aims at supporting the process of decision-making by objectively and rationally uncovering its strengths and weaknesses, opportunities and threats, as well as identifying the resources required to carry it through and ultimately its prospects for success;

  • Screening means the evaluation process used to identify an individual's ability to perform activities of daily living and address health and safety concerns.

  • Phase I Study means a study in humans which provides for the first introduction into humans of a product, conducted in healthy volunteers or patients to obtain information on product safety, tolerability, pharmacological activity or pharmacokinetics, as more fully defined in 21 C.F.R. § 312.21(a) (or the non-United States equivalent thereof).

  • Business Criteria means any one or any combination of Income before Taxes, Net Income, Return on Equity, Return on Assets, Pre-tax Margin, Free Cash Flow, Valuation or EPS.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;