Industry Codes and Standards definition

Industry Codes and Standards means the codes and standards set forth in Exhibit N.
Sample 1Sample 2Sample 3
Industry Codes and Standards means the codes and standards of any technical society, organization or association, or codes and standards of any Governmental Authority: (a) that are set forth or referenced in the DCD and applicable Specifications, or (b) that may otherwise apply to performing the Work in accordance with Good Industry Practices, including the codes and standards referenced in Exhibit N.
Sample 1Sample 2

Examples of Industry Codes and Standards in a sentence

  • It is correct on the Agenda, It’s just not on the documentation that we have before us.

  • If you wish to terminate your contract with Vocus for any reason you must give us 48 hours’ notice (this is a requirement of the Industry Codes and Standards and applicable Regulations).

  • All meter readings will be done in accordance with the Industry Codes and Standards.

  • Industry Codes and Standards require us to read the meters on the property at least once every 4 months.

  • Oliver Hart & Luigi Zingales, Companies Should Maximize Shareholder Welfare Not Market Value, 2 J.L. FIN & ACCT.

  • Accepts the requirement to comply with all relevant national and international legislation, Conventions, Directives, as well as Industry Codes and Standards.

  • However, no credit will be given if we or our representatives determine that the meter has been tampered with.7.3 Industry Codes and Standards require us to read the meters on the property at least once every 4 months.

  • Subject to Article 9, Contractor shall perform and complete its obligations under this Agreement in accordance with applicable Laws, this Agreement, Industry Codes and Standards, and Good Industry Practices.

  • Industry Codes and Standards as Conditions to Licenses to Construct and to Operate.

  • S Patel, C Cohen, LA McLendon, A Husman, S Schmechel, R Busch, K Stevens, A Adams, GM Oprea.

Related to Industry Codes and Standards

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Industry Code means a code approved or determined by ICRC under Part 4 of the Act;

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Industry Standards means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Prudent Industry Practices means, at a particular time, any of the practices, methods and acts which, in the exercise of reasonable judgment, will result in the proper operation and maintenance of the assets owned by a Party or its Affiliates and shall include, without limitation, the practices, methods and acts engaged in or approved by a significant portion of the industry at such time with respect to the assets of the same or similar types as the assets owned by such Party or its Affiliates. Prudent Industry Practices are not intended to be limited to optimum practices, methods or acts, to the exclusion of all others, but rather represent a spectrum of possible practices, methods and acts which could have been expected to accomplish the desired result at a commercially reasonable cost in a reliable, safe and timely fashion, in compliance with the applicable limited partnership agreement and limited liability company agreement and in accordance with all applicable laws. Prudent Industry Practices are intended to entail the same standards as the Parties would, in the prudent management of their own properties, use from time to time.

  • Petroleum Industry Standards means the Definitions for Oil and Gas Reserves promulgated by the Society of Petroleum Engineers (or any generally recognized successor) as in effect at the time in question.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Prudent Industry Practice means such practices, methods, acts, techniques, and standards as are in effect at the time in question that are consistent with (a) the standards generally followed by the United States pipeline and terminalling industries or (b) such higher standards as may be applied or followed by the Xxxxx Entities in the performance of similar tasks or projects, or by the Partnership Entities in the performance of similar tasks or projects.

  • Regulatory Requirements means all applicable federal and state statutes, regulations, regulatory guidance, judicial or administrative rulings, requirements of Governmental Contracts and standards and requirements of any accrediting or certifying organization, including, but not limited to, the requirements set forth in a Product Attachment.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Applicable Laws and Regulations means all duly promulgated applicable federal, State and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits and other duly authorized actions of any Governmental Authority having jurisdiction over the relevant parties, their respective facilities, and/or the respective services they provide.

  • Codes of Practice shall have the meaning given to the term in Clause 1.2 of Schedule 3;

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Industry means those parties involved in the generation, transmission, distribution and retailing of electricity in New Zealand;

  • Data Protection Laws and Regulations means all laws and regulations, including laws and regulations of the European Union, the European Economic Area and their member states, Switzerland and the United Kingdom, applicable to the Processing of Personal Data under the Agreement.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Laws and Regulations means federal, state, local and foreign statutes, laws, ordinances, regulations, rules, codes, orders, constitutions, treaties, principles of common law, judgments, decrees or other requirements;

  • SAFE Rules and Regulations means collectively, the Circular 37 and any other applicable SAFE rules and regulations.

  • Regulatory Requirement means any law, regulation or court order, or any rule, direction, guideline, code, notice or restriction (whether or not having the force of law) issued by any regulatory authority, governmental agency (including tax authority), clearing or settlement bank or exchange, or industry or self-regulatory body, whether in or outside Hong Kong, to which HKICL, we or any other Participant or the respective affiliates or group companies, or you are subject or are expected to comply with from time to time.