Hydraulic Model definition

Hydraulic Model means the hydraulic model of the City’s Sewer Collection System that the City developed, calibrated and verified, and that EPA determined adequately represents, as of the Date of Lodging, the City’s Sewer Collection System.
Sample 1Sample 2Sample 3
Hydraulic Model means the hydraulic simulation model described in Exhibit 10.
Sample 1Sample 2
Hydraulic Model. , means a technically acceptable method for assessing the hydraulic response of a combined sewer system to a specific rainfall/runoff event, by quantifying the total volume of discharge and/or peak rate of discharge from one or more CSO points that result from control alternatives ranging from “doing nothing” to “complete CSO elimination”.
Sample 1

Examples of Hydraulic Model in a sentence

  • It also provides consultancy for River Engineering works involving Hydraulic Model Study, design of river training & protection measures.

  • Consideration should be given to the Future Pipe Diameter Map in the 2015 Water Distribution Hydraulic Model and Analysis for sizing and layout of mains to provide optimum capacity for fire protection and growth and to eliminate dead end mains.

  • Resolution authorizing Mott MacDonald to provide additional engineering services in connection with necessary calibration and model updates to the Water System Hydraulic Model supporting the Water Utility.

  • Jackson H., Jr. 1976 (Oct)."Divide Cut Drainage Structures, Tennessee-Tombigbee Waterway, Mississippi and Alabama; Hydraulic Model Investigation," TR H-76-18, US Army Engineer Waterways Experiment Sta- tion, Vicksburg, Miss.

  • Quantification of Shear Stress in a Meandering Native Topographic Channel Using a Physical Hydraulic Model.

  • Pumping Station, Capacity Assessment, and Hydraulic Model Evaluation Report The Masterplan 2011 included a “Capacity, Management, Operations, and Maintenance Self-Assessment Report”, “Flow Monitoring “, and “Hydraulic Model” of the North Little Rock Wastewater Utility’s facilities.

  • In-tract Hydraulic Model for potable and recycled systems in format acceptable to the District.

  • The work site is located at Office of the Chief Hydraulic Engineer, Hydraulic Model Centre, Hydraulic Study Department, Sick Line, NSD Area, Kolkata-700043.

  • The updated FRA shall incorporate the updated Hydraulic Model outputs as well as details of flood resilience measures including, for example, the setting of finished floor levels no lower than 600mm above the climate change level.

  • Within one hundred and eighty (180) Days after EPA approval of the Hydraulic Model Report, Columbia shall submit to EPA and DHEC for review, comment, and approval a Capacity Assurance Program (“CAP”).

Related to Hydraulic Model

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Model shall refer to a particular brand of Vehicle sold by an OEM (e.g., Taurus, Tahoe, Grand Caravan).

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Modules means the Base Modules and Extended Modules.

  • Fabrication means making up data or results and recording or reporting them.

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • Flue means a passage for conveying the products of combustion from a gas appliance to the external air.

  • Fuel system means the components which store or transport fuel on board the vehicle and comprise the fuel tank system, all fuel and vapour lines, any non-tank mounted fuel pumps and the activated carbon canister.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • NACE means National Association of Corrosion Engineers

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Clinker means the product of a Portland cement kiln from which finished cement is manufactured by milling and grinding.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Fuel cell means an energy converter transforming chemical energy (input) into electrical energy (output) or vice versa.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • VCSE means a non-governmental organisation that is value-driven and which principally reinvests its surpluses to further social, environmental or cultural objectives.

  • Fuel means any solid, liquid or gaseous combustible material;

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.