Hot water heater means a closed vessel designed to supply hot water for external use to the system. All vessels must be listed by a nationally recognized testing agency and shall be protected with an approved temperature and pressure safety relief valve and shall not exceed any of the follow- ing limits:
Hot water heater means a closed vessel designed to
Examples of Hot water heater in a sentence
Hot water heater means a closed vessel with a capacity of no more than 120 U.S. gallons in which water is heated by combustion of gaseous, liquid, or biomass fuel and hot water is withdrawn for use external to the vessel.
Hot water heater also means a tankless unit that provides on-demand hot water.
The cost of the following services applicable to the premises shall be paid as follows: LANDLORD TENANT LANDLORD TENANT Gas Cable TV Oil Condominium/Cooperative fees Electricity Garbage Removal Hot water heater rental Other: ..........................................
For example, mixer, blender, slicer, food processor, ice machine, soda fountain, milkshake machine, work tables, etc. Dry storage shelving - must be smooth, durable and easily cleanable. Hot water heater - make, model number, and capacity. Equipment schedule indexed to floor plan.
Hot water heater must have a pressure relief valve and discharge line; there must be an adequate, safe source of heat; no leaking plumbing.
More Definitions of Hot water heater
Hot water heater means a closed vessel designed to supply hot water for external use to the sys- tem.
Hot water heater means a closed vessel designed to supply hot water for external use to the sys- tem. All vessels must be listed by a nationally recog- nized testing agency and shall be protected with an approved temperature and pressure safety relief valve and shall not exceed any of the following limits:
Hot water heater means a closed vessel designed to supply hot water for external use to the system. All vessels must be listed by a nationally recognized testing agency and shall be protected with an approved temperature and pressure safety relief valve and shall not exceed anyof the following limits: * Pressure of 160 psi (1100 kpa); * Temperature of 210 degrees F (99°C).
Hot water heater means a closed vessel in which water is heated by the combustion of fuels, electricity, or any other source and withdrawn for external use to the system at pressures not exceeding 160 psig (1100 Kpa gage) and shall include the apparatus by which heat is generated and all controls and devices necessary to prevent water temperatures from exceeding 210 degrees F. (99 degrees C.).
Hot water heater means a closed vessel designed to supply hot water for external use to the system. All vessels must be listed by a nationally recognized testing agency and shall not exceed any of the following limits:
Hot water heater means the primary source of hot water for a residence. (2) The thermostat of a new water heater offered for sale or lease in this state for use in a residential unit, shall be preset by the manufacturer no higher than one hundred twenty degrees Fahrenheit (or forty-nine degrees Celsius) or the minimum setting on any water heater which cannot be set as low as that temperature. Water heating systems may utilize higher reservoir temperature if mixing valves are set or systems are designed to restrict the temperature of water to one hundred twenty degrees Fahrenheit. (3) Upon occupancy of a new tenant in a residential unit leased or rented in this state, if hot water is supplied from an accessible, individual water heater, the water heater shall be set by the owner or agent at a temperature not higher than one hundred twenty degrees Fahrenheit (forty-nine degrees Celsius) or the minimum setting on any water heater which cannot be set as low as that temperature. Water heating systems may utilize higher reservoir temperature if mixing valves are set or systems are designed to restrict the temperature of water to one hundred twenty degrees Fahrenheit. (4) Nothing in this section shall prohibit an owner of an owner-occupied residential unit or resident of a leased or rented residential unit from readjusting the temperature setting after occupancy. Any readjustment of the temperature setting by the resident relieves the owner or agent of an individual residential unit and the manufacturer of water heaters from liability for damages attributed to the readjustment by the resident. (5) The utility providing energy for any water heater under this section shall at least annually, include in its billing a statement: (a) Recommending that water heaters be set no higher than one hundred twenty degrees Fahrenheit or the minimum setting on a water heater which cannot be set as low as that temperature to prevent severe burns and reduce excessive energy consumption; and (b) That the thermostat of an individual water heater furnished in a residential unit leased or rented in this state to new tenants shall be set no higher than one hundred twenty degrees Fahrenheit or the minimum setting on a water heater which cannot be set as low as that temperature pursuant to chapter 19.27 RCW. (6) The manufacturer of a water heater under this section which is offered for sale or installed after July 24, 1983, shall have a tag attached to the thermostat access plate or immediately adjacent ...
Hot water heater means a closed vessel designed to supply potable (domestic) hot water for external use to the system.*All vessels must be listed by a nationally recognized testing agency.* Shall be protected with an approved temperature and pressure safety relief valve with the appropriate pressure and relieving capacity ratings. The hot water heater shall not exceed any of the following limits:* Pressure of 160 psi (1100 kpa);* Temperature of 210 degrees F (99°C).*120 gallons in capacity*200,000 Btu/hr (58.6 kW) Additional requirements:* Hot water heaters exceeding 120 gallons (454 liters) must be ASME code stamped;* Hot water heaters exceeding 200,000 Btu/hr (58.6 kW) input must be ASME code stamped. The board motioned and voted to approve the revisions with additional corrections as noted.Agenda Item 7.WAC 296-104-102 Inspection – What are the standards for in-service inspection?This revision is to adopt Part 4 of the 2017 NBIC for pressure relief devices. Mike Carlson, Department of Labor & Industries, WA proposed revising WAC 296-104-102 to adopt Part 4 of the 2017 NBIC for pressure relief devices as revised below: WAC 296-104-102Inspection—What are the standards for in-service inspection?Where a conflict exists between the requirements of the standards listed below and this chapter, this chapter shall prevail. The duties of the in-service inspector do not include the installation's compliance with other standards and requirements (environmental, construction, electrical, undefined industrial standards, etc.), for which other regulatory agencies have authority and responsibility to oversee.