Examples of Horizontal distance in a sentence
Horizontal distance is measured from the station’s antenna to the closest point on the transmission line.
Legend:Dimension X - Horizontal distance between hinge axis of the door and the rear axle of the motor.
EXTERNAL UNLOCK QUOTA A • Vertical distance between the center of the hinge and the center of the motor shaft.QUOTA B • Horizontal distance between the center of the hinge and the center of the motor shaft.
Horizontal distance between centers, 4 1/8 in.; inside diameter of tubes, 2.782 in.; thickness of tubesheets 11/16 in.; distance from tubesheet to opposite combustion−chamber sheet, 34¼ in.; measured from outside of tubesheet to outside of backplate; material, steel.
Horizontal distance between the vertical bars of the grate shall be approximately six (6) inches.
Horizontal distance of flaw shown on screen of the equipment shall be observed.
Vertical -The minimum lengths for vertical curves on the various street types are shown below: Street"K" FactorCrest Curve"K" FactorSag CurveClassification Minimum*Desirable**Minimum*Desirable**Local *Horizontal distance in feet required to effect a one (1.0) percent change in grade, where: AK = Lwhere L = Horizontal length in feet of parabolic vertical curve.
Student will be able to learn and understand the various basic concept and principles used in surveying like Chain Surveying, Compass Surveying, Plane Table Surveying, and Levelling Surveying.2. Student will be able to learn and understand various instrument used in surveying.3. Student will learn and understand how to calculate Area of plot and Ground.4. Student will learn and understand about Horizontal Angle, Vertical Angle, Horizontal distance and Vertical distance to study the ground profile.
Horizontal distance beginning at the end of and at the elevation of the primary surface and sloping upward from the end of the primary surface.
Following guidelines as given in IS 456 shall be followed in case of difficulties or shall be carried out as directed by the EIC.a) Horizontal distance between two parallel main reinforcing bars shall usually not be less than the greatest of the following.