Heat output definition

Heat output means the enthalpy of the working fluid
Sample 1Sample 2Sample 3
Heat output means the enthalpy of a water heater's working fluid output.
Sample 1Sample 2Sample 3
Heat output means the total useful heat energy recovered from the combustion turbine as heat, expressed in megawatts.
Sample 1Sample 2Sample 3

Examples of Heat output in a sentence

  • In such cases, the tests may be continued using the heat output capacity as measured as the Manufacturer’s Rated Heat Output Capacity if requested by the manufacturer.

  • Data Summary Part A Θ Wfuel MCave Qin Qout Category Run No Load % Capacity Target Load Actual Load Actual Load Test Duration Wood Weight as-fired Wood Moisture Heat Input Heat Output Btu/hr Btu/hr % of max hrs lb % DB Btu Btu I < 15% of xxx XX 16-24% of max III 25-50% of xxx XX Max capacity Table 1B.

  • To reach the same total heat output, a lower temperature and higher flowrate or higher temperature and lower flowrate can result in the same Gross Well Heat Output.

  • Heat Output The Heat Output field displays the percentage of full capacity that the heater is running at; for example, if the value in this field is 50%, the heater is running at half its capacity.


More Definitions of Heat output

Heat output has the meaning given to it in the Heat Purchase Agreement;
Sample 1Sample 2Sample 3
Heat output means the enthalpy of a water heater’s working fluid output.
Sample 1
Heat output means the product obtained by multiplying recovery efficiency, as defined by Section 6.1.3 of the Code of Federal Regulations, Title 10, Part 430, Subpart B, Appendix E, by the rated heat input capacity of the water heater.
Sample 1

Related to Heat output

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Pressure means the total load or force per unit area acting on a surface.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.