Group Standard definition

Group Standard means the Railway Group Standards issued by Railway Safety and Standards Board and sets out safety, technical and operational requirements, and good practice affecting railway system safety or the safety or interworking between Railway Group Members;
Sample 1Sample 2Sample 3

Examples of Group Standard in a sentence

  • Substances covered by this Group Standard must comply with the relevant provisions of the Hazardous Substances (Disposal) Notice 2017.

  • Substances covered by this Group Standard must comply with the relevant provisions of the Hazardous Substances (Packaging) Notice 2017.

  • Conditions of Group StandardThe conditions that specify the obligations and restrictions for substances covered by this Group Standard are set out in Schedule 1.

  • Any transitional measures that were in this Group Standard immediately prior to 1 December 2017 but have expired have not been included in this reissued Group Standard.

  • All other aspects of this Group Standard apply from 1 December 2017.

  • This Group Standard comes into force on 1 July 2006 and applies to substances under section 96B(2)(a), (b) and (c) of the Act.

  • Any materials incorporated by reference into a Group Standard that are published by any other party or organisation may be inspected free of charge during normal business hours at the ERMA New Zealand office.

  • Codes of practice that have been approved by ERMA New Zealand are a means of complying with the conditions of this Group Standard.

  • If an importer or manufacturer considers that this Group Standard applies to the importation or manufacture of a substance, then the importer or manufacturer is responsible for assigning the substance to this Group Standard.

  • HSNO approval number and group standard title:HSR002544 - Construction Products (Subsidiary Hazard) Group Standard 2006HSNO ControlsApproved HandlerNo data availableNew Zealand Inventory of Chemicals (NZIoC)All components are listed on the NZIoC Inventory.Regulatory referencesPreparation of Safety Data Sheets - Approved Code of Practice Under the HSNO Act 1996 (HSNO CoP 8-1 09-06).

Related to Group Standard

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Uniform standard means a standard adopted by the Commission for a Product line, pursuant to Article VII of this Compact, and shall include all of the Product requirements in aggregate; provided, that each Uniform Standard shall be construed, whether express or implied, to prohibit the use of any inconsistent, misleading or ambiguous provisions in a Product and the form of the Product made available to the public shall not be unfair, inequitable or against public policy as determined by the Commission.

  • 2%/25% Guidelines has the meaning set forth in Section 13.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • ECB €STR Guideline means Guideline (EU) 2019/1265 of the European Central Bank of 10 July 2019 on the euro short-term rate (€STR) (ECB/2019/19), as amended from time to time;

  • Fitch Guidelines means the guidelines, as may be amended from time to time, in connection with Fitch’s ratings of the VMTP Shares.

  • Common Reporting Standard means the standard for automatic exchange of financial account information in tax matters (which includes the Commentaries), developed by the OECD, with G20 countries;

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • national standard means a standard adopted by a national standardisation organisation and made available to the general public;

  • Community-Wide Standard means the standard of conduct, maintenance or other activity generally prevailing in the Community. Such standard may be more specifically determined by the Board of Directors of the Association. Such determination, however, must be consistent with the Community-Wide Standard originally established by the Declarant.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Contract Standard means such standard as complies in each and every respect with all relevant provisions of the Contract;

  • Renewable Portfolio Standard or “RPS” means a state or federal law, rule or regulation that requires a stated amount or minimum proportion or quantity of electricity that is sold or used by specified persons to be generated from Renewable Energy Sources.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Switching and Tagging Rules means the switching and tagging procedures of Interconnected Transmission Owners and Interconnection Customer as they may be amended from time to time.

  • Disturbance Control Standard or “DCS” shall mean the reliability standard that sets the time limit following a disturbance within which a balancing authority must return its Area Control Error to within a specified range.

  • Energy efficiency portfolio standard means a requirement to

  • Program Guidelines means any and all GLO-approved documents reflecting specific rules and regulations governing the implementation of the Program.

  • Categorical pretreatment standard or "categorical standard" means any regulation containing pollutant discharge limits promulgated by the environmental protection agency in accordance with sections 307(b) and (c) of the Act (33 U.S.C. section 1317) that apply to a specific category of users and that appear in 40 CFR chapter I, subchapter N, parts 405 through 471.

  • Valuation Guidelines means the valuation guidelines adopted by the Board, as amended from time to time.

  • European standard means a standard adopted by the European Committee for Standardisation, the European Committee for Electrotechnical Standardisation or the European Telecommunications Standards Institute and made available for public use;

  • Common Reporting Standard (CRS) means the Standard for Automatic Exchange of Financial Account Information (“AEOFAI”) in Tax Matters and was developed in response to the G20 request and approved by the Organisation for Economic Co-operation and Development (OECD) Council on 15 July 2014, calls on jurisdictions to obtain information from their financial institutions and automatically exchange that information with other jurisdictions on an annual basis. It sets out the financial account information to be exchanged, the financial institutions required to report, the different types of accounts and taxpayers covered, as well as common due diligence procedures to be followed by financial institutions.

  • international standard means a standard adopted by an international standardisation organisation and made available to the general public;

  • Modification Guidelines has the meaning provided in Section 2.1(a) of this Single Family Shared-Loss Agreement.

  • Australian Standard means a standard published by Standards Australia.