Gross Capacity definition

Gross Capacity means the gross capacity of the Facility and shall be as stated in Schedule 1;
Sample 1Sample 2Sample 3
Gross Capacity means, for a steam facility, the
Sample 1Sample 2
Gross Capacity means the gross ‘nameplate’ Capacity of the Source Facility and shall be as stated in Schedule 1: Part 2 (Description of Source Facility)3;
Sample 1

Examples of Gross Capacity in a sentence

  • Proposed Gross Capacity (MW).: b) Auxiliary Consumption (MW): c) Net Capacity (MW): d) Plant Load Factor (PLF) %: e) Net expected power generation per annum: …………….

  • Gross Capacity of the power plant is 225MWs on ISO condition with two Gas Turbines from GE France and a Steam Turbine from Siemens Sweden.

  • The Gross Capacity of 4000 MW or 4150 MW has no relevance to the Procurers since the Contracted Capacity which is arrived at after subtracting the Auxiliary Consumption is 3800 MW and has remained unchanged since the time of signing of the PPA.

  • Gross Capacity of Crane at Longest Radius & Lowest Boom Angle for this Lift: _ lbs.

  • All else equal, sites with lower temperatures and elevations would be preferred.6 Table 1: Estimated Western State Land Area and Generation Wind Potential for Wind Generation Assuming Gross Capacity Factor (GCF) of 35+% Land Area with 35+% GCFWind Capacity Potential 35+% GCF (MW) StateSource: NREL, 2015The quality of a given site’s resource due to potential wind speeds, wind consistency and given elevation can be summarized by a site’s potential gross capacity factor.

  • The refrigerant enthalpymethod Net Capacity shall be calculated from the Gross Capacity Measurement as follows.

  • The changes required in the existing PPA relates to changes in the Contracted Capacity and Gross Capacity of the project.

  • All the terms and conditions of the PPA as these applied to the existing Gross Capacity and Contracted Capacity prior to the change in Unit configuration should squarely be applied to the enhanced gross capacity and contracted capacity in the same way.

  • Gross Capacity, Energy, Loads, and Transmission (CELT)12 Loads For the summer peak load base cases, the 2023 Capacity, Energy, Loads, and Transmission (CELT) report was used to calculate the gross summer peak load demand levels for the base cases.

  • Gross Capacity shall be the capacity energy (kWh) of the entire battery pack and shall include usable, unusable, and/or reserve capacity energy.


More Definitions of Gross Capacity

Gross Capacity is a neutral alternative term that accurately reflects the concept. Author [A19] Utilities: rejected deletion of “maximum rated capacity or” because total Nameplate Capacity is still needed for certain parts of the impact study and should be maintained. SC Glossary of Terms 6 of an Affected System, or any combination of the above. Point of Interconnection – The point where the Interconnection Facilities connect with the Utility's System. Queue Number – The number assigned by the Utility that establishes an Interconnection Customer’s Interconnection Request’s position in the study queue relative to all other valid Interconnection Requests. A lower Queue Number will be studied prior to a higher Queue Number. The Queue Number of each Interconnection Request shall be used to determine the cost responsibility for the Upgrades necessary to accommodate the interconnection.
Sample 1
Gross Capacity shall have the meaning as set forth in Clause 10.1;
Sample 1

Related to Gross Capacity

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;