Fuel switching definition

Fuel switching means any project that replaces a heating system or industrial process using fossil fuels with a system or process that uses a different fuel and achieves lower net greenhouse gas emissions.[PL 2021, c. 358, §2 (NEW); RR 2021, c. 1, Pt. A, §40 (RAL).]
Sample 1Sample 2Sample 3
Fuel switching has the meaning set forth in Section 3.10(d).
Sample 1Sample 2
Fuel switching means changing from rate regulated natural gas to rate regulated electricity or from rate regulated electricity to rate regulated natural gas for a particular end-use service. It does not include installation of any device that relies primarily on on-site renewable energy, such as, but not limited to, a solar water heater, geothermal heat pump, or biomass gas-powered furnace. "Goal" means a target to be achieved by a utility’s Demand Portfolio. A goal may be expressed in thousand cubic feet, dekatherms, percentage reduction or limitation, and/or another quantifiable measurement approved by the Commission. When determining whether a goal is met,
Sample 1Sample 2

Examples of Fuel switching in a sentence

  • Fuel switching — Fuel switching plans for units for which fuel supply shortages may occur, e.g., gas and light oil.

  • Fuel switching only occurs if oil is the less expensive option for these plants.

  • Fuel switching is often done in cases where sources average their emissions to meet federal mandates.

  • Fuel switching to use oxy-fuel reduces fuel emissions by introducing pure oxygen to achieve hotter temperatures using less natural gas.

  • To obtain physical parameters for the Arches we compared the radial surface density profile with the empirical King density for- mula for the inner parts of a concentrated cluster (King 1962):idea of the differences that arise from these procedures we also computed IMF slopes from the average extinction.

  • Fuel switching may also be used as a seasonal compliance strategy (e.g., switching from residual fuel oil to natural gas in order to reduce NOx emissions during the ozone season.

  • Fuel switching (e.g. from high- to low-sulphur coals and/or liquid fuels, or from coal or liquid fuel to gas) leads to lower sulphur emissions, but there may be certain restrictions, such as the availability of low-sulphur fuels and the adaptability of existing combustion systems to different fuels.

  • Fuel switching is an important option to reduce dust emissions from combustion but is governed by country specific conditions such as infrastructure and energy policy.

  • Fuel switching can also have beneficial effects on nitrogen dioxide or particulate matter emission levels.

  • Fuel switching from natural gas to other fossil fuel derived energy sources shall not be included in the gas utility’s DSM program.


More Definitions of Fuel switching

Fuel switching means changing from natural gas to electricity or from electricity to natural gas for a particular end-use service or installing electric heating devices in new construction where natural gas service is available or can be economically made available. It does not include installation of any device that relies primarily on on-site renewable energy, such as, but not limited to, a solar water heater, geothermal heat pump, or biomass gas-powered furnace.
Sample 1
Fuel switching means changing the primary heating fuel used by a domestic energy user from coal, electricity or oil to a mains gas supply;
Sample 1
Fuel switching which means increasing the use of alternative fuels that have lower life- cycle GHG emissions from production through ultimate use, such as propane, natural gas, hydrogen produced from certain sources and ethanol from biomass.8
Sample 1
Fuel switching means changing from rate regulated natural gas to rate regulated electricity or from rate regulated electricity to rate regulated natural gas for a particular end-use service. It does not include installation of any device that relies primarily on on- site renewable energy, such as, but not limited to, a solar water heater, geothermal heat pump, or biomass gas-powered furnace.
Sample 1
Fuel switching means replacing an end-use technology (such as a heating system) with one that uses a different energy source (direct or indirect) in order to reduce energy costs, improve energy factor, reduce energy consumption, or lower greenhouse gas emissions.
Sample 1
Fuel switching means the act of changing from one type of fuel to a different type of fuel.
Sample 1

Related to Fuel switching

  • Fuel cell means an energy converter transforming chemical energy (input) into electrical energy (output) or vice versa.

  • Fuel system means the components which store or transport fuel on board the vehicle and comprise the fuel tank system, all fuel and vapour lines, any non-tank mounted fuel pumps and the activated carbon canister.

  • Customer-generator means a user of a net metering system.

  • End Office Switches (“EOs”) are switches from which end user Telephone Exchange Services are directly connected and offered.

  • Trunk means a communication line between two switching systems.

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.

  • Fuel means any solid, liquid or gaseous combustible material;

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Satellite means any satellite owned by the Issuer or any of its Restricted Subsidiaries and any satellite purchased by the Issuer or any of its Restricted Subsidiaries pursuant to the terms of a Satellite Purchase Agreement, whether such satellite is in the process of manufacture, has been delivered for launch or is in orbit (whether or not in operational service).

  • Rack means a mechanism for delivering motor vehicle fuel or diesel from a refinery or terminal into a truck, trailer, railroad car, or other means of non-bulk transfer.

  • Interconnector means equipment used to link the electricity system of the State to electricity systems outside of the State;

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Transit Passenger means a passenger who arrives at the airport in an aircraft and departs from the airport in the same aircraft, where such an aircraft is operating a through flight transiting the airport, and includes a passenger in transit through the airport who has to depart in a substituted aircraft because the aircraft on which the passenger arrived has been declared unserviceable.

  • NACE means National Association of Corrosion Engineers

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Loader means any type of off-road tractor with either tracks or rubber tires that uses a bucket on the end of movable arms to lift and move material; can be also referred to as a front-end loader, front loader, skid steer loader, backhoe, rubber- tired loader, or wheeled loader.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • End Office Switch or “End Office” means the switching machine that directly terminates traffic to and receives traffic from purchasers of local Exchange Services. An End Office Switch does not include a PBX.

  • Network Load means the load that a Network Customer designates for Network Integration Transmission Service under Tariff, Part III. The Network Customer’s Network Load shall include all load (including losses) served by the output of any Network Resources designated by the Network Customer. A Network Customer may elect to designate less than its total load as Network Load but may not designate only part of the load at a discrete Point of Delivery. Where an Eligible Customer has elected not to designate a particular load at discrete points of delivery as Network Load, the Eligible Customer is responsible for making separate arrangements under Tariff, Part II for any Point-To-Point Transmission Service that may be necessary for such non-designated load.