Frequency hopping definition

Frequency hopping. (5 6) means a form of "spread spectrum" in which the transmission frequency of a single communication channel is made to change by a random or pseudo-random sequence of discrete steps.
Sample 1Sample 2Sample 3
Frequency hopping. (Categories 5, 6) means a form of “spread spectrum” in which the transmission frequency of a single communication channel is made to change by a random or pseudo-random sequence of discrete steps; “frequency switching time” (Category 3) means the time (i.e. delay) taken by a signal when switched from an initial specified output frequency, to arrive at or within either of the following: a. ±100 Hz of a final specified output frequency of less than 1 GHz; or b. ±0.1 part per million of a final specified output frequency of equal to or greater than 1 GHz; “fuel cell” (Category 8) means an electrochemical device that converts chemical energy directly into Direct Current (DC) electricity by consuming fuel from an external source; “Full Authority Digital Engine Control System” or “FADEC System” (Category 9) means a digital electronic control system for a gas turbine engine that is able to autonomously control the engine throughout its whole operating range from demanded engine start until demanded engine shut-down, in both normal and fault conditions; “fusible” (Category 1) means capable of being cross-linked or polymerised further (cured) by the use of heat, radiation, catalysts, etc., or that can be melted without pyrolysis (charring); “guidance set” (Category 7) means systems that integrate the process of measuring and computing a vehicle’s position and velocity (i.e. navigation) with that of computing and sending commands to the vehicle’s flight control systems to correct the trajectory; “hybrid integrated circuit” (Category 3) means any combination of integrated circuit or circuits, or integrated circuit with ‘circuit elements’ or ‘discrete components’ connected together to perform one or more specific functions, and having all of the following characteristics: a. Containing at least one unencapsulated device; b. Connected together using typical IC production methods; c. Replaceable as an entity; and d. Not normally capable of being disassembled; Technical Note 1‘Circuit element’ means a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor,one capacitor, etc.
Sample 1

Examples of Frequency hopping in a sentence

  • Frequency hopping can be not supported for 60 GHz unlicensed band operation.

  • Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater.

  • Frequency hopping systems shall have hopping channel carrier fre- quencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hop- ping channel, whichever is greater.

  • Frequency hopping systems oper- ating in the 5725–5850 MHz band shall use at least 75 hopping frequencies.

  • Frequency hopping spread spec- trum systems are not required to em- ploy all available hopping channels during each transmission.

  • Frequency hopping systems in the 2400–2483.5 MHz band shall use at least 15 channels.

  • Frequency hopping systems may avoid or suppress transmissions on a par- ticular hopping frequency provided that a minimum of 15 channels are used.

  • Observation 11: Frequency hopping for legacy CG can be inherited by the multi-PUSCH CG with minimal specification impact.

  • Frequency hopping Spreadtrum, xiaomi, Sharp, ZTE, InterDigital, Ericsson, Nokia, NSB, CTC, LG, Qualcomm vivo, CMCC, Samsung, HW, HiSilicon, NTT DOCOMO Precoder cycling Nokia, NSB Sharp, CMCC, CATT, Ericsson For changing of transmission parameters and precoder cycling, companies’ views are summarized as follows:Transmission parameters need to be changed due to network-indicated operations, including: Tx power, UL beam/TPMI, and RB allocation.

  • Frequency hopping systems may avoid or suppress transmissions on a particular hopping frequency provided that a minimum of 15 channels are used.

Related to Frequency hopping

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Radio frequency identification (RFID means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

  • Frequency means the number of items occurring in each category. Frequency may be determined by analytical method or laboratory specific requirements for accuracy, precision of the analysis, or statistical calculation.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Field-flattening filter means a filter used to homogenize the absorbed dose rate over the radiation field.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Traffic lane or "lane" means that portion of a roadway designed or designated to accommodate the

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Air-to-ground radiotelephone service means a radio service, as that term is defined in 47 CFR 22.99, in which common carriers are authorized to offer and provide radio telecommunications service for hire to subscribers in aircraft.

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Basic generation service or "BGS" means electric generation

  • Hard cider means the same as that term is defined in 26 U.S.C. Sec. 5041.

  • Bicycle lane means that portion of a roadway designated by signs and/or pavement markings for