Form Factor definition

Form Factor means a physical device’s size, dimensions and configuration.
Form Factor means each of the ***.
Form Factor means an actual or virtual device or application, regardless of form and whether accessed online or offline or where the relevant account information is stored, including a digital wallet or mobile device application, that may be used to access an open-end private label or co-brand Credit Card account and is either (a) provided by the account issuer, or (b) is provided by a third party where the account issuer provides direct authorization for the device or application to access the issuer’s account.

Examples of Form Factor in a sentence

  • Internally pulled down per SFF-8431Pin-out of connector Block on Host board Recommended Circuit Schematic Mechanical SpecificationsSmall Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi- Sourcing Agreement (MSA).

  • Small Form Factor (SFF) Transceiver Multi-source Agreement (MSA).

  • Finisar’s Small Form Factor (SFF) transceivers comply with the standard dimensions defined by the Small Form Factor Multi-Sourcing Agreement (MSA).

  • Minimum cruise spec: 40% 0f Form- Factor at 16 feet D.O.B or 5 inch Top, and merchantable top.

  • In addition, they comply with the Small Form Factor Pluggable Multi Sourcing Agreement (MSA) and SFF-8472.

  • Finisar’s Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-Sourcing Agreement (MSA).

  • Finisar’s Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-Sourcing Agreement (MSA) 3.

  • In addition, they comply with the Small Form Factor Pluggable Multi Sourcing Agreement (MSA).

  • Small Form Factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 2000.2. Telcordia GR-253-CORE Specifications.

  • IEEE standard 802.3. IEEE Standard Department, 2002.2. Small Form Factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 2000.

Related to Form Factor

  • Fit factor means a quantitative estimate of the fit of a particular respirator to a specific individual, and typically estimates the ratio of the concentration of a substance in ambient air to its concentration inside the respirator when worn.

  • Interest Factor means monthly compounding, discounting or annuitizing, as applicable, at a rate set forth in Exhibit A.

  • Exchange Factor means 1.0; provided, however, that if the General Partner: (a) declares or pays a dividend on its outstanding Common Stock in Common Stock or makes a distribution to all holders of its outstanding Common Stock in Common Stock; (b) subdivides its outstanding Common Stock; or (c) combines its outstanding Common Stock into a smaller number of shares of Common Stock, the Exchange Factor shall be adjusted by multiplying the Exchange Factor by a fraction, the numerator of which shall be the number of shares of Common Stock issued and outstanding on the record date for such dividend, contribution, subdivision or combination (assuming for such purpose that such dividend, distribution, subdivision or combination has occurred as of such time), and the denominator of which shall be the actual number of shares of Common Stock (determined without the above assumption) issued and outstanding on the record date for such dividend, distribution, subdivision or combination. Any adjustment to the Exchange Factor shall become effective immediately after the effective date of such event retroactive to the record date, if any, for such event.

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Adjustment Factor means, with respect to a share of the Fund (or one unit of any other security for which a Fund Closing Price must be determined), 1.0, subject to adjustment in the event of certain events affecting the shares of the Fund. See “—Anti-dilution Adjustments Relating to the Fund; Alternate Calculation —Anti-dilution Adjustments” below.

  • Moody’s Discount Factor means, for purposes of determining the Discounted Value of any Moody’s Eligible Asset, the percentage determined by reference to the rating on such asset and the shortest Exposure Period set forth opposite such rating that is the same length as or is longer than the Moody’s Exposure Period, in accordance with the table set forth below: Exposure Period Aaa* Aa* A* Baa* Other** (V)MIG-1*** SP-1+**** Unrated***** 7 weeks 151% 159% 166% 173% 187% 136% 148% 225% 8 weeks or less but greater than seven weeks. 154 161 168 176 190 137 149 231 9 weeks or less but greater than eight weeks 158 163 170 177 192 138 150 240 * Mxxxx’x rating. ** Municipal Obligations not rated by Moody’s but rated BBB by S&P. *** Municipal Obligations rated MIG-1 or VMIG-1, which do not mature or have a demand feature at par exercisable in 30 days and which do not have a long-term rating. **** Municipal Obligations not rated by Moody’s but rated SP-1+ by S&P, which do not mature or have a demand feature at par exercisable in 30 days and which do not have a long-term rating. ***** Municipal Obligations rated less than Baa3 or not rated by Moody’s and less than BBB or not rated by S&P, not to exceed 10% of Moody’s Eligible Assets. Notwithstanding the foregoing, (i) except as provided in clause (ii) below, the Moody’s Discount Factor for short-term Municipal Obligations will be 115%, so long as such Municipal Obligations are rated at least MIG-1, VMIG-l or P-1 by Moody’s and mature or have a demand feature at par exercisable in 30 days or less, or 125%, as long as such Municipal Obligations are rated at least A-1+/AA or SP-1+/AA by S&P and mature or have a demand feature at par exercisable in 30 days or less, (ii) the Moody’s Discount Factor for residual interest municipal bonds and structured notes shall be the product of (x) the percentage determined by reference to the rating on the security underlying such residual interest municipal bond multiplied by (y) 1.25 (provided that the trust in which such residual interest municipal bond is held may be terminated within five business days), and (iii) except as provided in clause (ii) above, no Moody’s Discount Factor will be applied to cash, Receivables for Municipal Obligations Sold, or futures, options and similar instruments (to the extent such securities are Moody’s Eligible Assets); provided, however, that for purposes of determining the Moody’s Discount Factor applicable to a Municipal Obligation, any Municipal Obligation (excluding any short-term Municipal Obligation) not rated by Moody’s but rated by S&P shall be deemed to have a Mxxxx’x rating which is one full rating category lower than its S&P rating.

  • Note Factor means, with respect to a Payment Date and each Class of Notes, a six-digit decimal, which the Servicer will compute each month, equal to the Note Balance of such Class of Notes as of the end of the related Collection Period divided by the Note Balance of such Class of Notes as of the Closing Date. The Note Factor will be 1.000000 as of the Closing Date; thereafter, the Note Factor will decline to reflect reductions in the Note Balance of such Class of Notes.

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Discount Factor means the percentage discount applied to additional APCs when more than one APC is provided during the same visit (including the same APC provided more than once). Not all APCs are subject to a discount factor.

  • NET INVESTMENT FACTOR The net investment factor for each subaccount is determined by dividing (1) by (2) and subtracting (3) from the result, where:

  • Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Limited Indexation Factor means, in respect of a Limited Indexation Month or Limited Indexation Date, as the case may be, the ratio of the Index Figure applicable to that month or date, as the case may be, divided by the Index Figure applicable to the month or date, as the case may be, twelve months prior thereto, provided that (a) if such ratio is greater than the Maximum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Maximum Indexation Factor and (b) if such ratio is less than the Minimum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Minimum Indexation Factor;

  • Conversion Factor means 1.0, provided that in the event that the General Partner (i) declares or pays a dividend on its outstanding REIT Shares wholly or partly in REIT Shares or makes a distribution to all holders of its outstanding REIT Shares wholly or partly in REIT Shares, (ii) subdivides its outstanding REIT Shares, or (iii) combines its outstanding REIT Shares into a smaller number of REIT Shares, the Conversion Factor shall be adjusted by multiplying the Conversion Factor by a fraction, the numerator of which shall be the number of REIT Shares issued and outstanding on the record date for such dividend, distribution, subdivision or combination (assuming for such purposes that such dividend, distribution, subdivision or combination has occurred as of such time), and the denominator of which shall be the actual number of REIT Shares (determined without the above assumption) issued and outstanding on such date and, provided further, that in the event that an entity other than an Affiliate of the General Partner shall become General Partner pursuant to any merger, consolidation or combination of the General Partner with or into another entity (the “Successor Entity”), the Conversion Factor shall be adjusted by multiplying the Conversion Factor by the number of shares of the Successor Entity into which one REIT Share is converted pursuant to such merger, consolidation or combination, determined as of the date of such merger, consolidation or combination. Any adjustment to the Conversion Factor shall become effective immediately after the effective date of such event retroactive to the record date, if any, for such event; provided, however, that if the General Partner receives a Notice of Redemption after the record date, but prior to the effective date of such dividend, distribution, subdivision or combination, the Conversion Factor shall be determined as if the General Partner had received the Notice of Redemption immediately prior to the record date for such dividend, distribution, subdivision or combination.

  • Rating Agency Discount Factor means the Fitch Discount Factor (if Fitch is then rating Preferred Shares) or an Other Rating Agency Discount Factor, whichever is applicable.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Inflation Factor means a number determined for each tax year by dividing the consumer price index for June of the tax year by the consumer price index for June 2005.

  • Fitch Discount Factor means the discount factors set forth in the Fitch Guidelines for use in calculating the Agency Discounted Value of the Company’s assets in connection with Fitch’s ratings then assigned on the Preferred Shares.

  • Stress Factor means 2.25.

  • Pool Factor Means, as of any Distribution Date, the quotient (rounded to the seventh decimal place) computed by dividing (i) the Pool Balance by (ii) the original aggregate face amount of the Applicable Certificates. The Pool Factor as of any Distribution Date shall be computed after giving effect to any special distribution with respect to unused Deposits, payment of principal of the Equipment Notes or other Trust Property and the distribution thereof to be made on that date.

  • Certificate Factor With respect to any Class of Regular Certificates as of any Distribution Date, a fraction, expressed as a decimal carried to six places, the numerator of which is the aggregate Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates on such Distribution Date (after giving effect to any distributions of principal and allocations of Realized Losses in reduction of the Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates to be made on such Distribution Date), and the denominator of which is the initial aggregate Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates as of the Closing Date.

  • Power Factor means the ratio of usage power measured in kW to total power measured in kVA;

  • Pricing Level refers to the determination of which of Level I, Level II, Level III, Level IV, Level V or Level VI applies at any date.

  • Market Capitalization means an amount equal to (i) the total number of issued and outstanding shares of common stock or common equity interests of the IPO Entity on the date of the declaration of the relevant dividend multiplied by (ii) the arithmetic mean of the closing prices per share of such common stock or common equity interests for the 30 consecutive trading days immediately preceding the date of declaration of such dividend.