Examples of Final control in a sentence
If there is no effective date stated in such regulations, the ini- tial control date of such product or commodity is the date on which such regulations are filed for publications in the FEDERAL REGISTER.(iii) Final control date.
Final control elements: types and flow characteristics of control valves; construction details of control valves; power operators ---solenoid, pneumatic-diaphragm, power cylinder, and electric motor.
If there is no effective date stated in these regulations, the initial control date of the product or commodity will be thirty days after the effective date of the regulations which subject the product or commodity to short supply export controls.(iii) Final control date.
Final control elements, control panels, and ancillary equipment shall be tested under start-up and steady-state operating conditions to verify that proper and stable control is achieved using motor control center and local field mounted control circuits.
Final control devices, starters and transformers must be constructed and installed to ensure that their operation does not result in any dangerous generation of heat.
Final control plans for emission control systems or process modifica- tions must be submitted on or before June 1, 1974, for sources subject to § 52.1144(c)(1) and on or before May 1, 1974 for sources subject to § 52.1145.
Final control system design should be a contractor responsibility.
The SMAC pays special attention to the manner of work of deminers, whether they act in accordance with operation and safety procedures requested by the project documentation.▪ Final control: After receiving information from the contractor that the operations on a concrete site have been concluded, the SMAC commences the final control through an analysis of all previous completed controls, documentation on found mines and UXO and their destruction, documentation on executed works etc..
Module 4 (12 hours) Final control elements: I/P and P/I converter, Pneumatic and Electric actuators.
Laboratories performing this bioassay test shall be required to report the following data: • Initial and adjusted pore water salinities and pH of test and reference samples; • Initial light readings (I0) and final light readings (I5 or I15) for each replicate and the mean and standard deviation for each treatment; • Final control and reference mean light output; and • Any problems that may have influenced data quality.