Engineering Sample definition

Engineering Sample means sample Product(s) in wafer, Die or Package form provided to IXYS for purposes of promotion, evaluation and verification of a revised mask set.
Sample 1Sample 2Sample 3
Engineering Sample means a preliminary version of the Wafer provided by Supplier to Maxim from time to time for Maxim’s engineering, testing or other internal use purposes.
Sample 1Sample 2Sample 3
Engineering Sample or “Engineering Sample Prototypes” See Exhibit E -
Sample 1Sample 2

Examples of Engineering Sample in a sentence

  • TPC shall reserve the right to debit the supplier for all associated costs incurred as a direct result of nonconforming product or service manufactured, shipped, or received from supplier or sub supplier resulting in, but not limited to: TPC Production Interruptions, Customer Spills, End of Line failures, Warranty failures, Delays in PPAP Submission, or Engineering Sample rejections.

  • Parts marked as ES or E or accompanied by an Engineering Sample notification letter are not yet qualified and therefore not approved for use in production.

  • The organization shall conduct the PV testing on parts/products which were produced at "run at rate" (see Ford's Phased PPAP (phase 0) for a definition of "run-at-rate").Note 1: Where appropriate, Ford Product Development Engineering records initial sample part approval on the ESER – form 2973 (Engineering Sample Evaluation Report), form available internally to Ford through Ford Forms on EKB – Enterprise Knowledge Base.

  • Minimizing Reverse Engineering: Sample Language for Dual United States and European Union Software Licenses John T.

  • For each delivery Supplier must submit at least:  Engineering Sample Evaluation Report (ESER) including: - Dimensional conformance report - Material conformance report - Functional validation report  Material Safety Data Sheets  Component record sheet (traceability) & component maturity level (Suffix) All pre-production/pre-serial parts should be duly identified to avoid any mixture with other serial parts.

  • We noted that save for the fee quotes, other principal terms specified in the Engineering Sample Contracts entered into with China Telecom Group by the Group were no less favorable to the Company than those specified in the Engineering Sample Contracts entered into with independent third parties by the Group.

  • Smith Follow this and additional works at: https://digitalcommons.du.edu/djilp Recommended Citation John Soma, et al., Minimizing Reverse Engineering: Sample Language for Dual United States and European Union Software Licenses, 24 Denv.

  • The aforementioned specification is captured in “Exhibit E - Acceptance Test Criteria for 100G Module Samples” and evolves starting with Early Sample then Engineering Sample prototype.

  • Test Automation - Engineering Sample Questions 4Question 1 4Question 2 4Question 3 4Question 4 5Question 5 5Question 6 5Question 7 6Question 8 6Question 9 6Question 10 7Question 11 7Question 12 7Question 13 8Question 14 8Question 15 8Essay 1 9Essay 2 10Essay 3 11 0.


More Definitions of Engineering Sample

Engineering Sample is defined as: A sample version of the DSP Product that the basic functionality of the design that has yet to be proven and it has not gone though appropriate quality controls to ensure its functionality will adhere to the Specifications; and (ii) “X-Grade Product” is defined as: A sample version of the DSP Product for which the basic functionality of the design has been proven but has not yet gone through the appropriate quality controls to ensure its functionality will adhere to the Specifications. Engineering Samples are not guaranteed to operate in accordance with the Specifications or be error free; Masimo assumes all risks with use of these Engineering Samples in production mode.
Sample 1Sample 2
Engineering Sample. Engineering Samples have completed functional testing. The Engineering Samples are functioning in line with the Preliminary Product Specifications, but may contain errata. General Availability of Acacia’s 100G MSA module is achieved when the module has passed all regulatory and safety testing in accordance with the Product Specification. Samples from Acacia can be tested using Acacia’s 100G evaluation board or with the customer’s host board. First we outline the proposed tests for Mechanical Samples and next the Early Samples. Finally, we describe the proposed acceptance tests for Engineering Samples. Mechanical Samples As stated in Chapter 0, Mechanical Samples are non-functional mechanical-only samples that are provided to Strategic Partners to evaluate mechanical considerations like size and fit on customer host cards. The Mechanical Sample shall meet the specification outlined in Section 4.4 of the Advanced Product Specifications. The following acceptance tests performed by the costumer are proposed: Mechanical Dimensions Check Length, Width and Height of the module. Mounting Holes Check dimensions, alignment and host card fit of mounting holes. 168 Pin Connector Check attachment to the 168 pin Hirose connector. Location of Fiber Boots Check fiber exit boots for host card clearance and fiber routing. Fiber Pigtails Check fiber pigtail characteristics. Optical Connectors Check optical connector characteristics. Early Samples As stated in Chapter 0, Early Samples have undergone cursory functional tests in Acacia’s test lab. They are provided to Strategic Partners early in the product development phase to enable system bring-up at ambient room temperature with adequate airflow, and to provide early engineering feedback to Acacia. Complete functional testing and qualification has not been performed on the Early Samples. Since full functional tests have not been completed, Acacia cannot assure that Early Samples meet all specifications defined in Acacia’s Advanced Product Specification. For this reason there are no strict acceptance tests for Early Samples. However, Acacia assures Early Samples are functional and will transmit and receive data. A set of proposed tests for Early Samples are given below: Mechanical Design Mechanical Dimensions Record mechanical dimensions. Module to Host Card Mating and Assembly Check host card mating and attachment to assure compatibility. Heat Sink Dimensions and Host Card Fit Check heat sink fit with host card. Optical Fib...
Sample 1
Engineering Sample. Engineering Samples have [**]. General Availability of [**] Mechanical Samples As stated in Chapter 0, Mechanical Samples are [**] Early Samples As stated in Chapter 0, Early Samples have [**]. Confidential Materials omitted and filed separately with the Securities and Exchange Commission. A total of three pages were omitted. [**] Engineering Samples As stated in Chapter 0, Engineering Samples have [**] Confidential Materials omitted and filed separately with the Securities and Exchange Commission. A total of four pages were omitted. [**] General Availability (G.A.) The G.A. module should [**]. To Strategic Partnering Agreement This amendment entered into as of the 1st day of July 2013 (the “Amendment”), amends the Strategic Partnering Agreement, effective as of 8 March 2011 (“Agreement”), by and between Acacia Communications, Inc., with a place of business at Three Clock Xxxxx Xxxxx, Xxxxx 000, Xxxxxxx, XX 00000, XXX (“Acacia”) and ADVA Optical Networking North America, Inc., with a place of business at 0000 Xxxxxxxxx Xxxxxxxxxx Xxxxxxxxx, Xxxxxxxx, XX 00000, XXX (“ADVA”), collectively the Parties.
Sample 1
Engineering Sample. Engineering Samples have completed functional testing. The Engineering Samples are functioning in line with the Preliminary Product Specifications, but may contain errata. General Availability of Acacia’s 100G MSA module is achieved when the module has passed all regulatory and safety testing in accordance with the Product Specification. Samples from Acacia can be tested using Acacia’s 100G evaluation board or with the customer’s host board. First we outline the proposed tests for Mechanical Samples and next the Early Samples. Finally, we describe the proposed acceptance tests for Engineering Samples.
Sample 1
Engineering Sample means sample Product(s) provided to Customer for the purpose of Customer’s and/or Customer’s customer’s internal evaluation and verification. Engineering Sample may contain Samsung Deliverables and/or Customer Deliverables.
Sample 1

Related to Engineering Sample

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Drug sample means a unit of a prescription drug that is not intended to be sold and is intended to promote the sale of the drug.

  • Batch means a specific quantity of Product that is intended to have uniform character and quality, within specified limits, and is produced according to a single manufacturing order during the same cycle of manufacture.

  • Manufacturing Site means a location where a manufacturing

  • engineering services means infrastructure for –

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.

  • Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.

  • Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Feedstock means a solid waste that will readily decompose during the composting process including but not limited to yard waste, agricultural waste, animal waste, food scraps, animal carcasses, raw rendering material, and mixed solid waste.

  • API means American Petroleum Institute.

  • Manufacturing Services means the manufacturing, quality control, quality assurance, stability testing, packaging, and related services, set forth in this Agreement, required to manufacture Product or Products from Active Materials and Components;

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Biodiesel blend means a fuel comprised of a blend of biodiesel fuel with petroleum-based diesel fuel, suitable for use as a fuel in a compression-ignition internal combustion diesel engine.