Engineering review definition

Engineering review means a study to determine the suitability of the interconnection equipment including any safety and reliability complications arising from equipment saturation, multiple technologies, and proximity to synchronous motor loads.
Sample 1Sample 2Sample 3
Engineering review means a study that may be under- taken by a public utility, in response to its receipt of a completed standard application form for interconnection, to determine the suitability of the installation.
Sample 1Sample 2Sample 3
Engineering review means a study, conducted under the interconnection standards superseded by R 460.901a – R 460.992, that determined the suitability of the interconnection equipment including any safety and reliability complications arising from equipment saturation, multiple technologies, and proximity to synchronous motor loads.
Sample 1Sample 2Sample 3

Examples of Engineering review in a sentence

  • Where data is in imperial units, the correct metric equivalent shall also be show on all submissions for Engineering review.

  • This approval requires documents to be submitted for Engineering review.

  • Where data is in imperial units, the correct metric equivalent shall also be on all submissions for Engineering review.

  • Engineering review of planning and/or zoning cases is for conceptual design only.

  • Where data is in imperial units, the correct metric equivalent shall also be shown on all submissions for Engineering review.

  • Notice of rejection may be given in any reasonable form, including but not limited to Quality Notifications, Discrepancy Reports, Inspection Reports, Engineering review sheets, annotations on Shipping Instructions or communications via telephone, e-mail, facsimile, or other correspondence.

  • Conduct a Value Engineering review, including Life Cycle Cost, evaluations for alternate materials and systems prior to the beginning of the Construction Documents phase.

  • Evaluate preliminary documents for constructability, value opportunities and scheduling at each phase of design.2. Participate and assist in planning meetings.3. Provide estimates at the Construction Document phase and an estimated monthly construction payment schedule to assist the owner with financial budgets.4. Conduct a Value Engineering review, including Life Cycle Cost, and evaluations for alternate materials and systems.5. Prepare and submit cash flow analysis to Owner.

  • Notice of rejection may be given in any reasonable form, including but not limited to Quality Notifications, Discrepancy Reports, Inspection Reports, Engineering review sheets, annotations on Shipping Instructions, or communications via telephone, e-mail, facsimile, or other correspondence.

  • Engineering review of planning and/or zoning cases is for conceptual design only and does not represent final design approval nor shall it entitle applicants to future designs that are not in conformance with Section 1205 of the Maricopa County Zoning Ordinance and Drainage Policies and Standards; Floodplain Regulations for Maricopa County; and the MCDOT Roadway Design Manual.


More Definitions of Engineering review

Engineering review means a third party engineering review by a licensed professional engineer that confirms the Renewable Diesel Project has achieved Mechanical Completion.
Sample 1Sample 2Sample 3
Engineering review means a study or studies that may be undertaken by a public utility, in response to its receipt of a completed standard application form for interconnection, to determine the suitability of the installation and the need for a distribution system study.
Sample 1Sample 2
Engineering review means a study, conducted under the interconnection
Sample 1
Engineering review means a study, conducted under the interconnection standards superseded by R 460.901a to R 460.992, that determined the suitability of the
Sample 1
Engineering review means the review by BC Hydro, in accordance with commonly accepted engineering principles, of a customer claim related to changes in annual energy consumption as described in sections 6.1.2 and 6.1.3.
Sample 1
Engineering review has the meaning set forth in Section 7.17.
Sample 1

Related to Engineering review

  • Independent Engineering Report means a report, in form and substance satisfactory to the Administrative Agent and each of the Lenders, prepared by an Independent Engineer, addressed to the Administrative Agent and the Lenders with respect to the Oil and Gas Properties owned by the Borrower or its Subsidiaries (or to be acquired by the Borrower or any of its Subsidiaries, as applicable) which are or are to be included in the Borrowing Base, which report shall (a) specify the location, quantity, and type of the estimated Proven Reserves attributable to such Oil and Gas Properties, (b) contain a projection of the rate of production of such Oil and Gas Properties, (c) contain an estimate of the net operating revenues to be derived from the production and sale of Hydrocarbons from such Proven Reserves based on product price and cost escalation assumptions specified by the Administrative Agent and the Lenders, and (d) contain such other information as is customarily obtained from and provided in such reports or is otherwise reasonably requested by the Administrative Agent or any Lender.

  • Initial Engineering Report means the engineering report concerning Oil and Gas Properties of Loan Parties dated as of June 30, 2006 prepared by Netherland, Xxxxxx & Associates and XxXxxxxx & XxxXxxxxxxx.

  • Engineering Report means either an Independent Engineering Report or an Internal Engineering Report.

  • Engineering Reports has the meaning assigned such term in Section 2.07(c)(i).

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • engineering services means infrastructure for –

  • Geotechnical engineer means a professional engineer registered with the Association of Professional Engineers, Geologists, and Geophysicists of the Northwest Territories and whose principal field of specialization is the design and construction of earthworks in a permafrost environment;

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.

  • conformity assessment body means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

  • Independent Engineer means XxXxxxxx and XxxXxxxxxxx or any other third party engineering firm acceptable to the Administrative Agent in its sole discretion.

  • Good Engineering Practice means, Works carried out in accordance with the following standards/ specifications,

  • Feasibility Study means the evaluation and analysis of the potential of a project, which aims at supporting the process of decision-making by objectively and rationally uncovering its strengths and weaknesses, opportunities and threats, as well as identifying the resources required to carry it through and ultimately its prospects for success;

  • Architect/Engineer (A/E means a person registered as an architect pursuant to Tex. Occ. Code Ann., Ch. 1051, as a landscape architect pursuant to Tex. Occ. Code Ann., Ch. 1052, a person licensed as a professional engineer pursuant Tex. Occ. Code Ann., Ch. 1001, and/or a firm employed by Owner or Design-Build Contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Project Architect means the architect retained by Lessee to design and supervise construction of the Improvements.

  • Benchmarking Report means the report produced by the Supplier following the Benchmark Review and as further described in this Framework Schedule 7;

  • Architect/Engineer or “A/E” means the Person identified in the Agreement responsible for providing professional design services and construction contract administration for the Project. The A/E shall be (1) a registered architect holding a license and certificate of authorization issued by the Ohio Architects Board pursuant to ORC Chapter 4703, (2) a landscape architect holding a license and certificate of authorization issued by the Ohio Landscape Architects Board pursuant to ORC Chapter 4703, or (3) a professional engineer or professional surveyor holding a license and certificate of authorization issued by the Ohio Engineers and Surveyors Board pursuant to ORC Chapter 4733. As used in the Agreement, the term A/E may include a criteria architect or engineer for a Design-Build project.

  • Periodic Review means a review conducted by Ofwat for the purpose of determining one or more Price Controls in accordance with Part III of Condition B, but so that references in Part IV of Condition B to a Periodic Review shall exclude any review carried out under paragraph 11 of that Condition and shall include the determination by the Competition and Markets Authority of the relevant questions or, as the case may be, the disputed determination referred to it under paragraph 16 of Condition B;

  • Utilization review means the prospective (prior to), concurrent (during) or retrospective (after) review of any service to determine whether such service was properly authorized, constitutes a medically necessary service for purposes of benefit payment, and is a covered healthcare service under this plan. WE, US, and OUR means Blue Cross & Blue Shield of Rhode Island. WE, US, or OUR will have the same meaning whether italicized or not. YOU and YOUR means the subscriber or member enrolled for coverage under this agreement. YOU and YOUR will have the same meaning whether italicized or not.

  • SBI Engineer means The Civil/Electrical Engineer in-charge of the Project, as nominated by the AGM (P&E), SBI, RAJKOT

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Laboratory or “LANL” means the geographical location of Los Alamos National Laboratory, a federally funded research and development center owned by the DOE / NNSA.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • conformity assessment means the process demonstrating whether the requirements of this Regulation relating to a device have been fulfilled;

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Engineers Certificate" shall mean a certificate of the Consulting Engineers or of such other engineer or firm of engineers having a favorable repute for skill and experience in the engineering matters with respect to which such certification is required by this Master Indenture.